HENRY SPD HUSH SERIES 45 COLT LEVER ACTION RIFLE The Henry SPD HUSH Series is a bold evolution in lever-action rifle design, purpose-built to be run suppressed. Developed by the Henry Special Products Division—this new R&D initiative focused on forward-thinking innovation—this inaugural release reimagines what a lever gun can be in modern hunting and shooting applications. The HUSH Series strikes the perfect balance of traditional feel and modern performance. Designed To Be Silenced Lever actions already offer excellent balance and speed, with the added suppressor-friendly benefit of a closed action during firing. Henry’s HUSH Series takes this a step further. Every component forward of the receiver is optimized to minimize weight, keeping the rifle’s natural center of gravity intact—even when a suppressor is mounted. The result is a no-compromise suppressor host that retains the instinctive handling and quick follow-up shot capability that lever guns are known for. Match-Grade Carbon Fiber Barrel At the heart of the HUSH Series is a match-grade 416R stainless steel barrel, wrapped in a tension-loaded roll of carbon fiber, supplied by way of a collaborative partnership with BSF Barrels of Delavan, Wisconsin. This design creates a 95% air gap between the carbon and steel, reducing weight, promoting faster cooling, and ensuring temperature stability. As the steel heats and expands, the carbon sleeve expands with it—preventing delamination and maintaining accuracy during long shooting sessions. Adaptable. Balanced. Purposeful. The forearm is a skeletonized aluminum design, created in collaboration with TAPCO, The American Parts Company. Its slim profile, light weight, and M-LOK® compatibility allow for quick attachment of hunting or shooting accessories without adding bulk. A forged carbon fiber Picatinny rail atop the receiver gives you the freedom to mount your preferred optic, while a threaded muzzle makes it ready for your suppressor of choice. See specifications listed below for caliber-specific thread patterns. The matte dark gray American hardwood laminate buttstock conceals more than meets the eye. It’s hollowed out just enough to remove some weight while retaining exceptional durability, and the checkering and rubber recoil pad provide increased purchase and comfort. Opting for the laminate buttstock ensures the familiar wood-to-skin touch that’s missing from full aluminum builds. Additional visual and functional enhancements—like a matte-finished outer magazine tube, lever, and trigger—round out the series with thoughtful finishing touches. After all, we have to make it look good too. A Smarter Way to Hunt By shooting suppressed, you reduce felt recoil, protect your hearing, and lessen disruption to surrounding game. It’s a smarter, safer, and more ethical way to hunt—and now there’s a rifle built specifically for it. Made in America, Or Not Made At All The SPD HUSH Series is the debut release from Henry’s Special Products Division and represents our commitment to innovation without compromise. Each one is built and fine-tuned in Rice Lake, Wisconsin, backed by a Lifetime Warranty, and comes with our 100% Satisfaction Guarantee. FEATURES: Match-grade 416R stainless steel barrel encased in a tension-wrapped carbon fiber sleeve, manufactured in partnership with BSF Barrels of Delavan, Wisconsin Lightweight, skeletonized aluminum forearm featuring M-LOK® accessory slots, designed in collaboration with TAPCO, The American Parts Company A checkered, lightweight, matte dark gray American hardwood laminate stock with a rubber recoil pad. Receiver-mounted forged carbon fiber Picatinny rail for optics mounting Threaded muzzle for suppressor use Matte-finished magazine tube, lever, and trigger components for a refined aesthetic SPECIFICATIONS: Caliber: 45 Colt Barrel Length: 16.5" Barrel Type: Round Carbon Fiber Tension-Wrapped 416R Stainless Steel Rate of Twist: 1:16 Overall Length: 34.29" Weight: 6.4 lbs. Receiver Finish: Blued Steel Rear Sight: None Front Sight: None Scopeability: Drilled and Tapped Scope Mount Type: BB-RSM Stock Material: American Hardwood Laminate Buttplate/Pad: Ventilated Rubber Recoil Pad Length of Pull: 14" Safety: Transfer Bar Best Uses: Target/Hunting Embellishments/Extras: TAPCO Aluminum Forearm with M-LOK®, Forged Carbon Fiber Receiver-Mounted Picatinny Rail, 5/8x24 Threaded Barrel, Sling Swivel Studs.
