EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: Kimber 1911 (adjustable rear sights for windage and elevation) Ruger SR1911 (adjustable rear sights for windage and elevation)
KIMBER 1911 justerbart sikte for Vortex Viper/Venom
EGW rødpunktsikter er designet for å installeres fra venstre til høyre (med løpet vendt fremover). Dovetailen har en progressiv taper for enklere installasjon.
Følg disse enkle trinnene for å montere ditt Vortex Viper/Venom, Burris FastFire eller Docter rødpunktsikte:
- Fjern bak-siktet på våpenet ditt.
- Installer EGW Sight Mount i dovetailen.
- Stram settskruen (hvis aktuelt).
- Plasser rødpunktsiktet på EGW Sight Mount (legg en liten bit papir mellom rødpunktsiktet og siktemonteringen for enklere fjerning og for å unngå Loctite på rødpunktsiktet).
- Påfør blå Loctite på de medfølgende monteringsskruene.
- Dra til monteringsskruene til 15 in/lbs.
Inkludert i pakken:
- 2 Button Head Cap Screws - For Vortex Viper og Venom Sights
- 2 Flat Head Cap Screws - For Burris FastFire og Docter Sights
Skruene som følger med denne monteringen krever en 5/64'' unbrakonøkkel for installasjon.
Denne monteringen passer til:
- Kimber 1911 (justerbare bak-sikter for vind og høyde)
- Ruger SR1911 (justerbare bak-sikter for vind og høyde)