Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

APEX TACTICAL SPECIALTIES INC M&P RED FLAT FACE FORWARD SET TRIGGER


Red Flat Faced Forward Set Sear & Trigger Kit M&P

Auto-oversatt beskrivelse (Beskrivelse - Produsent): Den nye Flat Faced Forward Set Trigger gir en følelse og ytelse av en fabrikkutløser av typen 1911 med en tilnærmet vekt fra 3,0 til 4,0 kg. Apex Flat Faced Forward Set Trigger Kit, som er designet for å fungere i en hvilken som helst Smith & Wesson M & P-modellpistol i et midtklynkaliber (unntatt skjold). pek lavere på avtrekkersiden for å dra nytte av nedre trekkvekt. Mer...

Produktnr.: 100017344 856008005529 100017344
The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

3758 3758 1 NOK
100017344
Red Flat Faced Forward Set Sear & Trigger Kit M&P
Produsentnr.: 100055 856008005529 Den nye Flat Faced Forward Set Trigger gir en følelse og ytelse av en fabrikkutløser av typen 1911 med en tilnærmet vekt fra 3,0 til 4,0 kg. Apex Flat Faced Forward Set Trigger Kit, som er designet for å fungere i en hvilken som helst Smith & Wesson M & P-modellpistol i et midtklynkaliber (unntatt skjold). pek lavere på avtrekkersiden for å dra nytte av nedre trekkvekt. Flat Faced Forward Set Trigger i seg selv er designet for å fungere med det eksisterende Apex Forward Set Sear-settet, og vil ikke fungere med fabrikk Smith & Wesson brannkontrolldeler. Inkludert i hele settet er Apex Forward Set Sear, som forkorter hjerneslaget på avtrekkeren ved å slippe spissen på et punkt lenger fram enn fabrikkskjæret. Ultimate Striker Block produserer et jevnere utløsertrekk og eliminerer de fleste falske tilbakestillingsproblemer gjennom en forbedret radius på angriperblokkens ansikt. Forward Set Springs-settet produserer et avtrekkstrekk på 3,0 til 4,0 pund, avhengig av hvilken avtrekksfjær som er innmontert. Krever bruk av searhusblokken designet for store stempel og fjær av stor størrelse (nåværende produksjon fra juni 2011) IKKE anbefalt for bruk / bruk. Passer ikke til M&P 2.0-pistoler
3758 NOK 23 kr 3 758,00 *

10+ på lager
Spesifikasjoner: Finish: Red Make: Smith & Wesson Model: M&P Style: Competition, Enhanced

Attributes

Finish: Red Make: Smith & Wesson Model: M&P Style: Enhanced,Competition

Elementdetaljer

Made in USA




The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols