HUNT SCOPE RINGS Given the success of their MATCH and TACTICAL scope mounts, Area 419 knew what the HUNT rings needed to be. Light, rigid, and able to hold onto an optic in a dramatic recoiling environment. To do this was no small manufacturing task. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made. Like most rings, these begin as separate parts. Area 419 are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, Area 419 produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in their world-class machining centers. Rings are then brought off the machine in sets, and packaged together so you know that your rings were made for one another, and you can rely on them for decades. Is it overkill? Probably. But Area 419 think it’s the right way. So that’s what Area 419 are going to do. NOTE: TO KEEP THE SIZE AND WEIGHT OF THESE RINGS TO A MINIMUM, THERE ARE NO ACCESSORY ATTACHMENT POINTS ON THESE RINGS. IF YOU WANT TO BE ABLE TO ADD ACCESSORIES TO YOUR RINGS, PLEASE CHECK OUT THEIR MATCH OR TACTICAL OFFERINGS. Specifications: Material: 7075 Aerospace Grade Billet Aluminum (with Stainless Steel Hardware) Coating: Type 3 Hardcoat Anodize (internal bore is raw aluminum) Weight: 4 oz/set (30mm Medium)
Kraftige HUNT SCOPE RINGS for pålitelig optikkfeste
HUNT SCOPE RINGS fra AREA 419 er designet med tanke på letthet og stivhet, og gir et solid grep om optikken selv under kraftige rekylforhold. Med en produksjonsprosess som sikrer at ringene er perfekt tilpasset, kan du stole på at disse ringene vil vare i flere tiår.
Produktegenskaper:
- Materiale: 7075 Aerospace Grade Billet Aluminum (med rustfrie stålkomponenter)
- Behandling: Type 3 Hardcoat Anodize (intern boring er rå aluminium)
- Vekt: 113 g/sett (30mm Medium)
For å oppnå et optimalt produkt, produserer AREA 419 baser og lokk i batcher. I motsetning til mange andre produsenter, som sender delene til anodisering før montering, tar AREA 419 ekstra steg for å sikre kvalitet. Når delene kommer tilbake fra anodisering, blir de fullt montert, plassert i spesiallagde skinnefester, og lokkene blir strammet til spesifikasjon ved hjelp av spesiallagde spacer for å gi ringene riktig plass til å feste seg på optikken.
Er dette overkill? Kanskje. Men AREA 419 mener det er den rette måten å gjøre det på, og det er nettopp det de gjør.
MERK: FOR Å HOLDE STØRRELSE OG VEKT PÅ DISSE RINGENE TIL ET MINIMUM, FINNES DET INGEN TILLEGGSFESTE PUNKTER PÅ DISSE RINGENE. HVIS DU ØNSKER Å LEGGE TIL TILBEHØR TIL RINGENE DINE, VENNLIGST SE PÅ DERES MATCH ELLER TACTICAL TILBUD.