The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro
Innovativt og modulært montasjesystem for optikk
Den patentbeskyttede Arisaka Offset Optic Mount er en modulær monteringsløsning som lar brukeren velge mellom 35 eller 45 graders offset posisjon for et rødpunktsikte uten behov for ekstra komponenter. 35 graders posisjon bringer rødpunktsiktet nærmere slankere, mindre kikkertsikter, mens 45 graders posisjon gir ekstra klaring rundt bredere tårn eller større, høyere forstørrelsessikter.
Design og funksjonalitet
Arisaka Offset Optic Mount er designet for å festes på den øverste Picatinny-skinnen på en AR15-rifle. Når riflen er vinklet for å bruke det offset rødpunktsiktet, forblir optikken sentrert over løpet og opprettholder en lavere 1/3 co-witness høyde. Basen og optikkplatene kan reverseres, noe som gjør at de kan brukes på venstre eller høyre side.
Kjøpsalternativer
Basen og platene kan kjøpes hver for seg eller som en kombinasjon, noe som gir en oppgraderingsmulighet i fremtiden ettersom brukerne skaffer seg nye rødpunktsikter.
Spesifikasjoner
- Vekt: 1.9 oz uten optikk.
- Lengde: 1.0" for basen, som opptar tre Picatinny-spor (tvillingrecoil-lugger og klemmeskrue).
- Høyde: Basen sitter 0.180" over overflaten av Picatinny-skinnen.
- Materiale: CNC-maskinert fra 6061-T6 aluminium og MIL-A-8625 Type III hard coat anodisert.
- Inkludert: IP20 og IP27 Torx Plus bit-drivere med hver base.
Standard høyde (for 1.5" til 1.8" kikkertsikter):
- Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (ikke 5X), Holosun HS403 (ikke A), HS503, HS515, HS530
- Plate 6: Aimpoint Acro
Tall høyde (1.9" til 2.2" kikkertsikter):
- Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
- Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (ikke 5X), Holosun HS403 (ikke A), HS503, HS515, HS530
- Plate 12: Aimpoint Acro