Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

TANGODOWN
ENHANCED SLIDE STOP for GLOCK®

955707100549 100007477

Optimum Shape To Ensure Positive Thumb Contact

Redesigned thumb pad places the pad slightly forward of the factory position, so your thumb gets to it quicker and returns the pistol to battery faster. Pad is shaped to aid in positive contact to help prevent accidental slide stop engagement, even when you’re wearing gloves. Stamped and formed from durable 4130 steel, then treated with a special hardcoat finish that resists rust and wear.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

SPECS: 4130 chromoly steel, black, matte finish/ includes spring. Fits Glock 3 Pin guns 17, 17L, 18, 19, 21, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34 and 35. Will not fit early 2 pin G-17, G-17L, or G-19 guns. Gunsmith installation recommended.

Mer...

Optimal form for å sikre positiv kontakt med tommelen

Omformet tommelpute plasserer puten litt foran fabrikkposisjonen, slik at tommelen din når den raskere og returnerer pistolen til batteri fortere. Puten er formet for å hjelpe til med positiv kontakt for å forhindre utilsiktet engasjement av sleide stopp, selv når du har på deg hansker. Stanset og formet fra holdbart 4130 stål, deretter behandlet med en spesiell hardcoat-finish som motstår rust og slitasje.

“GLOCK” er et føderalt registrert varemerke av Glock, Inc. og er ett av mange varemerker eid av Glock, Inc. eller Glock Ges.m.b.H. Brownells er en uavhengig forhandler av deler og tilbehør til Glock-pistoler, og er ikke tilknyttet eller godkjent av Glock, Inc. eller Glock Ges.m.b.H. Bruken av Glock på denne siden er kun for å annonsere salget av Glock-deler eller komponenter. Som angitt i produktbeskrivelsene, er ikke alle deler og tilbehør på dette nettstedet offisielle Glock-produkter.

SPECS: 4130 krom-molybdenstål, svart, matt finish/ inkluderer fjær. Passer til Glock 3-pins pistoler 17, 17L, 18, 19, 21, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34 og 35. Vil ikke passe tidlige 2-pins G-17, G-17L, eller G-19 pistoler. Gunsmith installasjon anbefales.

Mer...

Kundevurderinger for TANGODOWN ENHANCED SLIDE STOP

Antall vurderinger: 14
Fra brownells.com: 14
Gjennomsnittsvurdering: 4,3

A definite improvement over OEM (03.06.2011)

Subjectively, this replacement part is an improvement over both Glock options, improving shooter control while maintaining a compact lever to minimize interference issues and/or inadvertent activation. It is very similar to that of the Smith & Wesson M&P pistol; if you like the slide stop on your S&W M&P, you'll like this one on your Glock.

Big improvement over stock (07.07.2011)

Makes it much easier to lock slide.

Also makes it easier to release.

Great texture.

Huge improvement over stock (26.12.2011)

Much quicker to activate than the standard or extended OEM slide release.

Must Have Item! (23.02.2012)

Kudos to TangoDown and Larry Vickers!

This is an easily installed product that allows you to have a superbly designed slide release on just about any Glock pistol.

This part is installed on all my Glock pistols (17 and 19) and works. No issues.

So - so (28.07.2012)

I got this to, ideally, enhance my purchase on the slide lever when locking the slide back in malfunction drills. It does work well for that, so I will likely be keeping it installed unless I find the increased width puts me at risk for riding the lever.

Points deducted however for the sharp edges on the front and back of the handle. A little more rounding would be more ideal for a tool that may be pressed against your skin.

The aforementioned increase in width, although this is the same reason it is effective for my purpose, it does make it more prone to riding the slide lever and preventing last round lock.

Most importantly, it is not mentioned that this product is NOT COMPATIBLE with my Gen 2 Glock 17, and I would assume all Gen 2's. The design of the lever is completely different and it could cause premature lockback on a still loaded mag and/or prevent you from slingshoting the slide on reloads.

Simple solution (13.08.2012)

LAV designed this simple solution to gaining a more positive control when performing a slide lock reload. I don't sling shot slides or go over the top to release the slide. Using the slide lever release to do this is much faster. Especially if you're used to driving other handgun platforms like 1911's.

The only downside is that slide release levers will wear over time and have to be replaced. I've even seen the notch on Glock slides chipped and ruined from using this method.

That said the cost benefit of this method outweighs the added time in performing an emergency reload. Put a timer on it and find out for yourself.

