Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

VOLQUARTSEN
REMINGTON 870/1100 EXACT EDGE EXTRACTOR

810162013929 930000144

The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact. The extractor features a very precise hook point. It is hardened to a RC 58-60 to withstand years of use and still maintain its edge. We are able to hold the tolerances to +/-.0001" by utilizing the EDM manufacturing process. Replaces Remington part #16176 and fits 870, 12, 20 and 1100, 12, 20.

SPECS: For Remington 870 and 1100 models.

Mer...

Exact Edge Extractor er produsert gjennom en EDM-prosess for å oppnå nøyaktige toleranser. Den nye extractoren vil ikke miste sin skarphet under påvirkning. Extractoren har et svært presist krokpunkt. Den er herdet til en RC 58-60 for å tåle års bruk og fortsatt bevare sin skarphet. Vi er i stand til å holde toleransene til +/-0.0001" ved å bruke EDM-produksjonsprosessen. Erstatter Remington-delen #16176 og passer til 870, 12, 20 og 1100, 12, 20.

SPECS: For Remington 870 og 1100 modeller.

Mer...

Kundevurderinger for VOLQUARTSEN REMINGTON 870/1100 EXACT EDGE EXTRACTOR

Antall vurderinger: 9
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,2

Does not work with my 80's Wingmaster (26.10.2021)

The extractor is angled in such a way that it hits the barrel, and thus my bolt will not lock up into battery with this volquartsen extractor. Had to go back to my original. Note, yes I've installed it correctly.

no better then remingtons (20.07.2016)

I bought these under the impression they would fit without any gun smithing wrong! save the money and get the remington extractor

Very nice, precision-made item (29.07.2016)

The Volquartsen Exact-Edge is a super replacement part. The fit is precise enough and the installation went fairly easy outside of the part where the locking pin and spring flew across the room.... despite my efforts to prevent that. Anyway, having recovered my truant parts, it went back together with no fuss. Full disclosure.... I haven't been to the range with it yet, but so far the function has been flawless. Much. much better than the chipped, worn extractor it replaced. In fact, I decided to replace the original, Remington MiM extractor on another 870P I'm customizing, with an Exact-Edge too.

Replaced original (19.01.2017)

I bought this to replace the original extractor on my 870 express made in 1988. The original was rounded off and didn't extract reliably. I replaced spring at same time. Install was easy, no modifications needed. Simple, quick, easy push in replacement.

Better than the original (04.12.2017)

Replaced the old original extractor and spring that was well worn and rounded. Was a fast and simple job. Havenât had a problem with the new one.

Amazing! (19.12.2017)

This product is amazing. it was shocking how poor the quality of the factory extractor was compared to this piece. Very easy to install, i did it without removing the bolt. Works perfectly. For a cheap, quality piece of mind upgrade, this thing is perfect.

<img width="500" src='/userdocs/reviewimages/342d3a8e-9498-48f6-99e4-6248b13ab531.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/a1989df3-cc22-4e3a-a807-e2ebab7e42ab.jpg' alt=''>

For More Positive Extractions (25.12.2017)

I used this product to replace my factory MIM extractor that came from the factory on my Express model. I had noticed that on certain brands of cheap ammo, the extractor once and a rare while missed the edge of the shell and continue rearward, leaving the shell partially extracted. Unloading a gun and taking the barrel off on the range to fix a jam is a headache, and embarrassing, to say the least.

I decided to go with this product instead of the Remington because of the stellar reviews. For a few buck more, why not?

Install is ridiculously simple, especially if you have a smaller flat head screwdriver. By depressing the plunger, you can swap out extractors in seconds. The replacement seems longer to me than the MIM part, and the hook is definitely sharper and more pronounced. Plus, it fit the gun seamlessly, so no polishing was necessary.

After installing this and polishing the chamber, extraction is much more positive. The new extractor seems to latch onto the shell more firmly, even with the cheapest birdshot ammunition. About 200 rounds later, the problem seems permanently fixed.

Quality Product; Fixes Common Issues (07.01.2018)

I bought an 18.5" Remington 870 Tactical a week ago and I started dry cycling it and noticed that the factory extractor's blunt nose started hitting the bottom of the ramp it's meant to slide up into in the barrel's perimeter. The issue was that the extractor was meeting the ramp at too low a position. It started making a notch at the base of the ramp. Not too happy about that. It's a brand new shotgun which I have yet to fire. I'm under the impression that any gun should be able to dry cycle many times without killing itself.

