Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge
100050299
The Hunter Detachable Box Magazine (DBM) bottom metal is designed for shooters that are looking for a flush mounted bottom metal that will accept flush magazines. The DBM is machined from a single piece of billet 6061 and features a patented cantilever spring release that will not open under heavy recoil. The magazine release is also adjustable, sleek and all but impossible to actuate accidentally. Long Action Hunter DBMs require gunsmithing in factory length factory Remington 700 actions and Zermatt Origins to accommodate the magazine COAL. The Hunter DBM is made to fit into an M5 inlet. It is available for Remington 700 actions, and all Remington 700 clones. Comes with pillars and action screws.  / Long Action Magazine Compatibility: Hawkins Flush Hunter Magazines (will not work with CIP length AICS, MDT, or Accurate magazines) / Short Action Magazine Compatibility: Hawkins Flush Hunter Magazines / AICS 5 and 10 round 308 (3901 – 5 Round / 3902 – 10 Round  
3899 3899 2 NOK
Produktnr.: 100050299
HAWKINS PRECISION HUNTER DBM BOTTOM METAL LONG ACTION
Produsentnr.: 3110001 Hunter avtakbare boksmagasin (DBM) bunnmetall er designet for skyttere som ser etter et flushmontert bunnmetall som vil akseptere flush magasiner. DBM er maskinert fra en enkelt blokk av billet 6061 og har en patentert cantilever fjærutløser som ikke vil åpne under kraftig rekyl. Magasinutløseren er også justerbar, elegant og nesten umulig å aktivere ved et uhell. Long Action Hunter DBM krever børsemakerarbeid på fabrikkens lengde på fabrikk Remington 700 handlinger og Zermatt Origins for å tilpasse magasinets COAL. Hunter DBM er laget for å passe inn i en M5 innfelling. Den er tilgjengelig for Remington 700 handlinger, og alle Remington 700 kloner. Leveres med søyler og festeskruer. / Long Action Magasinkompatibilitet: Hawkins Flush Hunter Magasiner (vil ikke fungere med CIP lengde AICS, MDT, eller Accurate magasiner) / Short Action Magasinkompatibilitet: Hawkins Flush Hunter Magasiner / AICS 5 og 10 runder 308 (3901 – 5 Runde / 3902 – 10 Runde)
3899 NOK 5 kr 3 899,00 *
Leveringstid ca. 14-21 dager.
5 stk. på lageret i USA
Spesifikasjoner: Finish: Black Make: Remington Modell: 700

Attributes

Finish: Black Make: Remington Modell: 700 Leveringsvekt: 0,136kg Frakthøyde: 25mm Fraktbredde: 102mm Fraktlengde: 279mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x



Produktnr.: 100050300
HAWKINS PRECISION HUNTER DBM BOTTOM METAL SHORT ACTION
Produsentnr.: 3110002 Hunter avtakbare boksmagasin (DBM) bunnmetall er designet for skyttere som ser etter et flushmontert bunnmetall som vil akseptere flush magasiner. DBM er maskinert fra en enkelt blokk av billet 6061 og har en patentert cantilever fjærutløser som ikke vil åpne under kraftig rekyl. Magasinutløseren er også justerbar, elegant og nesten umulig å aktivere ved et uhell. Long Action Hunter DBM krever børsemakerarbeid på fabrikkens lengde på fabrikk Remington 700 handlinger og Zermatt Origins for å tilpasse magasinets COAL. Hunter DBM er laget for å passe inn i en M5 innfelling. Den er tilgjengelig for Remington 700 handlinger, og alle Remington 700 kloner. Leveres med søyler og festeskruer. / Long Action Magasinkompatibilitet: Hawkins Flush Hunter Magasiner (vil ikke fungere med CIP lengde AICS, MDT, eller Accurate magasiner) / Short Action Magasinkompatibilitet: Hawkins Flush Hunter Magasiner / AICS 5 og 10 runder 308 (3901 – 5 Runde / 3902 – 10 Runde)
3899 NOK 0 kr 3 899,00 *
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner: Finish: Black Make: Remington Modell: 700
The Hunter Detachable Box Magazine (DBM) bottom metal is designed for shooters that are looking for a flush mounted bottom metal that will accept flush magazines. The DBM is machined from a single piece of billet 6061 and features a patented cantilever spring release that will not open under heavy recoil. The magazine release is also adjustable, sleek and all but impossible to actuate accidentally. Long Action Hunter DBMs require gunsmithing in factory length factory Remington 700 actions and Zermatt Origins to accommodate the magazine COAL. The Hunter DBM is made to fit into an M5 inlet. It is available for Remington 700 actions, and all Remington 700 clones. Comes with pillars and action screws.  / Long Action Magazine Compatibility: Hawkins Flush Hunter Magazines (will not work with CIP length AICS, MDT, or Accurate magazines) / Short Action Magazine Compatibility: Hawkins Flush Hunter Magazines / AICS 5 and 10 round 308 (3901 – 5 Round / 3902 – 10 Round  
Nyhetsbrev