En ny æra innen lever-action rifler!
HENRY SPD HUSH SERIES 45 COLT LEVER ACTION RIFLE er et dristig skritt i utviklingen av lever-action rifler, designet for å bli brukt med demper. Utviklet av Henrys Special Products Division, fokuserer dette nye initiativet på innovasjon og reimaginerer hva en lever-rifle kan være i moderne jakt- og skyteapplikasjoner.
Designet for å bli dempet
Lever-action rifler tilbyr allerede utmerket balanse og hastighet, med fordelen av en lukket mekanisme under avfyring. Henrys HUSH Series tar dette et skritt videre. Hver komponent foran mottakeren er optimalisert for å minimere vekt, og opprettholder rifleens naturlige tyngdepunkt selv med en demper montert. Resultatet er en kompromissløs dempervert som beholder den instinktive håndteringen og raske oppfølgingsskuddet som lever-rifler er kjent for.
Match-grade karbonfiberløp
Hjertet i HUSH Series er et match-grade 416R rustfritt stål-løp, innpakket i et spenningsbelastet karbonfiberlag, levert i samarbeid med BSF Barrels fra Delavan, Wisconsin. Dette designet skaper en 95% luftspalte mellom karbonet og stålet, noe som reduserer vekt, fremmer raskere avkjøling og sikrer temperaturstabilitet.
Tilpassbar. Balansert. Formålstjenlig.
Forhåndsdelene har et skelettdesign i aluminium, laget i samarbeid med TAPCO, The American Parts Company. Den slanke profilen, lave vekten og M-LOK® kompatibiliteten gjør det enkelt å feste jakt- eller skyteutstyr uten å tilføre bulk. En smidd karbonfiber Picatinny-skinne på mottakeren gir deg frihet til å montere ønsket optikk, mens en gjengestuss gjør den klar for din valgte demper.
En smartere måte å jakte på
Ved å skyte med demper reduserer du følt rekyl, beskytter hørselen din og reduserer forstyrrelsen av omgivende vilt. Det er en smartere, tryggere og mer etisk måte å jakte på – og nå finnes det en rifle bygget spesifikt for dette.
Produsert i Amerika, eller ikke laget i det hele tatt
SPD HUSH Series er debututgivelsen fra Henrys Special Products Division og representerer vårt engasjement for innovasjon uten kompromiss. Hver rifle er bygget og finjustert i Rice Lake, Wisconsin, støttet av en livstidsgaranti og kommer med vår 100% tilfredshetsgaranti.
FUNKSJONER:
- Match-grade 416R rustfritt stål-løp innkapslet i et spenningsbelastet karbonfiberlag, produsert i samarbeid med BSF Barrels fra Delavan, Wisconsin
- Lett, skelettdesign i aluminium med M-LOK® tilbehørsplasser, designet i samarbeid med TAPCO, The American Parts Company
- En sjekket, lett, matt mørk grå amerikansk hardwood laminerte kolbe med gummirekylpad
- Smidd karbonfiber Picatinny-skinne for optikkmontering
- Gjengestuss for demperbruk
- Matt-finish magasinrør, spak og avtrekkerelementer for en raffinert estetikk
SPESIFIKASJONER:
- Kaliber: 45 Colt
- Løpslengde: 16.5"
- Løpstype: Rund karbonfiber spenningsbelastet 416R rustfritt stål
- Rettning av vridning: 1:16
- Totallengde: 34.29"
- Vekt: 6.4 lbs.
- Mottakerfinish: Blåst stål
- Baksikte: Ingen
- Forside: Ingen
- Scopeability: Boret og tappet
- Scope monterings type: BB-RSM
- Kolbemateriale: Amerikansk hardwood laminate
- Kolbeplate/Pad: Ventilert gummirekylpad
- Pull lengde: 14"
- Sikkerhet: Overføringsbar
- Beste bruksområder: Mål/jakt
- Utsmykninger/ekstrautstyr: TAPCO aluminium forarm med M-LOK®, smidd karbonfiber mottaker-montert Picatinny-skinne, 5/8x24 gjengestert løp, slyngefeste.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning