Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

Borchardt Rifle
RUGER® BLACKHAWK® EJECTOR ROD HOUSING

850200200

Replaces The Factory Aluminum Part

Made from durable, machined steel that wears longer and functions smoother than the factory aluminum part. Increased weight helps cut down muzzle flip. High-lustre blue finish adds a touch of class to your Ruger® Blackhawk® revolver.

SPECS: Steel, high-lustre blued. 4" (10cm) long, ¼" (6.3mm) wide. Fits Blackhawk w/7½", 5½" and 4-5/8" barrels. Older guns, with silver brazed studs, use the ¼" model. New guns use .200" model.

Mer...

Erstatter fabrikkens aluminiumdel

Laget av slitesterkt, bearbeidet stål som slites lenger og fungerer jevnere enn fabrikken i aluminium. Økt vekt hjelper til med å kutte ned snuten. Blå finish med høy glans gir et snev av klasse til din Ruger® Blackhawk®-revolver.

SPECIFIKASJONER: Stål, høyglansblånet. 4" (10 cm) lang, " (6,3 mm) bred. Passer til Blackhawk m/7", 5" og 4-5/8" løp. Eldre våpen, med sølvloddede pigger, bruker modellen ". Nye våpen bruker .200" modell.

Mer...

Kundevurderinger for Borchardt Rifle EJECTOR ROD HOUSING,.200"

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 2,7

Does not fit (24.01.2010)

This unit did not fit any Ruger single action that I tried it on. If it would fit and lay flush against the barrel as it should, the screw that holds this replacement unit to the barrel would not be long enough to engage the threaded portion in the barrel. The housing hole was not machined deep enough to let the ERH screw protrude far enough to reach the threads in the drilled hole in the barrel. Also, the finish of this product is inferior to Ruger's replacement part with only polished blue on the outer most side of the housing. I give this product a zero.

Worked well for me (07.05.2010)

Finish matched the Ruger very well. The fit could have been a little better, but over-all was easy
enough to deal with.

poorly made product (03.08.2011)

I had to order two of these. I ruined one trying to modify it enough to work. The interior hole is supposed to be counter sunk. It is NOT or at least not done deep or wide enough. Have to put too much pressure on the unit to get it to sit flush with the barrel. Requires taking metal off the base to get it to seat in the frame of the gun properly. I would NOT recommend this poorly made product.

Finish okay, fit poor (20.11.2011)

The housing would not sit flush with the barrel when installed. I had to file quite a bit on the lip that fits into the frame until the housing was mostly flush. Now it has some play in it after I screwed it in. The housing will work, but am fairly disappointed with it.

Great Finish seems to be well built. (28.01.2012)

I ordered this product for my Ruger Blackhawk .357. I had some hesitation before ordering because the description did not list the 6.5" barrel length. I took a chance and what do you know it works great. Overall I am happy with the product, it does not fit absolutely perfect but hey it is just an ejector housing. It looks great and performs as it should. I am happy with the purchase and would buy this product again.

excellent fit and finish (07.08.2013)

This is the second one purchased. This one was an even better fit and finish than the first. Matched perfectly to the Vaquero.

Terrible fit (08.01.2015)

This product when installed had almost a 1/8" gap at the rear where it was miss machined/ground. It was blued nicely but that makes little difference if it doesn't fit right. Brownells, whom is great about these things, refunded my money.

Perfect fit! (23.04.2016)

I noticed other more negative reviews on this item and I was a bit hesitant when ordering. I was surprised at how tight and perfectly it fit my gun with problem whatsoever. It looks great and has a more balanced feel. New model Blackhawk with 4 5/8" bbl.

Thanks

Incomplete thought (09.08.2018)

Sizing was appropriate in that it fit on gun. However, milling was not complete in that there was flashing of metal that would have needed to be filed off if I kept it. This housing essentially has 4 sided with 3 visible when on gun. Only one side is finished. It isn't about reducing glare to remove a shooting distraction. It simply looks unfinished because it is unfinished. Brownells needs to drop this product.

Les 9 flere anmeldelser fra brownells.com

549 549 2 NOK

Produktnr.: 850200200
Borchardt Rifle EJECTOR ROD HOUSING,.200"
Produsentnr.: NONE Laget av slitesterkt, bearbeidet stål som slites lenger og fungerer jevnere enn fabrikken i aluminium. Økt vekt hjelper til med å kutte ned snuten. Blå finish med høy glans gir et snev av klasse til din Ruger® Blackhawk®-revolver.

549 NOK 4 kr 549,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Make: Ruger Modell: Blackhawk

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Ruger Modell: Blackhawk Leveringsvekt: 0,05kg Høyde: 10mm Bredde: 53mm Lengde: 130mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 850200250
Borchardt Rifle EJECTOR ROD HOUSING,1/4" Laget av slitesterkt, bearbeidet stål som slites lenger og fungerer jevnere enn fabrikken i aluminium. Økt vekt hjelper til med å kutte ned snuten. Blå finish med høy glans gir et snev av klasse til din Ruger® Blackhawk®-revolver.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Ruger Modell: Blackhawk

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Ruger Modell: Blackhawk Leveringsvekt: 0,045kg Høyde: 5mm Bredde: 38mm Lengde: 119mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Replaces The Factory Aluminum Part

SPECS: Steel, high-lustre blued. 4" (10cm) long, ¼" (6.3mm) wide. Fits Blackhawk w/7½", 5½" and 4-5/8" barrels. Older guns, with silver brazed studs, use the ¼" model. New guns use .200" model.

Mer...

Erstatter fabrikkens aluminiumdel

Mer...

Kundevurderinger for Borchardt Rifle EJECTOR ROD HOUSING,.200"

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 2,7

Does not fit (24.01.2010)

Worked well for me (07.05.2010)

Finish matched the Ruger very well. The fit could have been a little better, but over-all was easy
enough to deal with.

poorly made product (03.08.2011)

Finish okay, fit poor (20.11.2011)

Great Finish seems to be well built. (28.01.2012)

excellent fit and finish (07.08.2013)

This is the second one purchased. This one was an even better fit and finish than the first. Matched perfectly to the Vaquero.

Terrible fit (08.01.2015)

Perfect fit! (23.04.2016)

Incomplete thought (09.08.2018)

Les 9 flere anmeldelser fra brownells.com

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.