HENRY SPD HUSH SERIES 45-70 GOVERNMENT LEVER ACTION RIFLE The Henry SPD HUSH Series is a bold evolution in lever-action rifle design, purpose-built to be run suppressed. Developed by the Henry Special Products Division—this new R&D initiative focused on forward-thinking innovation—this inaugural release reimagines what a lever gun can be in modern hunting and shooting applications. The HUSH Series strikes the perfect balance of traditional feel and modern performance Designed To Be Silenced Lever actions already offer excellent balance and speed, with the added suppressor-friendly benefit of a closed action during firing. Henry’s HUSH Series takes this a step further. Every component forward of the receiver is optimized to minimize weight, keeping the rifle’s natural center of gravity intact—even when a suppressor is mounted. The result is a no-compromise suppressor host that retains the instinctive handling and quick follow-up shot capability that lever guns are known for. Match-Grade Carbon Fiber Barrel At the heart of the HUSH Series is a match-grade 416R stainless steel barrel, wrapped in a tension-loaded roll of carbon fiber, supplied by way of a collaborative partnership with BSF Barrels of Delavan, Wisconsin. This design creates a 95% air gap between the carbon and steel, reducing weight, promoting faster cooling, and ensuring temperature stability. As the steel heats and expands, the carbon sleeve expands with it—preventing delamination and maintaining accuracy during long shooting sessions. Adaptable. Balanced. Purposeful. The forearm is a skeletonized aluminum design, created in collaboration with TAPCO, The American Parts Company. Its slim profile, light weight, and M-LOK® compatibility allow for quick attachment of hunting or shooting accessories without adding bulk. A forged carbon fiber Picatinny rail atop the receiver gives you the freedom to mount your preferred optic, while a threaded muzzle makes it ready for your suppressor of choice. See specifications listed below for caliber-specific thread patterns. The matte dark gray American hardwood laminate buttstock conceals more than meets the eye. It’s hollowed out just enough to remove some weight while retaining exceptional durability, and the checkering and rubber recoil pad provide increased purchase and comfort. Opting for the laminate buttstock ensures the familiar wood-to-skin touch that’s missing from full aluminum builds. Additional visual and functional enhancements—like a matte-finished outer magazine tube, lever, and trigger—round out the series with thoughtful finishing touches. After all, we have to make it look good too. A Smarter Way to Hunt By shooting suppressed, you reduce felt recoil, protect your hearing, and lessen disruption to surrounding game. It’s a smarter, safer, and more ethical way to hunt—and now there’s a rifle built specifically for it. Made in America, Or Not Made At All The SPD HUSH Series is the debut release from Henry’s Special Products Division and represents our commitment to innovation without compromise. Each one is built and fine-tuned in Rice Lake, Wisconsin, backed by a Lifetime Warranty, and comes with our 100% Satisfaction Guarantee. FEATURES: Match-grade 416R stainless steel barrel encased in a tension-wrapped carbon fiber sleeve, manufactured in partnership with BSF Barrels of Delavan, Wisconsin Lightweight, skeletonized aluminum forearm featuring M-LOK® accessory slots, designed in collaboration with TAPCO, The American Parts Company A checkered, lightweight, matte dark gray American hardwood laminate stock with a rubber recoil pad. Receiver-mounted forged carbon fiber Picatinny rail for optics mounting Threaded muzzle for suppressor use Matte-finished magazine tube, lever, and trigger components for a refined aesthetic SPECIFICATIONS: Caliber: 45-70 Government Barrel Length: 16.5" Barrel Type: Round Carbon Fiber Tension-Wrapped 416R Stainless Steel Rate of Twist: 1:22 Overall Length: 35.25" Weight: 6.7 lbs. Receiver Finish: Blued Steel Rear Sight: None Front Sight: None Scopeability: Drilled and Tapped Scope Mount Type: Weaver 63B Stock Material: American Hardwood Laminate Buttplate/Pad: Ventilated Rubber Recoil Pad Length of Pull: 14" Safety: Transfer Bar Best Uses: Target/Hunting Embellishments/Extras: TAPCO Aluminum Forearm with M-LOK®, Forged Carbon Fiber Receiver-Mounted Picatinny Rail, 5/8x24 Threaded Barrel, Sling Swivel Studs.
