Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

APEX TACTICAL SPECIALTIES INC
M&P RED FLAT FACE FORWARD SET TRIGGER

856008005529 100017344
The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

3699 3699 1 NOK
Produktnr.: 100017344
APEX TACTICAL SPECIALTIES INC RED FLAT FACED FORWARD SET SEAR & TRIGGER KIT M&P
Produsentnr.: 100-055 856008005529 Den nye Flat Faced Forward Set Trigger leverer en følelse og ytelse som en fabrikkprodusert 1911-type avtrekker med en omtrentlig vekt på 3,0 til 4,0 lbs. Designet for å fungere i enhver Smith & Wesson M&P modellpistol i en sentervåpen kaliber (unntatt Shield), reduserer Apex Flat Faced Forward Set Trigger Kit avtrekkerens for-reise og over-reise, samtidig som skytteren kan plassere fingeren på et økt innflytelsespunkt lavere på avtrekkerflaten for å dra nytte av lavere avtrekkervekter. Flat Faced Forward Set Trigger alene er designet for å fungere med ditt eksisterende Apex Forward Set Sear kit og vil ikke fungere med Smith & Wesson's originale avtrekksdeler. Inkludert i det komplette settet er Apex Forward Set Sear som forkorter avtrekkerens slag ved å slippe tennstempelet på et punkt lenger frem enn fabrikkens sear. Ultimate Striker Block produserer en jevnere avtrekk og eliminerer de fleste problemer med falsk tilbakestilling gjennom en forbedret radius på strikerblokkens flate. Forward Set Springs kit produserer en avtrekkervekt på 3,0 til 4,0 lbs, avhengig av hvilken avtrekkerreturfjær som er installert. Krever bruk av searhusblokken designet for den store størrelsen på searplungeren og fjæren (gjeldende produksjon fra juni 2011) ANBEFALES ikke for tjeneste/bære applikasjoner. Passer ikke til M&P 2.0 Pistoler
3699 NOK 10 kr 3 699,00 *
Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA
Spesifikasjoner: Finish: Red Make: Smith & Wesson Modell: M&P Style: Competition, Enhanced

Attributes

Finish: Red Make: Smith & Wesson Modell: M&P Style: Enhanced,Competition Leveringsvekt: 0,005kg Frakthøyde: 20mm Fraktbredde: 79mm Fraktlengde: 89mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c




The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

Nyhetsbrev