Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

Oppgrader din Remington 700 med vårt riveted extractor kit 🔧! Enkel installasjon for eldre rifler uten modifikasjoner.

BROWNELLS REMINGTON 700 RIVETED EXTRACTOR KITS - BROWNELLS REMINGTON 700-STYLE RIVETED EXTRACTOR KIT SMALL

080000208

Top takeaways

  1. Erstatter fabrikkdelen fra Remington for å holde eldre rifler i skyteklar stand uten behov for fabrikksreparasjon.
  2. Passer alle varianter av Remington 700, 600, 600M, 660, 742, 760, 788, 40X og XP-100, med kalibre som har .378" diameter på hylsehodet.
  3. Inkluderer ekstraktor, (2) niter, og instruksjoner; krever installasjon av gunsmith.

Attributes

  • Make: Remington
  • Modell: 700
  • Leveringsvekt: 0,136kg
  • Frakthøyde: 25mm
  • Fraktbredde: 84mm
  • Fraktlengde: 150mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x
  • Spesifikasjoner:
  • Make: Remington
  • Modell: 700
0 0 1 NOK

Ikke tilgjengelig.

Produktnr.: 080000208

Varsle ved tilgjengelighet 749 NOK
  • Spesifikasjoner:
  • Make: Remington
  • Modell: 700

Beskrivelse:

Vis original (engelsk)
Fabrikklignende erstatning gjenoppretter funksjon og servicevennlighet
Erstatter den ikke-lenger-tilgjengelige fabrikkdelen fra Remington for å holde eldre rifler i skyteklar stand. En rask og økonomisk løsning i stedet for å sende riflen tilbake til fabrikken for reparasjon. Bytte krever ingen modifikasjon av bolten eller riflen. Passer alle varianter av 700, 600, 600M, 660, 742, 760, 788, 40X og XP-100. Small passer kalibre med .378" (9.60mm) diameter på hylsehodet, inkludert .17 Rem., .222, .223, osv.

Top takeaways

  1. Erstatter fabrikkdelen fra Remington for å holde eldre rifler i skyteklar stand uten behov for fabrikksreparasjon.
  2. Passer alle varianter av Remington 700, 600, 600M, 660, 742, 760, 788, 40X og XP-100, med kalibre som har .378" diameter på hylsehodet.
  3. Inkluderer ekstraktor, (2) niter, og instruksjoner; krever installasjon av gunsmith.

Attributes

  • Make: Remington
  • Modell: 700
  • Leveringsvekt: 0,136kg
  • Frakthøyde: 25mm
  • Fraktbredde: 84mm
  • Fraktlengde: 150mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Kundeanmeldelser

Kundevurderinger (2)

4,5 / 5
Klart anbefalt

Brownells USA Just the first try, but... 18.09.2013

After checking with Brownell's techs, and getting a negative, I decided to take a chance and try this on a 7 mag. I had already determined that the factory part would not hold its shape from a failed try. The main material of the Brownell's is not quite a thou thicker than the original. The hook seems correctly located. The hook itself is about 0.010" thicker than the 7 mag. But bevels normally have to be cut anyway, so I figured that that could come down with the rest. After bevelling, I discovered that the rivet head must be fully flush, unlike "normal fit". But that was also easy with the stone still in the grinder. IT WORKED! Also, with normal instructions to "bend the ends in", the '06 head took care of that. Both bends at the end of the hook required some straightening. But I should give the standard disclaimer that your results may vary. Brownell does NOT recommend this, nor do I at this stage. I'll have to do a couple more to feel confident. But that will be my first choice next time.

Anbefalt

Brownells USA that was so easy 26.05.2010

My extractor start slippin off the rounds while cycling the bolt. I had about 2300 rds on it. I know better than to do a Sako mod to a Remmy bolt so I got the original style...very easy to do. Extracts round wit ease...let's see another 2300 minimum. This extactor lips is about 2 millimeters wider than original. Should last a lot longer

Tilbake til toppen