Din handlekurv er tom.

Handlekurv

37 17 00 00

LACQUER-STIK ? COLOR FILL LACQUER STICK®

Auto-oversatt beskrivelse (Beskrivelse - Produsent): Svært spesialiserte sammensatte tørker for å få stemplede eller graverte inntrykk på ALLE glatte overflater. Ideell for pistoler, deler, tilbehør. Mer...

048615511238 517100004

Hi-Lights Engraving, Stamped #'s And Names

Highly specialized compound wipes on to bring out stamped or engraved impressions on ALL smooth surfaces. Ideal for guns, parts, accessories. Semi-solid in stick form when used, but soon hardens and becomes permanent.

SPECS: 4-5/8" (11.7cm) long. Red, White, Gold, or Black.

Mer...

Hi-Lights Engraving, Stamped # 's And Names

Svært spesialiserte sammensatte tørker for å få stemplede eller graverte inntrykk på ALLE glatte overflater. Ideell for pistoler, deler, tilbehør. Halvsolid i pinneform når den brukes, men herder snart og blir permanent.

SPECS: 11,7 cm lang. Rød, hvit, gull eller svart.

Mer...

Kundevurderinger for LACQUER-STIK ? Black Lacquer Stik®

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4,8

Works great!! (13.05.2011)

I purchased this item along with the white Lacquer Stik and found them to work excellent for highlighting firearm stampings and engravings.A little prep work is required to use them. First remove hardened portion of the stik and rub away over the lettering.Second step is to use a cloth or Q-Tip moistened with mineral oil to remove the excess then let the lacquer air dry (I did mine 24 hrs). That's it!! You're done!! Excellent product for highlighting the "FIRE" stamp in red on your AR!

Perfect (27.08.2011)

I purchased this lacquer stick to color the "fire" selector on my AR-15. No, it wasn't necessary to do so but I have always liked color coded safeties for peace of mind. This has been at least 6 months since the original application and there has been no fading or peeling or anything else. It looks as if I had applied it yesterday. I can't recommend this enough over going through the trouble of actually painting the weapon.

Method I Used For Results (assuming all safety checks have been done and weapon is unloaded):

1) Cleaned area on receiver with rubbing alcohol or other similar product to remove any grease.

2) Wait until completely dry and fumes are gone (I waited 30 minutes just in case.)

3) Using a blow dryer heat up the receiver or area of the weapon you intend to fill in the lettering.

4) Hold lacquer stick under blow dryer for 3-8 seconds to heat up.

5) Rub lacquer stick across area to fill in lettering.

6) Use shop towels (the blue paper towels) with a little oil or cleaner on it to wipe of the excess. Continue wiping around the area, the excess will come off, be patient.

7) Wait for it to dry (30 minutes - 1hr to be safe)

Good product (31.05.2012)

Great porduct for a good price. doesn't wipe off when the oil hit it and stays looking good

Easy to use (27.11.2012)

These lacquer sticks are pretty easy to use. I heat the lacquer stick with a heat gun as well as the work area. I then rub the stick on the item I'm working on. Once enough has built up on the surface, I continue to heat the area with the heat gun so that it liquifies and fills the recessed areas of the item. Once sufficiently coated, I allow the item to cool down. I then use a cleaning patch with some mineral spirits to wipe the area. The goal is to wipe off the high areas and leave the lacquer in the recessed areas. This works quite well. The only issue is solvents and cleaners will easily damage these paint filling.

Works for me. (25.02.2014)

I used this on the "fire" position of my AR lower. It came out looking really nice and wasn't particularly troublesome. I cut off the very end to expose the soft inside of the stik and set to work. I applied it cold. It went on very easily, although it did take some persistence to get it into all the nooks and crannies. Once it was in place I set about wiping away the excess. It didn't seem very happy to be evicted from its new home, and it left some ghosting around the engraving I had filled. I tried several products along with some vigorous scrubbing to remove the ghosting: alcohol, nail polish remover, and Simple Green. The ghosting thinned a little, but was still very noticeable. Running out of options, I saw a bottle of Froglube, the liquid variety and said to myself "couldn't hurt". It took the ghosting right out, but left the fill in place. It's only just been applied so I can't speak to its durability.

Les 5 flere anmeldelser fra brownells.com

77 84 4 NOK

517100004
LACQUER-STIK ? Black Lacquer Stik®
Produsentnr.: 051123 048615511238 Svært spesialiserte sammensatte tørker for å få stemplede eller graverte inntrykk på ALLE glatte overflater. Ideell for pistoler, deler, tilbehør. Halvsolid i pinneform når den brukes, men herder snart og blir permanent.

84 NOK 125 kr 84,00 *

10+ på lager

Spesifikasjoner: Farge: Black

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Farge: Black

Elementdetaljer

Made in USA

517100001
LACQUER-STIK ? Red Lacquer Stik®
Produsentnr.: 0051122 048615511221 Svært spesialiserte sammensatte tørker for å få stemplede eller graverte inntrykk på ALLE glatte overflater. Ideell for pistoler, deler, tilbehør. Halvsolid i pinneform når den brukes, men herder snart og blir permanent.

77 NOK 120 kr 77,00 *

10+ på lager

Spesifikasjoner: Farge: Red

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Farge: Red

Elementdetaljer

Made in USA

Hi-Lights Engraving, Stamped #'s And Names

SPECS: 4-5/8" (11.7cm) long. Red, White, Gold, or Black.

Mer...

Hi-Lights Engraving, Stamped # 's And Names

SPECS: 11,7 cm lang. Rød, hvit, gull eller svart.

Mer...

Kundevurderinger for LACQUER-STIK ? Black Lacquer Stik®

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4,8

Works great!! (13.05.2011)

Perfect (27.08.2011)

Good product (31.05.2012)

Great porduct for a good price. doesn't wipe off when the oil hit it and stays looking good

Easy to use (27.11.2012)

Works for me. (25.02.2014)

Les 5 flere anmeldelser fra brownells.com

Kunder kjøpte også

BROWNELLS Shop Assortment
CELLUPLASTIC TUBES HANDY SHOP ASSORTMENT

BROWNELLS

Ikke tilgjengelig Kan ikke restnoteres for øyeblikket

kr 575,00 * kr 127,00 - kr 822,00*

Vinyl oppbevaringsrør

3,5 (2)

BROWNELLS 5/8" (15mm) Black Vinyl Tube Cap 50 Pack
VINYL TUBE CAPS

BROWNELLS

På lager 2 på lager

kr 468,00 * kr 83,00 - kr 795,00*

Vinyl oppbevaringsrør

0 (0)

POWER CUSTOM Crane Ball Drilling Fixture
CRANE BALL DRILLING FIXTURE for S&W

POWER CUSTOM

På lager 6 på lager

kr 1 426,00 * kr 130,00 - kr 1 426,00*

Crane Tools

0 (0)

POWER CUSTOM Yoke Endshake Bearings, Smith & Wesson K, L, N only
CYLINDER BEARINGS

POWER CUSTOM

På lager 5 på lager

kr 277,00 * kr 276,00 - kr 320,00*

Kammer verktøy

5 (2)

HARRELL 4" Drop Tube 17 cal & 20 cal
EXTRA DROP TUBES

HARRELL

På lager 5 på lager

kr 89,00 * kr 89,00 - kr 90,00*

Kruttmål og dispensere

0 (0)

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.

Priser inkl. mva. pluss levering

Klassisk visning

Mobilvisning