Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
SIG SAUER P220 10MM HUNTER VORTEX RAZOR SIGHT MOUNT

841370117055 296000558
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
899 899 1 NOK
Produktnr.: 296000558
EGW SIG SAUER P220 10MM HUNTER VORTEX RAZOR SIGHT MOUNT
Produsentnr.: 49463 841370117055 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Total lengde: 1.831" Total bredde: 1.062" Monteringstilbehør: (2) 8-32 knappehodeskruer, (1) 8-32 sett skrue) Rødpunktsikte tilpasning: Vortex Razor, C-More RTS & STS Bare fjern baksiktet på våpenet ditt og erstatt det med vår montering for å kunne montere ditt Vortex Razor, C-More RTS eller STS rødpunktsikte. Ingen endringer er nødvendige. Du kan når som helst ta av vår montering og sette tilbake ditt baksikte. Monteringstilbehør inkludert. Monteringsinstruksjoner Fjern baksiktet* Installer EGW Siktemontering i svalehalen Stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Siktemontering (å legge en liten bit papir mellom rødpunktsiktet og siktemonteringen vil gjøre det enklere å fjerne og vil holde Loctite unna rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Dra monteringsskruene til med et dreiemoment på 15in/lbs
899 NOK 1 kr 899,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Farge: Black Make: Sig Sauer Material: Aluminum Modell: P220 Number of Bases: 1-Piece Style: Tactical

Attributes

Farge: Black Make: Sig Sauer Material: Aluminum Modell: P220 Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,034kg Frakthøyde: 25mm Fraktbredde: 89mm Fraktlengde: 140mm

Elementdetaljer

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Nyhetsbrev