SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® 2.0 adds a multi-function finger ring and robust pocket clip to your tactical flashlight. It mounts securely between the light’s tailcap and body, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. The SwitchBack® 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line. It incorporates new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. FEATURES: SwitchBacks can be used with handguns or long guns. It allows the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. New for SwitchBack 2.0: A finger ring that releases under heavy force/torque but can be reset. A stronger pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wider thumb rest with traction features. Small crush ribs on the SwitchBack 2.0’s lip that create a custom fit across a broader range of lights. An aluminum spacer that expands compatibility to Streamlight HL and HL-X flashlights and other manufacturers with similar designs. Installation For installation, first try installing the SwitchBack on your light without use of the O-ring or aluminum washer. Simply unscrew the tailcap, add the SwitchBack, and rescrew the tailcap back on. If the light does not activate upon use of the tailcap switch with the SwitchBack installed, try installing the aluminum washer as shown in the diagram below. Streamlight models tend to require the aluminum washer, but may not, depending on the tailcap features of the light. Elzetta and Surefire models do not usually require the aluminum washer, but users may find that addition of the rubber O-ring will help to stabilize the position of the SwitchBack
Oppdag den innovative SWITCHBACK 2.0 stor lommelykt ring med lommeklips!
SWITCHBACK 2.0 stor lommelykt ring med lommeklips er den perfekte løsningen for de som ønsker å forbedre bruken av sin taktiske lommelykt. SwitchBack® 2.0 legger til en multifunksjons finger ring og en robust lommeklips, som gir deg en sikker og gjentakbar grepindeks under utplassering fra lommen eller posen.
Produktbeskrivelse
SwitchBack® 2.0 er den neste evolusjonen i den innovative SwitchBack lommelykt ring produktlinjen. Den inkorporerer nye funksjoner og forbedringer basert på tusenvis av timer med bruk av våre fagpersoner og kunder. SwitchBack monteres sikkert mellom tailcap og kroppen av lommelykten din, noe som gjør den trygg uansett støt, fuktighet og temperaturforandringer.
FUNKSJONER:
- Kan brukes med både håndvåpen og langvåpen.
- Lar brukeren pålitelig utplassere og indeksere en lommelykt fra både lommer og poser, ved hjelp av SwitchBacks stive, men frigjørbare, retensjonsring.
- Gir mulighet for å skyte med et naturlig to-hånds grep (SwitchBack-teknikken).
- Bruker alle tradisjonelle lavlys teknikker som Neck Index, Modified FBI og Harries.
- Positivt beholde lyset ved trekk av våpen, omlasting og håndtering av feil.
SwitchBack gir rask utplassering og forbedret retensjon under mange aktiviteter som klatring, backpacking, bil- og hjemvedlikehold, og selvforsvar.
Nyheter for SwitchBack 2.0:
- En finger ring som frigjøres under tung kraft/vridning, men kan resettes.
- En sterkere lommeklips som også fungerer med MOLLE/PALS webbing.
- En lommeklipsposisjon som tillater litt dypere bæring enn SwitchBack® Large (original).
- En tubulær del som er kuttet lavere for å tillate grep på begge sider av tail-cap under installasjon.
- En bredere tommelstøtte med grepfunksjoner.
- Små knusningsribber på SwitchBack 2.0s leppe som skaper en tilpasset passform over et bredere spekter av lys.
- En aluminiumsdistanse som utvider kompatibiliteten til Streamlight HL og HL-X lommelykter samt andre produsenter med lignende design.
Installasjon
For installasjon, prøv først å installere SwitchBack på lyset ditt uten bruk av O-ringen eller aluminiumsdistanse. Skru bare av tailcap, legg til SwitchBack, og skru tailcap tilbake på. Hvis lyset ikke aktiveres ved bruk av tailcap-bryteren med SwitchBack installert, prøv å installere aluminiumsdistanse som vist i diagrammet nedenfor. Streamlight-modeller har en tendens til å kreve aluminiumsdistanse, men det kan variere avhengig av tailcap-funksjonene til lyset. Elzetta og Surefire-modeller krever vanligvis ikke aluminiumsdistanse, men brukere kan finne at tillegg av gumm O-ring vil bidra til å stabilisere posisjonen til SwitchBack.