Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
080561000
Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
1849 1849 1 NOK
Produktnr.: 080561000
BROWNELLS JAMES B. MEEK BEGINNER'S KIT Vi spurte James B. Meek, forfatteren av The Art Of Engraving, om hans anbefalinger. Dette er hva han skrev: "Omtrent 90% av all scrollarbeid i gravering kan gjøres med følgende verktøy". Point Graver No. 4 vil kutte de fleste scrolls. Fine detaljer kuttes med 0 Point. Knife No. 2 brukes også til detaljer. Square er kanskje det mest brukte, kan også slipes som et punkt, eller en meisel, Flat Nos. 36 og 37, og Round Nos. 50 og 54 trengs for bokstaver på høy relieff. Settet inneholder: Point - Nos. 0 og 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 og 39; Knife - No. 2; Round - Nos. 50 og 54. 9 gravører totalt.
1849 NOK 0 kr 1 849,00 *
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Attributes

Leveringsvekt: 0,091kg Frakthøyde: 58mm Fraktbredde: 61mm Fraktlengde: 173mm

Elementdetaljer

Made in USA



Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
Nyhetsbrev