Sturdy, but not the Second Coming (25.11.2012)

This is a good, sturdy part. I have used some of the extended releases and had no problems with them, since I shoot thumbs down usually. On the other hand, I have carried my Glocks before with no slide stop lever at all. It is nice to have the slide lock back on an empty mag, but if you're in an actual gunfight and run the gun dry you will probably discover that by pulling on the trigger again, not by noticing the slide is locked. Shoot high thumbs on a Sig, and you have the same problem. And the slide stop lever doesn't hold the gun together like a 1911, so it's no great loss not have one.

It is quicker to reload with a nice slide release, but if you are shooting with a high thumbs grip you're going to ride the lever and keep the slide from locking open anyway. So why not just eliminate that problem. I did discover on my latest trip to the range that a high thumbs grip kept this lever from doing its job. I did have to bend the spring a little to get more tension on it and make it disengage a little more rapidly. It is extremely easy to disengage and also angled in such a way that you can lock the slide open easily, just in case being able to show people that it's empty is important to you. At the moment, I have one of the small original levers back in there. It's really more of a range thing for me, because I only load a few rounds in my mags at the range to practice reloads as much as possible, and I might as well save the slide from slamming forward empty. (I don't think it's a huge deal on the Glock, though. It's not a 1911.) I'll probably just go back to not even using one. It's just something else to snag on things...

There are no cons to this product that are not also shared by any slide stop lever that is easy to disengage. My philosophy when it comes to pistol controls is as follows: "Thumbs down, no problems. Thumbs up, problems." My primary concern with this part is accidentally locking the slide open when the gun is not yet empty. That is more of a concern to me than riding it and keeping it from locking open on an empty. People who shoot Sigs have been living with that problem forever now. On the other hand, if you're going to ride it and keep it from working, why even have it on there? Just because Larry Vickers has his name on it, that doesn't mean it is perfect. I tried his mag release and went back to the original one, as well.

Top part to add to Glock (19.01.2013)

After I installed this on my Glock, I did a simulated slide release a few times. I CAN FEEL a big difference between the OEM Glock Slide Stop and the Vickers Slide Stop. The slide extends a little more further out than the OEM Glock. You do get a positive grip and feel with your thumbs and I do believe it provides an advantage if you wear gloves. I can't comment on the durability of the slide stop as it will take time from additional range time. The build and construction seems comparable to the OEM Glock, however, you have to keep in mind that the slide stop is not a robust part that is a thin strip of steel. I do recommend using the Vickers Slide Stop and it can help the process of reloading your Glock quicker than the OEM Glock Slide Stop.

World of difference (13.11.2013)

I learned to shoot glocks years back by always manually manipulating the slide after a reload due to the fact that the slide stop was so small it was not very realistic to try to hit it with a thumb. This gives me the option to use my thumb to send the slide forward. Quick instal, perfect fit, no problems. Not too big=wont catch on things. Its literally perfect. These boys know the deal.

SHARP Edges, STILL Recommended (06.04.2014)

Per the review by "Kelly" on 7/28/12, yes, this thing is dang near slice-your-thumb sharp, in the front and in the rear. I even went back to the OEM part because of this... but, while the OEM part isn't sharp (and thus, much less painful on the thumb), it still had the small purchase area that was the reason I bought the Vickers part. So... I got out my set of high-quality needle files and went to work on the Vickers slide stop. After a few minutes of appropriate filing, the new part is WAY better. I touched up the bare metal with some "gun bluing" stuff I have, and the result is perfect.

I installed this part on my new G41 with no muss and no fuss. Because of the very UNPLEASANT sharp edges, I'm only rating this product with four stars -- but I definitely recommend it to anyone looking for a slide stop that offers more purchase area than the slender OEM part. Maybe the sharp edges won't bother you but, if they do, a file and some touch-up bluing will take care of things nicely.

Installing this is fast and simple.

Vickers TSS (18.04.2014)

Never had any issue with sharp edges. Does what its designed to do, the original glock part works alright but this one is way better. If I buy a new glock I'll be buying one of these. The texture is better than the original as is the shape. Only improvement would be these coming stock on all glocks.

Enhanced slide stop by Tangodown (11.10.2015)

I have installed several of these slides stops for guys over the years. I have had many of them return to have the factory one installed due to malfunctions. The spring of this slide stop doesn't keep the tension necessary to hold the slide to the rear on an empty magazine.

Works great but... (21.12.2017)

as others have noted, this think has sharp edges!! Yes, it is an easy fix with a file or sandpaper, and a bluing pen, but the edges really should have been rounded a bit to begin with. Other than that, it works great.

