Attributes
- Farge:
Red
- Model Number: -
- Leveringsvekt: 0,018kg
- Frakthøyde: 8mm
- Fraktbredde: 10mm
- Fraktlengde: 104mm
- UPC: 048615511221
LACQUER STIK Color Fill in Paint Stick er en spesialisert forbindelse designet for å forbedre synligheten av stemplinger eller graveringer på glatte overflater, noe som gjør den ideell for skytevåpen, deler og tilbehør.
Målende 4-5/8 tommer (11,7 cm) i lengde, er Lacquer Stick tilgjengelig i tre distinkte farger: Hvit, Gull og Svart. Dens semi-solide form tillater enkel påføring i gravert eller stemplet område, og den herder raskt for å skape et langvarig, permanent høydepunkt.
Kunder av LACQUER STIK Color Fill in Paint Stick setter pris på dens brukervennlighet og det holdbare finishet den gir. En kunde bemerket at stiften er "sterkt anbefalt for å fremheve graveringer på skytevåpen og andre metalloverflater", og understreker dens effektivitet i å forbedre synligheten av markeringer.
Å inkludere LACQUER STIK Color Fill in Paint Stick i ditt gunsmithing-verktøy gir en enkel og effektiv måte å forbedre gravert eller stemplet markeringer, og forbedrer både funksjonaliteten og estetikken til dine skytevåpen og tilbehør.
Red
Works for me. 25.02.2014
I used this on the "fire" position of my AR lower. It came out looking really nice and wasn't particularly troublesome. I cut off the very end to expose the soft inside of the stik and set to work. I applied it cold. It went on very easily, although it did take some persistence to get it into all the nooks and crannies. Once it was in place I set about wiping away the excess. It didn't seem very happy to be evicted from its new home, and it left some ghosting around the engraving I had filled. I tried several products along with some vigorous scrubbing to remove the ghosting: alcohol, nail polish remover, and Simple Green. The ghosting thinned a little, but was still very noticeable. Running out of options, I saw a bottle of Froglube, the liquid variety and said to myself "couldn't hurt". It took the ghosting right out, but left the fill in place. It's only just been applied so I can't speak to its durability.
Easy to use 27.11.2012
These lacquer sticks are pretty easy to use. I heat the lacquer stick with a heat gun as well as the work area. I then rub the stick on the item I'm working on. Once enough has built up on the surface, I continue to heat the area with the heat gun so that it liquifies and fills the recessed areas of the item. Once sufficiently coated, I allow the item to cool down. I then use a cleaning patch with some mineral spirits to wipe the area. The goal is to wipe off the high areas and leave the lacquer in the recessed areas. This works quite well. The only issue is solvents and cleaners will easily damage these paint filling.
Vi opplevde en feil under innlasting av dette innholdet. Vennligst last inn siden på nytt for å fortsette. Hvis problemet vedvarer, ta kontakt med kundeservice.