Oppdag den banebrytende HENRY SPD HUSH SERIES 45-70 GOVERNMENT levringsrifle!
HENRY SPD HUSH SERIES 45-70 GOVERNMENT LEVER ACTION RIFLE er en dristig utvikling innen design av levringsrifler, spesielt laget for å kunne brukes med lyddemper. Utviklet av Henrys spesielle produktavdeling, fokuserer denne nye forsknings- og utviklingsinitiativet på fremtidsrettet innovasjon. Denne første utgivelsen omdefinerer hva en levringsrifle kan være i moderne jakt- og skyteapplikasjoner.
Designet for å være stillegående
Levringsrifler tilbyr allerede utmerket balanse og hastighet, med den ekstra fordelen av en lukket mekanisme under avfyring. Henrys HUSH-serie tar dette et steg videre. Hver komponent foran mottakeren er optimalisert for å minimere vekt, og opprettholde rifleens naturlige tyngdepunkt selv med en montert lyddemper.
Match-grade karbonfiberløp
I hjertet av HUSH-serien finner vi et match-grade 416R rustfritt stål-løp, omsluttet av et spenningsbelastet lag av karbonfiber, levert gjennom et samarbeid med BSF Barrels i Delavan, Wisconsin. Dette designet skaper et 95% luftgap mellom karbonet og stålet, noe som reduserer vekten, fremmer raskere kjøling og sikrer temperaturstabilitet.
Tilpassbar. Balansert. Formålstjenlig.
Forhåndsdelene er laget i et skeletonisert aluminiumsdesign i samarbeid med TAPCO, The American Parts Company. Den slanke profilen, lave vekten og M-LOK®-kompatibiliteten muliggjør rask montering av jakt- eller skyteutstyr uten å tilføre bulk. En smidd karbonfiber Picatinny-skinne på toppen av mottakeren gir deg friheten til å montere ønsket optikk, mens en gjengestuss gjør den klar for din valgte lyddemper.
En smartere måte å jakte på
Ved å skyte med lyddemper reduserer du opplevd rekyl, beskytter hørselen din, og reduserer forstyrrelser for det omkringliggende dyrelivet. Det er en smartere, tryggere og mer etisk måte å jakte på—og nå finnes det en rifle bygget spesielt for dette.
Lagert i Amerika, eller ikke laget i det hele tatt
SPD HUSH-serien er debututgivelsen fra Henrys spesielle produktavdeling og representerer vårt engasjement for innovasjon uten kompromiss. Hver rifle er bygget og finjustert i Rice Lake, Wisconsin, støttet av en livstidsgaranti, og leveres med vår 100% tilfredshetsgaranti.
FUNKSJONER:
- Match-grade 416R rustfritt stål-løp innkapslet i et spenningsbelastet karbonfiberlag, produsert i samarbeid med BSF Barrels i Delavan, Wisconsin
- Lett, skeletonisert aluminiumsforhånd med M-LOK®-tilbehørsslots, designet i samarbeid med TAPCO, The American Parts Company
- En sjekket, lett, matt mørk grå amerikansk hardwood laminate stokke med gummirekylpute.
- Mottaker-montert smidd karbonfiber Picatinny-skinne for optikkmontering
- Gjengestuss for lyddemperbruk
- Matt-finish magasinrør, spak og avtrekkermekanismer for en raffinert estetikk
SPESIFIKASJONER:
- Kaliber: 45-70 Government
- Løpslengde: 16.5"
- Løpstype: Rund karbonfiber spenningsbelastet 416R rustfritt stål
- Tvist: 1:22
- Totallengde: 35.25"
- Vekt: 6.7 lbs.
- Mottakerfinish: Blåst stål
- Baksikte: Ingen
- Forside: Ingen
- Scopeability: Borret og tappet
- Scope-montasje type: Weaver 63B
- Stokkemateriale: Amerikansk hardwood laminate
- Bakplate/pute: Ventilert gummirekylpute
- Pull Lengde: 14"
- Sikkerhet: Overføringsstang
- Beste bruksområder: Mål/Jakt
- Utsmykninger/ekstra: TAPCO aluminum forhånd med M-LOK®, smidd karbonfiber mottaker-montert Picatinny-skinne, 5/8x24 gjengestøtt løp, slynge svivelstuds.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning