Rock-Solid, Low-Profile Mount for Popular Harris Bipods
The Badger Ordnance Low-Profile Harris Bipod Mount replaces your current mounting plate and thumbscrew to provide a more streamlined, lower-profile attachment point for Harris Engineering swivel-style bipods. It can be easily installed for use with any Harris BRM-S bipod in just a few minutes. Badger Ordnance’s engineers designed the Low-Profile Harris Bipod Mount to be strong enough that it can even be used for barricade-braced shooting without the risk of the mount breaking. For use with Harris BRM-S bipods Includes all necessary mounting hardware - Installation tool is not included Picatinny model attaches to any MIL-STD 1913 Picatinny accessory rail M-LOK® attaches to any handguard with Magpul M-LOK® attachment points The strength of Badger Ordnance’s Low-Profile Harris Bipod Mount comes from its construction. It’s machined from extra-strong 7075 T6 aluminum alloy - no flimsy plastic parts to fail - with a tough, corrosion-resistant Type III hardcoat anodized finish for a lifetime of stalwart service.
Mer...
Solid, lavprofilert festeanordning for populære Harris Bipoder
Badger Ordnance Low-Profile Harris Bipod Mount erstatter din nåværende monteringsplate og tommelskrue for å gi et mer strømlinjeformet, lavprofilert feste for Harris Engineering svingbare bipoder. Den kan enkelt installeres for bruk med enhver Harris BRM-S bipod på bare noen få minutter. Ingeniørene hos Badger Ordnance har designet Low-Profile Harris Bipod Mount for å være sterk nok til at den til og med kan brukes for skyting med støtte mot barrikader uten risiko for at festet bryter. For bruk med Harris BRM-S bipoder Inkluderer all nødvendig monteringsutstyr - Verktøy for installasjon er ikke inkludert Picatinny-modellen festes til enhver MIL-STD 1913 Picatinny-tilbehørsrail M-LOK® festes til enhver forskjeft med Magpul M-LOK® festepunkter Styrken til Badger Ordnance Low-Profile Harris Bipod Mount kommer fra dens konstruksjon. Den er maskinert fra ekstra sterk 7075 T6 aluminiumslegering - ingen svake plastdeler som vil feile - med en robust, korrosjonsbestandig Type III hardcoat anodisert finish for en livstids pålitelig tjeneste.
Mer...
Kundevurderinger for BADGER ORDNANCE LOW PROFILE HARRIS MOUNT MLOK
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 5
A must have(12.08.2018)
This mount is a must have for any SBRM Harris bipod. It replaces the sling stud mount and mounts directly to a picatinnny rail section. It allows for a much lower profile than using an adapter and creates a rock solid attachment that wonât come lose or rotate or slide around like the stock mount. Itâs obviously more expensive than buying a $20 YHM adapter, but it shaves about 2oz, is lower profile, and far more solid. It is not QD, but I never remove my bipods so this is actually a pro for me as it saves weight and size compared to a QD mount.
Produktnr.: 093000107 BADGER ORDNANCE LOW PROFILE HARRIS MOUNT MLOK Produsentnr.: 58801 Badger Ordnance Low-Profile Harris Bipod Mount erstatter din nåværende monteringsplate og tommelskrue for å gi et mer strømlinjeformet, lavprofilert feste for Harris Engineering svingbare bipoder. Den kan enkelt installeres for bruk med enhver Harris BRM-S bipod på bare noen få minutter. Ingeniørene hos Badger Ordnance har designet Low-Profile Harris Bipod Mount for å være sterk nok til at den til og med kan brukes for skyting med støtte mot barrikader uten risiko for at festet bryter. For bruk med Harris BRM-S bipoder Inkluderer all nødvendig monteringsutstyr - Verktøy for installasjon er ikke inkludert Picatinny-modellen festes til enhver MIL-STD 1913 Picatinny-tilbehørsrail M-LOK® festes til enhver forskjeft med Magpul M-LOK® festepunkter Styrken til Badger Ordnance Low-Profile Harris Bipod Mount kommer fra dens konstruksjon. Den er maskinert fra ekstra sterk 7075 T6 aluminiumslegering - ingen svake plastdeler som vil feile - med en robust, korrosjonsbestandig Type III hardcoat anodisert finish for en livstids pålitelig tjeneste.