I checked "fitting required" as a Con as that seemed to be more applicable than poor quality.

Excellent. Does Exacty What It Needs To (18.01.2018)

I'm a left handed shooter and often use my left index finger to manipulate the slide release. I found this slide release to be a great addition to my Glock 21. It sticks out enough to get positive contact with your finger but not so far that it catches on anything. It has edges that are a bit sharper than the Glock factory but that is something which is easy to gt used to. It installs very easily (took me about 30 seonds). I will be purchasing 2 more of these to fit to my other Glocks.

Les 14 flere anmeldelser fra brownells.com

549 549 1 NOK

Produktnr.: 100007477
TANGODOWN ENHANCED SLIDE STOP
Produsentnr.: VTSS001 955707100549 Omformet tommelpute plasserer puten litt foran fabrikkposisjonen, slik at tommelen din når den raskere og returnerer pistolen til batteri fortere. Puten er formet for å hjelpe til med positiv kontakt for å forhindre utilsiktet engasjement av sleide stopp, selv når du har på deg hansker. Stanset og formet fra holdbart 4130 stål, deretter behandlet med en spesiell hardcoat-finish som motstår rust og slitasje.

549 NOK 5 kr 549,00 *

Leveringstid ca. 14-21 dager.
5 stk. på lageret i USA

Spesifikasjoner: Finish: Carbon Steel Make: Glock Modell: 21, 17, 17L, 19, 22, 23, 24, 25, 34, 35, 26, 27, 28, 31, 32, 33, 18

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Finish: Carbon Steel Make: Glock Modell: 17,17L,18,19,21,22,23,24,25,26,27,28,31,32,33,34,35 Leveringsvekt: 0,018kg Frakthøyde: 25mm Fraktbredde: 89mm Fraktlengde: 89mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Optimum Shape To Ensure Positive Thumb Contact

Mer...

Optimal form for å sikre positiv kontakt med tommelen

Mer...

Kundevurderinger for TANGODOWN ENHANCED SLIDE STOP

Antall vurderinger: 14
Fra brownells.com: 14
Gjennomsnittsvurdering: 4,3

A definite improvement over OEM (03.06.2011)

Big improvement over stock (07.07.2011)

Makes it much easier to lock slide.

Also makes it easier to release.

Great texture.

Huge improvement over stock (26.12.2011)

Much quicker to activate than the standard or extended OEM slide release.

Must Have Item! (23.02.2012)

So - so (28.07.2012)

Simple solution (13.08.2012)

Sturdy, but not the Second Coming (25.11.2012)

Top part to add to Glock (19.01.2013)

World of difference (13.11.2013)

SHARP Edges, STILL Recommended (06.04.2014)

Vickers TSS (18.04.2014)

Enhanced slide stop by Tangodown (11.10.2015)

Works great but... (21.12.2017)

Excellent. Does Exacty What It Needs To (18.01.2018)

Les 14 flere anmeldelser fra brownells.com

Kunder kjøpte også

TANGODOWN VICKERS TACTICAL EXT MAG RELEASE FOR GLOCK® 20,21,29,30
VICKERS GLOCK® EXTENDED MAGAZINE RELEASE

TANGODOWN

På lager

kr 459,00 * kr 449,00 - kr 499,00*

Magasinutløsere

4,1

ZEV TECHNOLOGIES TRIGGER SPRING, ONLY
TRIGGER UPGRADE COMPONENTS for GLOCK®

ZEV TECHNOLOGIES

På lager

kr 169,00 * kr 159,00 - kr 329,00*

Avtrekksfjærer

3,3

GHOST EXTENDED MAGAZINE RELEASE FOR GEN4
EXTENDED MAGAZINE RELEASE for GEN 4 GLOCK®

GHOST

Kommer til lager

kr 319,00 *

Magasinutløsere

MAGPUL M-LOK RAIL 3 SLOT PICATINNY ALUMINUM BLACK 1.5"
AR-15 PICATINNY M-LOK RAIL ALUMINUM

MAGPUL

På lager

kr 379,00 * kr 379,00 - kr 459,00*

Diverse skinner

BROWNELLS 22 CAL "SPECIAL LINE" DEWEY CENTERFIRE RIFLE BRUSH 3PK
"SPECIAL LINE"™ DEWEY-THREAD BORE BRUSH

BROWNELLS

På lager

kr 219,00 * kr 219,00 - kr 699,00*

Løpsbørster

4,8

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.