Auto-oversatt beskrivelse (Beskrivelse - Produsent): Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Mer...
Universal shell holder used in most brands of reloading presses. Will not work with Lee Auto Prime. View Lee Shellholder Chart
Mer...
Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
Mer...
Kundevurderinger for Lee Universal Shellholder, #19
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 4
Modified for Sinclair priming tool(13.12.2017)
The Sinclair priming tool is in my opinion the best for accurately and consistently seating primers. However, for .338 LM (based on .416 Rigby) there are not a lot of options. The proper Sinclair holder is backordered from Brownell.
However the Sinclair tool accepts Lee hand priming tool shell holders and the #8 Lee shell holder fits and can be installed into the Sinclair tool by facing off the lug that holds the shell holder into a press thus converting it to a Lee priming-type shell holder, in other words just make this holder flat across the bottom as are the Lee priming shell holders. I did this easily in the lathe, a 5 minute job.
You may also need to modify the primer cup in the Sinclair tool to allow a case to fit smoothly. I took .025 off the lip of the cup to match the shell holder floor. The Sinclair plunger is adjustable (see their directions) and it sets primers just below flush when is set to .010 above the lip of the primer cup.
100010076 Lee Universal Shellholder, #19 Produsentnr.: 90004734307900045 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
87NOK5kr 87,00
*
5 på lager
Spesifikasjoner:Cartridge: 9 mm Luger, 380 Auto (ACP), 40 S&WStyle: Press Type
Cartridge:
380 Auto (ACP),9 mm Luger,40 S&W
Style:
Press Type
Elementdetaljer
Made in USA
100010061 Lee Universal Shellholder, #1 Produsentnr.: 90518734307905187 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
101NOK6kr 101,00
*
6 på lager
Spesifikasjoner:Cartridge: 357 Magnum, 38 Special, 38 Short ColtStyle: Press Type
100010062 Lee Universal Shellholder, #2 Produsentnr.: 90519734307905194 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
101NOK35kr 101,00
*
10+ på lager
Spesifikasjoner:Cartridge: 45 Auto (ACP), 25-06 Remington, 7 mm - 08 Remington, 8 mm Mauser (8 x 57 mm Mauser)Style: Press Type
100010063 Lee Universal Shellholder, #3 Produsentnr.: 90520734307905200 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
101NOK19kr 101,00
*
10+ på lager
Spesifikasjoner:Cartridge: 30-30 Winchester, 375 Winchester, 7.65 x 53 mm Mauser, 219 Zipper, 25-35 Winchester, 7-30 Waters, 7.5 mm Schmidt Rubin, 30 Herrett, 32 Winchester Special, 32-40 Winchester, 356 Winchester, 38-55 WinchesterStyle: Press Type
100010064 Lee Universal Shellholder, #4 Produsentnr.: 90521734307905217 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
100010065 Lee Universal Shellholder, #5 Produsentnr.: 90522734307905224 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
101NOK12kr 101,00
*
10+ på lager
Spesifikasjoner:Cartridge: 223 WSSM (Winchester Super Short Mag), 243 WSSM (Winchester Super Short Mag), 270 WSM (Winchester Short Mag), 7 mm Remington Magnum, 257 Weatherby Magnum, 264 Winchester, 6.5 mm Remington Magnum, 270 Weatherby MagnumStyle: Press Type
100010066 Lee Universal Shellholder, #6 Produsentnr.: 90523734307905231 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
100010068 Lee Universal Shellholder, #8 Produsentnr.: 90525734307905255 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
101NOK10kr 101,00
*
10 på lager
Spesifikasjoner:Cartridge: 45-70 Government, 348 Winchester, 416 RigbyStyle: Press Type
100010069 Lee Universal Shellholder, #9 Produsentnr.: 90526734307905262 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
99NOK0kr 99,00
*
Spesialbestilles: Beregn 5-8 ukers behandlingstid
Spesifikasjoner:Cartridge: 41 Remington MagnumStyle: Press Type
100010070 Lee Universal Shellholder, #10 Produsentnr.: 90527734307905279 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
99NOK0kr 99,00
*
Spesialbestilles: Beregn 5-8 ukers behandlingstid
Spesifikasjoner:Cartridge: 220 Swift, 225 Winchester, 6.5 x 50 mm Japanese Arisaka, 7 x 64 mm BrennekeStyle: Press Type
100010071 Lee Universal Shellholder, #11 Produsentnr.: 90528734307905286 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
100010072 Lee Universal Shellholder, #12 Produsentnr.: 90529734307905293 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
99NOK29kr 99,00
*
10+ på lager
Spesifikasjoner:Cartridge: 7.62 x 39 mm Russian, 22 PPC, 6 PPCStyle: Press Type
100010073 Lee Universal Shellholder, #14 Produsentnr.: 90001734307900014 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
85NOK1kr 85,00
*
1 på lager
Spesifikasjoner:Cartridge: 44-40 Winchester, 38-40 WinchesterStyle: Press Type
100010074 Lee Universal Shellholder, #15 Produsentnr.: 90002734307900021 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
85NOK0kr 85,00
*
Spesialbestilles: Beregn 5-8 ukers behandlingstid
Spesifikasjoner:Cartridge: 25 AutoStyle: Press Type
100010075 Lee Universal Shellholder, #16 Produsentnr.: 90003734307900038 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
87NOK14kr 87,00
*
10+ på lager
Spesifikasjoner:Cartridge: 500 S&W, 7.62 x 54 mm Russian, 8 x 56 mm Rimmed HungarianStyle: Press Type
100010077 Lee Universal Shellholder Set Produsentnr.: 90197734307901974 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
100053238 Lee Universal Shellholder, #13 Produsentnr.: 90199734307901998 Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
Universal shell holder used in most brands of reloading presses. Will not work with Lee Auto Prime. View Lee Shellholder Chart
Mer...
Universal skallholder som brukes i de fleste merker av omlastingpresser. Fungerer ikke med Lee Auto Prime. Vis Lee Shellholder Chart
Mer...
Kundevurderinger for Lee Universal Shellholder, #19
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 4
Modified for Sinclair priming tool(13.12.2017)
The Sinclair priming tool is in my opinion the best for accurately and consistently seating primers. However, for .338 LM (based on .416 Rigby) there are not a lot of options. The proper Sinclair holder is backordered from Brownell.
However the Sinclair tool accepts Lee hand priming tool shell holders and the #8 Lee shell holder fits and can be installed into the Sinclair tool by facing off the lug that holds the shell holder into a press thus converting it to a Lee priming-type shell holder, in other words just make this holder flat across the bottom as are the Lee priming shell holders. I did this easily in the lathe, a 5 minute job.
You may also need to modify the primer cup in the Sinclair tool to allow a case to fit smoothly. I took .025 off the lip of the cup to match the shell holder floor. The Sinclair plunger is adjustable (see their directions) and it sets primers just below flush when is set to .010 above the lip of the primer cup.