I was very happy to see that there was a quality alternative extractor, and the "exact edge" design is just what I needed, as it eliminates the dull face that the other one had and so it just slides right up the ramp when the bolt meets the barrel.

It's possible that the factory extractor would have done the job if I had rounds to cycle, as it may have pushed the extractor up a tad so it hit the ramp at the right spot, but I didn't like that the gun had a weakness even when dry cycling. I've also heard of the issue of rounds not being extracted properly, and that this does the job for that as well, so win-win. Sucks I had to fix a brand new gun, but I guess it's a lot like when software is released and they have day 1 patches.

This is a must-have for reliability-sake.

Great upgrade (17.05.2018)

Super easy to replace the original extractor with this upgrade. Made much better than the factory 870 extractor and reliable. I have had several thousand rounds through my 870 express supermag with this new extractor and it has preformed flawlessly.

Les 8 flere anmeldelser fra brownells.com

649 649 1 NOK

Produktnr.: 930000144
VOLQUARTSEN REMINGTON 870/1100 EXACT EDGE EXTRACTOR
Produsentnr.: VCREM 810162013929 Exact Edge Extractor er produsert gjennom en EDM-prosess for å oppnå nøyaktige toleranser. Den nye extractoren vil ikke miste sin skarphet under påvirkning. Extractoren har et svært presist krokpunkt. Den er herdet til en RC 58-60 for å tåle års bruk og fortsatt bevare sin skarphet. Vi er i stand til å holde toleransene til +/-0.0001" ved å bruke EDM-produksjonsprosessen. Erstatter Remington-delen #16176 og passer til 870, 12, 20 og 1100, 12, 20.

649 NOK 267 kr 649,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: Remington Modell: 1100, 870

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Remington Modell: 1100,870 Leveringsvekt: 0,011kg Frakthøyde: 51mm Fraktbredde: 127mm Fraktlengde: 178mm

Elementdetaljer

Made in USA

SPECS: For Remington 870 and 1100 models.

Mer...

SPECS: For Remington 870 og 1100 modeller.

Mer...

Kundevurderinger for VOLQUARTSEN REMINGTON 870/1100 EXACT EDGE EXTRACTOR

Antall vurderinger: 9
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,2

Does not work with my 80's Wingmaster (26.10.2021)

no better then remingtons (20.07.2016)

I bought these under the impression they would fit without any gun smithing wrong! save the money and get the remington extractor

Very nice, precision-made item (29.07.2016)

Replaced original (19.01.2017)

Better than the original (04.12.2017)

Replaced the old original extractor and spring that was well worn and rounded. Was a fast and simple job. Havenât had a problem with the new one.

Amazing! (19.12.2017)

For More Positive Extractions (25.12.2017)

Quality Product; Fixes Common Issues (07.01.2018)

Great upgrade (17.05.2018)

Les 8 flere anmeldelser fra brownells.com

Kunder kjøpte også

CARLSONS REM-CHOKE 12GA EXTRA FULL REMINGTON SS
12GAUGE REM-CHOKE CHOKE TUBES

CARLSONS

På lager

kr 399,00 *

Choker

SCATTERGUN TECHNOLOGY JUMBO HEAD SAFETY
TACTICAL RESPONSE® JUMBO HEAD SAFETY

SCATTERGUN TECHNOLOGY

På lager

kr 399,00 *

Sikringer

4,1

BROWNELLS REMINGTON 870/1100/1187 12 GAUGE FOLLOWER SS NATURAL
REMINGTON 870/1100/1187 12GAUGE SHOTGUN FOLLOWERS

BROWNELLS

På lager

kr 359,00 * kr 349,00 - kr 379,00*

MAGPUL REM 870 MOE M-LOK FOREND, BLK
REMINGTON 870 MOE M-LOK FORENDS

MAGPUL

På lager

kr 749,00 *

Fortre

3,7

MAGPUL 870 SGA BUTTSTOCK,, ORANGE
SHOTGUN SGA BUTTSTOCKS

MAGPUL

På lager

kr 2 049,00 *

Stokker

4,9

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.

Priser inkl. mva. pluss levering

Klassisk visning

Mobilvisning