The Brownells Iron Sight Slide for Glock 19® Gen3 enables you to build a custom Glock®-style pistol with a slide that sports distinctive cocking serrations. The front serrations aid in manipulating the slide, especially for quick chamber checks AND for clearing the occasional jam (caused by problem ammo, of course!). Both the front and rear serrations are cut to the same depth as the Glock® factory slide serrations to ensure preservation of structural rigidity. The top edges and the front around the muzzle area are chamfered to reduce the risk of snagging on clothing and to make holstering the pistol easier. You can get your Brownells Iron Sight Slide for Glock® 19 Gen3 with a solid top and wraparound front cocking serrations OR a window cutout on top between the front side serrations. The window aids in heat dissipation to keep the barrel cool during extended fire. If you have an aftermarket barrel with a contrasting finish and / or fluting, spirals, "flames," or some other a unique exterior pattern, the window also shows off a bit of your pistol's bling. Accepts Gen3 Glock® 19 internal parts Factory cuts for iron sights Sturdy machined 17-4 stainless steel Hardened to Rockwell "C" 41-44 for superb wear resistance Durable, non-reflective matte Black Nitride finish Channel liner not included; please order separately (see note below) Window model available Like all Brownells slides, the Iron Sight model for Glock® 19 Gen3 is precision machined from solid 17-4 stainless steel billet to factory specifications inside so it is compatible with any factory or aftermarket Gen3 internal components. Outside, there's a Glock® factory rear sight dovetail and a standard Glock® front sight tenon cut ready for any factory or aftermarket sights you choose. This is the perfect companion "top-half" for a custom pistol built on a Polymer80 80% frame. Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
Perfekt "Top Half" for en D.I.Y. Tilpasset Pistol
Brownells Iron Sight Slide for Glock 19® Gen3 gjør det mulig for deg å bygge en tilpasset Glock®-stil pistol med en sklie som har distinkte cocking serrations. Front serrations hjelper med å manipulere skuddet, spesielt for raske kammerkontroller OG for å rydde opp i en eventuell blokkering (forårsaket av problematisk ammunisjon, selvfølgelig!). Både front- og bakserrations er kuttet til samme dybde som Glock® fabrikkens skudd serrations for å sikre bevaring av strukturell stivhet.
Funksjoner:
- Kan brukes med Gen3 Glock® 19 interne deler
- Fabrikkkutt for jern sikter
- Robust maskinert 17-4 rustfritt stål
- Herdet til Rockwell "C" 41-44 for utmerket slitasjemotstand
- Holdbar, ikke-reflekterende matt Black Nitride finish
- Kanalforinger ikke inkludert; vennligst bestill separat (se notat nedenfor)
- Vindu modell tilgjengelig
Som alle Brownells skudd, er Iron Sight-modellen for Glock® 19 Gen3 presisjonsmaskinert fra solid 17-4 rustfritt stål billet til fabrikkspesifikasjoner innvendig, så den er kompatibel med alle fabrikk- eller ettermarked Gen3 interne komponenter. Utenpå er det en Glock® fabrikk bak sikte dovetail og et standard Glock® front sikte tenon kutt klart for alle fabrikk- eller ettermarked sikter du velger. Dette er den perfekte "top-half" følgesvenn for en tilpasset pistol bygget på en Polymer80 80% ramme.
Brownells Gun Tech™ Notat: Kanalforing kreves for disse skuddene. Kanalforing er en presspassform og krever et verktøy for installasjon. Vi anbefaler #777-100-017.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning