Min side
(Logg inn)

Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

fraktprisen_topp_970_50

CLYMER GO/NO-GO GAUGE SETS

7.62x39 Headspace Gauge Kit

Auto-oversatt beskrivelse (Beskrivelse - Produsent): 7.62x39 Headspace Gauge Mer...

Produktnr.: 184000039 184000039

Headspace Gauge Sets In Popular Rifle & Pistol Calibers

Convenient kits contain Go and No-Go gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case.

SPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.

Mer...

Headspace Gauge setter i populære Rifle & Pistol kaliber

Praktisk pakkene inneholder gå og No-Go målere for nøyaktig kontroll kammer lengde for å sjekke at den oppfyller SAMISKE spesifikasjoner. Disse målere er viktige verktøy for å sikre et tett, presis, sikker kammer når chambering en ny fat. Alltid har et sett på hånden for å se etter riktig headspace før kjøp eller skyte en pistol. Leveres i en praktisk, slitesterk plast bæreveske.

Spesifikasjoner: stål, presisjon maskinert SAMISKE spesifikasjoner. Hvert sett inneholder en gå gauge og en no-go måle i en enkelt kaliber som er oppført under.

Mer...

Kundevurderinger for 7.62x39 Headspace Gauge Kit

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,9

Just the Right Tool (12.10.2012)

I bought the set of .223 Clymer's along with the Colt Field 5.56 Gauge to verify my headspace on a new AR build. They worked great and were easy to use. I used a small magnetic tipped rod to remove them which also worked great. You cant go without them becuase your buddies don't have them either. If in doubt, check your headspace! Beats a trip to the emergency room and these are far cheaper. Besides, your wallet heals easier.

Great Tool (12.10.2012)

I bought the set of these Go/No-Go along with the Colt 5.56 Field Gauges to check the headspace on my new AR build. I bought a complete upper and a new BCG and really needed to know about the headspace. I for one can say if something "Can go wrong", it will go wrong with me and ruin a great day. Although this set may have a limited use, they are necessary to make completely sure you don't destroy your rifle and/or your great looks. A little pricey but my buddies didn't have these...but I do now. Better safe than sorry!!! The price was cheaper than a trip to the emergency room by far.

Only way to b shure (30.03.2017)

Ordered this gauge set to check my ar build. They come nicely packaged and they proved their purpose. I really prefer to know if headspace is acceptable before I pull the trigger the first time. Maybe a bit spendy, but I'm guessing you could probably sell them and recoupe most of the cost. Gonna keep mine, kinda got the bug now, might just build another one.

Not the best but they will work. (01.11.2009)

Clymer gauges are great but brownell was a little off. There was surface rust on one the gauges. It cleaned up fine but i shouldnt have to deal with it on a new gauge. The "handy, durable plastic carrying case" is a clear endmill/drill case. Over all it will work fine for what I need.

headspace guages (09.04.2013)

Only dealer i could find these guages from, will be getting others as needed.
Al Burt

Works great (25.11.2014)

Bought this set for my home built VZ58. These worked great! I had to press fit the barrel against the bolt with the go gauge inserted as the stop. From my one time use of this product using it as a press stop it was very durable showing no marks. Great product. I will buy Clymer again when I get to my 1911 build I've been putting off.

Excellent Gauge Kit (09.12.2016)

This set of gauges worked perfectly on a few AK builds. Very easy to use and they are precise. All new AK builds need to be head-spaced. Rifles function flawlessly!

Necessary Tool (16.12.2017)

Checking head space was easier than I thought. These gauges were quick and easy to use and the findings gave me a confident feeling about the new bolt that I installed on my AR 7.62x39. They should be handle with care as to not put any dings or scratches on them.

[...] a great set of gauges (01.02.2010)

[...] had a very nice surface finish. I used them to check the headspace of a FN FAL and they worked great. A must if your building a mil spec rifle that will shoot 7.62 X 51 and .308 Winchester.

.308 gauge (12.09.2013)

used it to headspace my m1a with criterion barrel.
the gauges are perfect !
awesome product

Les 10 flere anmeldelser fra brownells.com

1048 1589 12 NOK

184000039
7.62x39 Headspace Gauge Kit
Produsentnr.: GONG762X39 7.62x39 Headspace Gauge Kit

1048 NOK 50 kr 1 048,00 *

10+ på lager

Spesifikasjoner: Cartridge: 7.62 x 39 mm Style: Gauge Kit

CLYMER GO/NO-GO GAUGE SETS

7.62x39 Headspace Gauge Kit

Kundevurderinger for 7.62x39 Headspace Gauge Kit

Beskrivelse

Attributes

Elementdetaljer

Kundevurderinger for 7.62x39 Headspace Gauge Kit