Oversized, steel takedown screw allows easy lever removal for a thorough cleaning, plus makes quick work when swapping standard levers for large loop levers for cowboy action shooting. Large diameter, knurled head provides a non-slip grasp during installation and removal. Replaces the original, factory lever screw without alteration.
SPECS: Steel, blued, matte finish. Fits Marlin 336, 1894, 1895, 30AS, and 30AW lever action rifles with 12-28 NF male thread.
Mer...
For Rask Hevelfjerning & Installasjon
Oversized, stål takedown skrue gjør det enkelt å fjerne hevelen for en grundig rengjøring, i tillegg til at det gjør jobben rask når man bytter standard hevler med store løkke hevler for cowboy action skyting. Stor diameter, riflet hode gir et sklisikkert grep under installasjon og fjerning. Erstatter den originale fabrikkhevleskruen uten modifikasjoner.
SPECS: Stål, blånet, matt finish. Passer til Marlin 336, 1894, 1895, 30AS og 30AW lever action rifler med 12-28 NF hanntråd.
Mer...
Kundevurderinger for BROWNELLS QUICK TAKEDOWN SCREW FOR MARLIN 336
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 2,2
Marlin 336 Takedown screw - great(08.10.2010)
Great workmanship, clean knurling, good fit. Speeds up take down for thorough cleaning from breech. Great for Cowboy Action shooters.
Handy Marlin accessory(13.09.2012)
Fitted to a 336 444Marlin to replace the standard lever pivot screw. Much more convenient to remove lever and bolt for cleaning from breech end or rifle maintenance. Low profile dosen't snag or come loose. I have another on a Marlin 336 30-30 and it works just as well. An excellent and cheap up-grade.
Buyers Beware(22.07.2014)
Even though the SPECs claim that it will fit a Marlin 1894, it wasn't even close. It cost me almost as much in shipping it both ways as to just keeping the worthless screw.
Got screwed!(28.01.2015)
Very poor quality manufacture. Starting thread is not correct. Flat headed end for threading. OEM's utilize a slightly pointed starting end for ease of starting into female thread. These threads are oversized and stretched the original hole size as the original screw now has a loose fit. It originally was slightly snug. Starting threads are too thick due to the flat end on this screw. I would expect this quality from China, but not Brownell. Will not waste time in making purchases here again. Firearms deserve quality parts and this is far from that.
Wrong size thread(17.05.2015)
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.
Wrong size thread for Marlin 336(15.11.2015)
Wrong size thread
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.
Produktnr.: 080000559 BROWNELLS QUICK TAKEDOWN SCREW FOR MARLIN 336 Oversized, stål takedown skrue gjør det enkelt å fjerne hevelen for en grundig rengjøring, i tillegg til at det gjør jobben rask når man bytter standard hevler med store løkke hevler for cowboy action skyting. Stor diameter, riflet hode gir et sklisikkert grep under installasjon og fjerning. Erstatter den originale fabrikkhevleskruen uten modifikasjoner.
229NOK28kr 229,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Oversized, steel takedown screw allows easy lever removal for a thorough cleaning, plus makes quick work when swapping standard levers for large loop levers for cowboy action shooting. Large diameter, knurled head provides a non-slip grasp during installation and removal. Replaces the original, factory lever screw without alteration.
SPECS: Steel, blued, matte finish. Fits Marlin 336, 1894, 1895, 30AS, and 30AW lever action rifles with 12-28 NF male thread.
Mer...
For Rask Hevelfjerning & Installasjon
Oversized, stål takedown skrue gjør det enkelt å fjerne hevelen for en grundig rengjøring, i tillegg til at det gjør jobben rask når man bytter standard hevler med store løkke hevler for cowboy action skyting. Stor diameter, riflet hode gir et sklisikkert grep under installasjon og fjerning. Erstatter den originale fabrikkhevleskruen uten modifikasjoner.
SPECS: Stål, blånet, matt finish. Passer til Marlin 336, 1894, 1895, 30AS og 30AW lever action rifler med 12-28 NF hanntråd.
Mer...
Kundevurderinger for BROWNELLS QUICK TAKEDOWN SCREW FOR MARLIN 336
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 2,2
Marlin 336 Takedown screw - great(08.10.2010)
Great workmanship, clean knurling, good fit. Speeds up take down for thorough cleaning from breech. Great for Cowboy Action shooters.
Handy Marlin accessory(13.09.2012)
Fitted to a 336 444Marlin to replace the standard lever pivot screw. Much more convenient to remove lever and bolt for cleaning from breech end or rifle maintenance. Low profile dosen't snag or come loose. I have another on a Marlin 336 30-30 and it works just as well. An excellent and cheap up-grade.
Buyers Beware(22.07.2014)
Even though the SPECs claim that it will fit a Marlin 1894, it wasn't even close. It cost me almost as much in shipping it both ways as to just keeping the worthless screw.
Got screwed!(28.01.2015)
Very poor quality manufacture. Starting thread is not correct. Flat headed end for threading. OEM's utilize a slightly pointed starting end for ease of starting into female thread. These threads are oversized and stretched the original hole size as the original screw now has a loose fit. It originally was slightly snug. Starting threads are too thick due to the flat end on this screw. I would expect this quality from China, but not Brownell. Will not waste time in making purchases here again. Firearms deserve quality parts and this is far from that.
Wrong size thread(17.05.2015)
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.
Wrong size thread for Marlin 336(15.11.2015)
Wrong size thread
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.