Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
793811764642 100047158
The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
549 549 1 NOK
Produktnr.: 100047158
STRIKE INDUSTRIES 17 ROUND MAGAZINE FOR GLOCK 17
Produsentnr.: SIGMAG17 793811764642 Strike Magazine for GLOCK™ G17 (9mm) er et høyfasthet, støtsikkert dobbeltstabel pistolmagasin laget av en spesiell SI Polymer Extreme blanding som inkluderer en gjennomsiktig kropp for rask synlighet av ammunisjon og en spesielt utvalgt fjær for økt pålitelighet. Kapasiteten på det 17+ runders gjennomsiktige magasinet er designet med strategisk plasserte teksturerte og ikke-teksturerte overflater. Teksturert der det er nødvendig for å redusere glansen fra messing og gi et positivt grep. Ikke-teksturert på den ene siden for ultra-klar synlighet av antall skudd og hva som skjer inni. Magasinet er ikke bare gjennomsiktig, det har også hjørnevisning for å gi deg alternative vinkler for å se hvor mange skudd du har igjen til kampen. Magasinutløserkutt er designet på begge sider av SI-magasinet og er kompatibelt med høyre, venstre og ambidekstrøse utløseroppsett som finnes på fabrikkens GLOCK™ GEN3-GEN5 rammer. Strike Magazine for GLOCK™ G17 har en innebygd krokspor spesielt for SI Extended Magazine Plate (EMP) stål låseplate for ekstra sikkerhet ved økning av kapasiteten, men bunnskiven som følger med har også fremtredende trekk. Sidekutt på bunnskiven gir enklere grep. Malbare trekantmarkører på toppen av magasinkroppen for å hjelpe til med å identifisere at magasinet er i riktig retning ved omlading. ID-markører på bunnen av bunnskiven lar deg merke magasinene dine og sørger også for at ingen tar med seg dine ting hjem. Sammen med sidekuttene har bunnskiven også en ekstra frontleppe for et økt fotavtrykk som hjelper med å stå magasinet for å gi det litt balanse. Den medfølgende bunnskiven er et verktøyfritt demonteringsdesign for rask og enkel fjerning med et enkelt trykk med neglen. Strike Magazine for GLOCK™ G17 (9mm) er fullastet med funksjoner som et alternativt valg som bør fylle veggene i ditt våpenskap og våpenbag. KOMPATIBEL: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) MERK: Ikke for salg til innbyggere i California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont og Washington DC på grunn av statlige lover om 10 eller 15-runders magasiner. Utsjekkingsprosessen vil vise at ingen fraktmetode er tilgjengelig. LENGDE 125,55 mm BREDDE 28,5 mm HØYDE 41,88 mm Produktfunksjoner: -Kapasitet: 17+ skudd -Gjennomsiktig magasinkropp med strategisk plasserte teksturerte og ikke-teksturerte overflater -Teksturert der det er nødvendig for å redusere glans av messing og gi et positivt grep -Ikke-teksturert på en side for ultra-klar synlighet av skuddtelling -Hjørnevisning gir alternative vinkler for å se ammunisjonstellingen fra siden eller bak på magasinkroppen -Økt fjærstyrke for pålitelighet -Ambidekstrøse magasinutløserkutt -Sidekutt på bunnskiven gir enklere grep -Malbare trekantmarkører på toppen av magasinkroppen for å hjelpe til med å identifisere riktig retning ved omlading -ID-markører på bunnen av bunnskiven -Frontleppe på bunnskiven for økt fotavtrykk når magasinet står -Den medfølgende bunnskiven har et verktøyfritt demonteringsdesign for rask og enkel fjerning -Innebygd krokspor spesielt for SI Extended Magazine Plate (EMP) stål låseplate for ekstra sikkerhet ved økning av kapasiteten -Høyfasthet, støtsikker, spesialblandet SI Polymer Extreme
549 NOK 0 kr 549,00 *
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner: Capacity: 17-Round Cartridge: 9 mm Luger Finish: Translucent Make: Glock Material: Polymer Modell: 17 Antall: 1

Attributes

Cartridge: 9 mm Luger Finish: Translucent Kapasitet: 17-Round Make: Glock Material: Polymer Modell: 17 Leveringsvekt: 0,045kg Frakthøyde: 32mm Fraktbredde: 102mm Fraktlengde: 191mm

Elementdetaljer

US eksport klassifisering: 0A501.d



The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
Nyhetsbrev