Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Mer...
Originale Mil Spec kammerbørster
Original militær design, M16, med 8-36 gjenger for direkte gjenging i "Rengjøringsstang, små armer", eller AR-15 med 8-32 gjenger for å passe til standard stenger. AR-10 renser det større .308-kammeret som brukes på disse riflene. Bust i bronse passer til kammer, lengre, rustfrie stålputer, rene låsefestehuller.
SPECS: M16 - NSN 1005-00-999-1435, har 8-36 militær tråd. Oppfyller Mil Spec: MIL-B-20100C. AR-15 og AR-10 har 8-32 standard tråd. M16 og AR-15 er totalt 9,8 cm. AR-10, 4 3/8 "(11,2 cm).
Mer...
Kundevurderinger for BROWNELLS AR-10/AR-308 CHAMBER BRUSH 8-32M THREADS
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,8
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.
Produktnr.: 084116025 BROWNELLS AR-10/AR-308 CHAMBER BRUSH 8-32M THREADS Original militær design, M16, med 8-36 gjenger for direkte gjenging i "Rengjøringsstang, små armer", eller AR-15 med 8-32 gjenger for å passe til standard stenger. AR-10 renser det større .308-kammeret som brukes på disse riflene. Bust i bronse passer til kammer, lengre, rustfrie stålputer, rene låsefestehuller.
169NOK189kr 169,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 084116016 BROWNELLS AR-15/M16 CHAMBER BRUSH 8-36M THREADS Original militær design, M16, med 8-36 gjenger for direkte gjenging i "Rengjøringsstang, små armer", eller AR-15 med 8-32 gjenger for å passe til standard stenger. AR-10 renser det større .308-kammeret som brukes på disse riflene. Bust i bronse passer til kammer, lengre, rustfrie stålputer, rene låsefestehuller.
219NOK143kr 219,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 084116015 BROWNELLS AR-15/M16 CHAMBER BRUSH 8-32M THREADS Produsentnr.: MR140660050806111424 Original militær design, M16, med 8-36 gjenger for direkte gjenging i "Rengjøringsstang, små armer", eller AR-15 med 8-32 gjenger for å passe til standard stenger. AR-10 renser det større .308-kammeret som brukes på disse riflene. Bust i bronse passer til kammer, lengre, rustfrie stålputer, rene låsefestehuller.
239NOK0kr 239,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Mer...
Originale Mil Spec kammerbørster
Original militær design, M16, med 8-36 gjenger for direkte gjenging i "Rengjøringsstang, små armer", eller AR-15 med 8-32 gjenger for å passe til standard stenger. AR-10 renser det større .308-kammeret som brukes på disse riflene. Bust i bronse passer til kammer, lengre, rustfrie stålputer, rene låsefestehuller.
SPECS: M16 - NSN 1005-00-999-1435, har 8-36 militær tråd. Oppfyller Mil Spec: MIL-B-20100C. AR-15 og AR-10 har 8-32 standard tråd. M16 og AR-15 er totalt 9,8 cm. AR-10, 4 3/8 "(11,2 cm).
Mer...
Kundevurderinger for BROWNELLS AR-10/AR-308 CHAMBER BRUSH 8-32M THREADS
Antall vurderinger: 6
Fra brownells.com: 6
Gjennomsnittsvurdering: 4,8
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.