Attributes
- Modell:
Universal Rifles
- Våpentype:
Savage Arms
- Leveringsvekt: 0,068kg
- Frakthøyde: 18mm
- Fraktbredde: 76mm
- Fraktlengde: 157mm
- UPC: 050806008236
Produktnr.: 080097002
050806008236 Fjærbelastet verktøy gir konstant, rett bakovertrykk for å holde bolt lugs firkantet mot mottakeren mens du lapper med 600 til 800 grit, silisiumkarbid slipemiddel. Gir bedre resultater enn bare tommeltrykk. Utbyttbare gjengede sleeves passer til populære handlinger oppført nedenfor.Leveringstid ca. 14-21 dager.
Dette fjærbelastede verktøyet gir konstant, rett trykk for å holde bolt-lugger kvadratiske mot mottakeren mens du lapper med 600 til 800 grit, silisiumkarbid-abrasiv. Det gir bedre resultater enn bare tommeltrykk. Utbyttbare gjengede skjermer passer til populære handlinger oppført nedenfor.
M14/M1A settet inkluderer stor diameter plunger og spesial lapping håndtak som kreves for disse modellene. Mauser Large skjerm passer til store ring Mauser handlinger. Mauser Small passer til små ring Mauser handlinger. Savage Small skjerm passer til Savage handlinger i alle kalibre unntatt Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM), og Win Short Mag (WSM). Savage Large skjerm passer kun til Savage handlinger i RUM, RSUM, og WSM kalibre. Ett Gun Set inneholder bolt verktøy kropp, plunger, og korrekt størrelse skjerm for modellen oppført. M14/M1A One Gun Set inneholder bolt verktøy kropp, stor diameter plunger, korrekt størrelse skjerm, samt spesial skjerm og spesial bolt lapping verktøy unikt for M14/M1A/M1 Garand.
Sett inneholder alle verktøy som er nødvendige for å lappe alle modeller oppført i tabellen. *Spesialpris, se nedenfor.
Universal Rifles
Savage Arms
Very nice fit of parts. 31.08.2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Vi opplevde en feil under innlasting av dette innholdet. Vennligst last inn siden på nytt for å fortsette. Hvis problemet vedvarer, ta kontakt med kundeservice.