1549NOK0kr 1 549,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Finish:
Matte Black
Style:
M-LOK
Leveringsvekt: 0,068kgFrakthøyde: 38mmFraktbredde: 38mmFraktlengde: 127mm
Elementdetaljer
Made in USA
Produktnr.: 093000108 BADGER ORDNANCE LOW PROFILE HARRIS MOUNT PICATINNY Produsentnr.: 53401 Badger Ordnance Low-Profile Harris Bipod Mount erstatter din nåværende monteringsplate og tommelskrue for å gi et mer strømlinjeformet, lavprofilert feste for Harris Engineering svingbare bipoder. Den kan enkelt installeres for bruk med enhver Harris BRM-S bipod på bare noen få minutter. Ingeniørene hos Badger Ordnance har designet Low-Profile Harris Bipod Mount for å være sterk nok til at den til og med kan brukes for skyting med støtte mot barrikader uten risiko for at festet bryter. For bruk med Harris BRM-S bipoder Inkluderer all nødvendig monteringsutstyr - Verktøy for installasjon er ikke inkludert Picatinny-modellen festes til enhver MIL-STD 1913 Picatinny-tilbehørsrail M-LOK® festes til enhver forskjeft med Magpul M-LOK® festepunkter Styrken til Badger Ordnance Low-Profile Harris Bipod Mount kommer fra dens konstruksjon. Den er maskinert fra ekstra sterk 7075 T6 aluminiumslegering - ingen svake plastdeler som vil feile - med en robust, korrosjonsbestandig Type III hardcoat anodisert finish for en livstids pålitelig tjeneste.
1549NOK2kr 1 549,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Rock-Solid, Low-Profile Mount for Popular Harris Bipods
The Badger Ordnance Low-Profile Harris Bipod Mount replaces your current mounting plate and thumbscrew to provide a more streamlined, lower-profile attachment point for Harris Engineering swivel-style bipods. It can be easily installed for use with any Harris BRM-S bipod in just a few minutes. Badger Ordnance’s engineers designed the Low-Profile Harris Bipod Mount to be strong enough that it can even be used for barricade-braced shooting without the risk of the mount breaking. For use with Harris BRM-S bipods Includes all necessary mounting hardware - Installation tool is not included Picatinny model attaches to any MIL-STD 1913 Picatinny accessory rail M-LOK® attaches to any handguard with Magpul M-LOK® attachment points The strength of Badger Ordnance’s Low-Profile Harris Bipod Mount comes from its construction. It’s machined from extra-strong 7075 T6 aluminum alloy - no flimsy plastic parts to fail - with a tough, corrosion-resistant Type III hardcoat anodized finish for a lifetime of stalwart service.
Mer...
Solid, lavprofilert festeanordning for populære Harris Bipoder
Badger Ordnance Low-Profile Harris Bipod Mount erstatter din nåværende monteringsplate og tommelskrue for å gi et mer strømlinjeformet, lavprofilert feste for Harris Engineering svingbare bipoder. Den kan enkelt installeres for bruk med enhver Harris BRM-S bipod på bare noen få minutter. Ingeniørene hos Badger Ordnance har designet Low-Profile Harris Bipod Mount for å være sterk nok til at den til og med kan brukes for skyting med støtte mot barrikader uten risiko for at festet bryter. For bruk med Harris BRM-S bipoder Inkluderer all nødvendig monteringsutstyr - Verktøy for installasjon er ikke inkludert Picatinny-modellen festes til enhver MIL-STD 1913 Picatinny-tilbehørsrail M-LOK® festes til enhver forskjeft med Magpul M-LOK® festepunkter Styrken til Badger Ordnance Low-Profile Harris Bipod Mount kommer fra dens konstruksjon. Den er maskinert fra ekstra sterk 7075 T6 aluminiumslegering - ingen svake plastdeler som vil feile - med en robust, korrosjonsbestandig Type III hardcoat anodisert finish for en livstids pålitelig tjeneste.
Mer...
Kundevurderinger for BADGER ORDNANCE LOW PROFILE HARRIS MOUNT MLOK
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 5
A must have(12.08.2018)
This mount is a must have for any SBRM Harris bipod. It replaces the sling stud mount and mounts directly to a picatinnny rail section. It allows for a much lower profile than using an adapter and creates a rock solid attachment that wonât come lose or rotate or slide around like the stock mount. Itâs obviously more expensive than buying a $20 YHM adapter, but it shaves about 2oz, is lower profile, and far more solid. It is not QD, but I never remove my bipods so this is actually a pro for me as it saves weight and size compared to a QD mount.