Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

JONES RIFLE THROUGH-THE-PAD STOCK ADJUSTER


Auto-oversatt beskrivelse (Beskrivelse - Produsent): Unikt koblingssystem mellom platene gjør at du kan gjøre justeringer uten å fjerne rekylputen fra regulatoren og gir mer presis horisontal, vertikal og diagonal justerbarhet enn standardmodellen. Bor bare to små hull på 5/16 "til 3/8" i puten, slik at du kan sette inn den medfølgende unbrakonøkkelen for å løsne de to sekskantskruene og plassere justereren. Mer...

763000002
Fast, Hassle-Free Stock Adjustments To Match Any Shooting Style
Unique coupling system between the plates allows you to make adjustments without removing the recoil pad from the adjuster and provides more precise horizontal, vertical, and diagonal adjustability than the standard model. Simply drill two small 5/16" to 3/8" diameter holes in the pad, so you can insert the included Allen wrench to loosen the two hex-head screws and reposition the adjuster. Allows 1-7/16" vertical adjustment, 5/16" horizontal offset, and up to 40º left or right tilt.
SPECS: Machined 6061 aluminum, black, anodized finish. 5-11⁄16" (14.5cm) long, 2 (5cm) wide, 13⁄32" (10mm) thick. Fits recoil pads with 3-1⁄8" c-to-c hole spacing. Includes mounting hardware and Allen wrench.
1464 1464 1 NOK
763000002
Through-the-Pad Stock Adjuster Black Aluminum Unikt koblingssystem mellom platene gjør at du kan gjøre justeringer uten å fjerne rekylputen fra regulatoren og gir mer presis horisontal, vertikal og diagonal justerbarhet enn standardmodellen. Bor bare to små hull på 5/16 "til 3/8" i puten, slik at du kan sette inn den medfølgende unbrakonøkkelen for å løsne de to sekskantskruene og plassere justereren. Lar 1-7 / 16 "vertikal justering, 5/16" horisontal forskyvning, og opptil 40º venstre eller høyre vippe.
1464 NOK 0 kr 1 464,00 *

Kan restnoteres
Spesifikasjoner: Finish: Black Make: Universal Rifles Material: Aluminum

Attributes

Finish: Black Make: Universal Rifles Material: Aluminum

Elementdetaljer

Made in USA




Fast, Hassle-Free Stock Adjustments To Match Any Shooting Style
Unique coupling system between the plates allows you to make adjustments without removing the recoil pad from the adjuster and provides more precise horizontal, vertical, and diagonal adjustability than the standard model. Simply drill two small 5/16" to 3/8" diameter holes in the pad, so you can insert the included Allen wrench to loosen the two hex-head screws and reposition the adjuster. Allows 1-7/16" vertical adjustment, 5/16" horizontal offset, and up to 40º left or right tilt.
SPECS: Machined 6061 aluminum, black, anodized finish. 5-11⁄16" (14.5cm) long, 2 (5cm) wide, 13⁄32" (10mm) thick. Fits recoil pads with 3-1⁄8" c-to-c hole spacing. Includes mounting hardware and Allen wrench.