Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

SADLAK INDUSTRIES
M14/M1A TACTICAL MAGAZINE RELEASE

100004037

Oversize Pad For Fast Magazine Changes

Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.

SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.

Mer...

Oversize Pad for raske magasinendringer

Ekstra stor, lett tilgjengelig magasinutløserspake erstatter den originale fabrikkdelen for raske, positive mag-endringer under kamp eller konkurranse. Overdimensjonal pute med vertikal, takket overflate gir perfekt justering med fingeren for en positiv, sklisikker frigjøring i alle værforhold. Maskinert fra herdet stål for økt holdbarhet, deretter Parkerisert for overlegen slitestyrke og korrosjonsbeskyttelse.

SPECS: Stål, parkert finish. Herdet til Rc 55. 1-13⁄16 "(2,6 cm) OAL. Pute - 13⁄16" (4,6 cm) lang x 13⁄16 "(4,6 cm) bred, 0,7 oz. (19,8 g) vekt. Mindre montering kreves, inkluderer monteringspinner.

Mer...

Kundevurderinger for SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,8

A must have! (16.01.2010)

Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.

great product (19.05.2010)

very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast

good add on part (21.08.2010)

This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.

For USGI spec rifles.Will not fit metric (11.07.2012)

This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.

Great fit on Springfield bush rifle (27.08.2012)

A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.

worth buying (12.09.2012)

great for quick easy mag changes, install 15-20 mins.

GREAT ADDITION TO MY RIFLE (27.11.2012)

I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.

Mag changes made easy (20.03.2015)

Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.

<img width="500" src='/userdocs/reviewimages/7dfaca20-1efc-4518-8d4e-8bae12ef084d.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/7069a078-c683-4bd2-bc10-54e88669126d.jpg' alt=''>

Well worth it (24.03.2015)

Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.

Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.

Good part. Worth it (03.03.2016)

Great addition. Easier to find in a rush, or when wearing gloves.

Les 10 flere anmeldelser fra brownells.com

799 799 1 NOK

Produktnr.: 100004037
SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Produsentnr.: 140040 Ekstra stor, lett tilgjengelig magasinutløserspake erstatter den originale fabrikkdelen for raske, positive mag-endringer under kamp eller konkurranse. Overdimensjonal pute med vertikal, takket overflate gir perfekt justering med fingeren for en positiv, sklisikker frigjøring i alle værforhold. Maskinert fra herdet stål for økt holdbarhet, deretter Parkerisert for overlegen slitestyrke og korrosjonsbeskyttelse.

799 NOK 0 kr 799,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: Springfield Modell: M14, M1A

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Springfield Modell: M14,M1A Leveringsvekt: 0,023kg Høyde: 10mm Bredde: 66mm Lengde: 130mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Oversize Pad For Fast Magazine Changes

Mer...

Oversize Pad for raske magasinendringer

Mer...

Kundevurderinger for SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,8

A must have! (16.01.2010)

Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.

great product (19.05.2010)

very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast

good add on part (21.08.2010)

For USGI spec rifles.Will not fit metric (11.07.2012)

Great fit on Springfield bush rifle (27.08.2012)

A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.

worth buying (12.09.2012)

great for quick easy mag changes, install 15-20 mins.

GREAT ADDITION TO MY RIFLE (27.11.2012)

I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.

Mag changes made easy (20.03.2015)

Well worth it (24.03.2015)

Good part. Worth it (03.03.2016)

Great addition. Easier to find in a rush, or when wearing gloves.

Les 10 flere anmeldelser fra brownells.com

Kunder kjøpte også

BROWNELLS PRO-SPRING KIT #M14-945 FOR SPRINGFIELD M14, M1A
M14/M1A SPRING KIT

BROWNELLS

Kommer til lager Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

kr 499,00 *

Fjærer

CHECK-MATE INDUSTRIES SPRINGFIELD M1A/M14 MAGAZINE 308 WINCHESTER 5RD STEEL BLACK
SPRINGFIELD M1A 10RD MAGAZINE 308 WINCHESTER

CHECK-MATE INDUSTRIES

På lager Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

kr 499,00 * kr 499,00 - kr 2 699,00*

Magasiner | Magazines

4,7

Smith Enterprise STRAP-ON CHEEK PIECE TAN NYLON
RIFLE STRAP-ON CHEEK PIECE

Smith Enterprise

På lager Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

kr 1 199,00 *

Kinnstøtte

SADLAK INDUSTRIES GAS CYLINDER WRENCH
M14/M1A GAS CYLINDER WRENCH

SADLAK INDUSTRIES

Kommer til lager Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

kr 599,00 *

Gas System Verktøy

FULTON ARMORY SPRINGFIELD M14 GAS CYLINDER SHIM SET
M14 GAS CYLINDER SHIMS

FULTON ARMORY

På lager Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

kr 379,00 *

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.