Found on everything from scope rings and bases, to autos and appliances. T-10 bit fits Brownells Scope Ring Screws.
SPECS: 1" (2.5cm) long. ¼" (6.3mm) shank. Set includes ten bits.
Mer...
Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
SPECS: 1 "(2,5 cm) lang." (6,3 mm) skaft. Sett inkluderer ti biter.
Mer...
Kundevurderinger for T10 TORX Bit
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 1,8
soft duty(21.08.2013)
used mostly for optic mounting, I have found the metal in these bits to be of inferior quality. They are very soft and the "teeth" of the bits have stripped at under 15 inch pounds (with no damage to the screw heads).
Soft Bit Because It Is Supposed To Be(12.08.2017)
I am writing this review while buying another bit because I wore one out. But it is not a bad thing. Being in a hurry, I accidentally used too small of a torx bit on a pair of scope rings. Luckily these bits are made out of soft metal, or else I would have damaged a customer's screws while he was in the store. These bits are designed to fit perfect and are designed soft so they will do no damage to a firearm.
Overall, this is a good product as long as you use it as designed.
Soft Torx bits(03.11.2017)
The bits are of inferior quality. They are of very soft construction, which means they don't mar the gun, but they will twist off at 15 in/lb. and then you have a problem with the torx head inside the screw!
Not the best(28.10.2011)
Ordered these to assist with weapon maintenance at work. Received them in a timely manner and then attempted to put them use. Unfortunately the tools are not strong and two failed (bent/broke) the first time they were used and that was with very little toque being applied. Be careful they don't work; I thought it would be a nice compliment to my magna tip stuff but was sadly mistaken.
Poor quality(16.02.2013)
I ordered these some time back. Tonight, I used the T10 to remove a sight base screw. The bit sheared off at a weird angle leaving part of the bit in the sight base screw. I tried to remove the bit using pliers, however, the bit disintegrated in the grip of the pliers. It appears that this is a powdered metal item. The bit could not be removed from the screw. I ended up cutting a slot in the screw to remove it with a traditional slotted screwdriver. It cost me the sight base. DO NOT BUY!
Poor Product(06.01.2014)
The only reason I give these bits one star is to enter the review. I purchased these bits to address some fairly delicate repairs on clock works. I used the T5 and T6 bits the same day I received them, and neither of them survived the first use. Upon application of the very slightest amount of torque, they turn to powder. I was able to remove a couple of screws, but barely able to replace them. I am still looking for replacements, but the small-sized Torx bits are very hard to find. Nevertheless, Brownell's should not sell inferior tools like these.
080435010 T10 TORX Bit Produsentnr.: Z0T10X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435015 T15 TORX Bit Produsentnr.: Z0T15X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435020 T20 TORX Bit Produsentnr.: Z0T20X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435025 T25 TORX Bit Produsentnr.: Z0T25X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435030 T30 TORX Bit Produsentnr.: Z0T30X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435031 T5 TORX Bit Produsentnr.: Z0T5X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435034 T8 TORX Bit Produsentnr.: Z0T8X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435032 T6 TORX Bit Produsentnr.: Z0T6X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435033 T7 TORX Bit Produsentnr.: Z0T7 Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
080435035 T9 TORX Bit Produsentnr.: Z0T9X Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
Found on everything from scope rings and bases, to autos and appliances. T-10 bit fits Brownells Scope Ring Screws.
SPECS: 1" (2.5cm) long. ¼" (6.3mm) shank. Set includes ten bits.
Mer...
Fant på alt fra omfangsringer og baser, til biler og apparater. T-10 bit passer til Brownells Scope Ring Screws.
SPECS: 1 "(2,5 cm) lang." (6,3 mm) skaft. Sett inkluderer ti biter.
Mer...
Kundevurderinger for T10 TORX Bit
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 1,8
soft duty(21.08.2013)
used mostly for optic mounting, I have found the metal in these bits to be of inferior quality. They are very soft and the "teeth" of the bits have stripped at under 15 inch pounds (with no damage to the screw heads).
Soft Bit Because It Is Supposed To Be(12.08.2017)
I am writing this review while buying another bit because I wore one out. But it is not a bad thing. Being in a hurry, I accidentally used too small of a torx bit on a pair of scope rings. Luckily these bits are made out of soft metal, or else I would have damaged a customer's screws while he was in the store. These bits are designed to fit perfect and are designed soft so they will do no damage to a firearm.
Overall, this is a good product as long as you use it as designed.
Soft Torx bits(03.11.2017)
The bits are of inferior quality. They are of very soft construction, which means they don't mar the gun, but they will twist off at 15 in/lb. and then you have a problem with the torx head inside the screw!
Not the best(28.10.2011)
Ordered these to assist with weapon maintenance at work. Received them in a timely manner and then attempted to put them use. Unfortunately the tools are not strong and two failed (bent/broke) the first time they were used and that was with very little toque being applied. Be careful they don't work; I thought it would be a nice compliment to my magna tip stuff but was sadly mistaken.
Poor quality(16.02.2013)
I ordered these some time back. Tonight, I used the T10 to remove a sight base screw. The bit sheared off at a weird angle leaving part of the bit in the sight base screw. I tried to remove the bit using pliers, however, the bit disintegrated in the grip of the pliers. It appears that this is a powdered metal item. The bit could not be removed from the screw. I ended up cutting a slot in the screw to remove it with a traditional slotted screwdriver. It cost me the sight base. DO NOT BUY!
Poor Product(06.01.2014)
The only reason I give these bits one star is to enter the review. I purchased these bits to address some fairly delicate repairs on clock works. I used the T5 and T6 bits the same day I received them, and neither of them survived the first use. Upon application of the very slightest amount of torque, they turn to powder. I was able to remove a couple of screws, but barely able to replace them. I am still looking for replacements, but the small-sized Torx bits are very hard to find. Nevertheless, Brownell's should not sell inferior tools like these.