Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 2500

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

GENTRY CUSTOM
REMINGTON 700 THREE-POSITION SAFETY SHROUD

339000001

Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles

All-machined steel shroud and lever upgrades the Remington 700 action to a three-position safety. Lets you use match grade triggers that lack a safety. Provides bolt locked, bolt open and fire positions with positive detents. No tools needed to field strip for cleaning, service. Available polished blued. Requires gunsmith installation.

SPECS: Safety - 4140 steel, polished blue (PB). Approx. 2" (5cm) OAL, 2.5 oz. (71g) wt. Fits Remington 700/7/721/722/600/660/XP-100. Right- (RH).

Mer...

Side Swing-stil for å oppgradere fabrikkvåpen eller bygge tilpassede rifler

All-machinert ståldeksel og spake oppgraderer Remington 700-mekanismen til en tresifret sikkerhet. Lar deg bruke match grade avtrekkere som mangler en sikkerhet. Gir låst sluttstykke, åpent sluttstykke og ildposisjoner med positive detenter. Ingen verktøy nødvendig for å feltstrippe for rengjøring, service. Tilgjengelig polert blått. Krever installasjon av børsemaker.

SPECS: Sikkerhet - 4140 stål, polert blått (PB). Omtrentlig 2" (5cm) OAL, 2.5 oz. (71g) vekt. Passer til Remington 700/7/721/722/600/660/XP-100. Høyre- (RH).

Mer...

Kundevurderinger for GENTRY CUSTOM RIGHT HAND BLUE SAFETY ONLY

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 3,4

Last resort (16.11.2009)

I spent many days trying to get this product to work. I also "lost my shirt" with the labor charged to the customer for fitting this part.
The safety lever retainer is a very small socket head screw and the threads of this screw will wear with minimal usage of engaging and disengaging the safety, and then the safety becomes very difficult to engage.

Very good product, true safety (18.02.2011)

I have installed half a dozen of these on Remington 700's and Mauser 98's. It is only a job for the experienced machinist. Set up, equipment, tooling and technique are critical. This is not a drop in. Figure 3 hours machine/fitting work. When done correctly, the safety does the job - it disconnects the firing pin from the trigger sear, and it blocks the firing pin from forward movement - like a Model 70 safety. Gentry is a good outfit to work with - full support, nice people.

A pain to fit, but indespensable (21.04.2015)

This is an excellent, one of a kind product. It gives Remington 700 owners a true 3 position safety that locks the firing pin and not just the sear. And it also gives you the ability to pull the firing pin and shroud assembly in the field for cleaning or whatever with no tools. All my Remingtons have this mod. True- it is a pain to fit, and you are likely to need a couple spare cocking pieces to screw up on before you get the hang of fitting it. Tip- when you cut the right hand side of the cocking piece to fit the safety lever, cut the contact surface at a 45 degree angle. Tip 2- when drilling the hole for the bolt locking pin, mark the location with a dab of inletting black on the face of the pin. When you get it right, this is a very handy addition to any Rem 700.

Good Product BUT---- (27.11.2017)

Safety works very well - HOWEVER, be very careful when disassembling the bolt for cleaning. If you use one of the firing pin retraction tools to pull back the pin, the safety assembly can turn a slight amount clockwise. This will immediately lock the safety assembly to the bolt. Efforts to unlock the safety assembly from the bolt will destroy the safety. Bottom line - the only safe way to disassemble the safety from the bolt body is to use the middle position and unscrew the unit.

Works on Stoll Kodiak (11.12.2017)

I had one of these installed on a Stolle Kodiak action by Bruce Thom of BAT machine, way back when he was just a wee tool and die maker at Key tropic corp. It is functioning perfectly to this day, even though I gave the rifle to my buddy's son for his graduation present. This rifle has been wet, dirty, cold, etc as it is used to kill varmints. Excellent product, if you have a top notch gunsmith to install it.

Les 5 flere anmeldelser fra brownells.com

3349 3349 1 NOK

Produktnr.: 339000001
GENTRY CUSTOM RIGHT HAND BLUE SAFETY ONLY
Produsentnr.: NONE All-machinert ståldeksel og spake oppgraderer Remington 700-mekanismen til en tresifret sikkerhet. Lar deg bruke match grade avtrekkere som mangler en sikkerhet. Gir låst sluttstykke, åpent sluttstykke og ildposisjoner med positive detenter. Ingen verktøy nødvendig for å feltstrippe for rengjøring, service. Tilgjengelig polert blått. Krever installasjon av børsemaker.

3349 NOK 4 kr 3 349,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Make: Remington Modell: 700

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Oppgraderer Remington 700-mekanismen til en tresifret sikkerhet, som gir låst sluttstykke, åpent sluttstykke og ildposisjoner.
Ingen verktøy nødvendig for å feltstrippe for rengjøring og service; krever installasjon av børsemaker.
All-maskinert ståldeksel og spake, tilgjengelig i polert blått; passer til flere Remington-modeller som 700/7/721/722/600/660/XP-100.

Attributes

Make: Remington Modell: 700 Leveringsvekt: 0,045kg Frakthøyde: 10mm Fraktbredde: 76mm Fraktlengde: 109mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Oppgrader din Remington 700 med Gentry Custom treposisjon sikkerhet! 🔒 Enkel installasjon, perfekt for match grade avtrekkere.

Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles

SPECS: Safety - 4140 steel, polished blue (PB). Approx. 2" (5cm) OAL, 2.5 oz. (71g) wt. Fits Remington 700/7/721/722/600/660/XP-100. Right- (RH).

Mer...

Side Swing-stil for å oppgradere fabrikkvåpen eller bygge tilpassede rifler

SPECS: Sikkerhet - 4140 stål, polert blått (PB). Omtrentlig 2" (5cm) OAL, 2.5 oz. (71g) vekt. Passer til Remington 700/7/721/722/600/660/XP-100. Høyre- (RH).

Mer...