Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS
HIGH-SPEED STEEL CUTTING KITS FOR LATHES - 1/2" THREADER KIT

080000839
Tool Holders & Inserts For Threading
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes one ½" square bar, 5" long with offset end pocket for cutting ID and OD threads; plus, two high-speed steel inserts, TNMC-32NV and TPMC-32NV.

SPECS: Bar - .500" shank, 5.0" OAL, with end pocket offset for ID and OD threads, 1.375" minimum bore diameter, 60°. Inserts - .375 IC, .125 thick, .150 hole. T-15 HSS, one TNMC-32NV and one TPMC-32NV. Includes two 6-32 FH screws and 5⁄64" hex wrench.

2799 2799 1 NOK
Produktnr.: 080000839
BROWNELLS HIGH-SPEED STEEL CUTTING 1/2" THREADER KIT
Produsentnr.: NONE Verktøysettene inkluderer herdede stålinnholdere og høyhastighetsstål (HSS) innlegg for dreining, gjenging, profilering og avstikningsarbeid. Innleggene er T-15 Høyhastighetsstål (HSS) herdet til Rc 65-67, og deretter finslipt på alle sider. De leverer utmerket ytelse ved lave hastigheter, presisjon ved avbrutte kutt, og en glatt overflate på rustfritt stål, Inconel, Monel, eksotiske metaller og plast. Firkantede skaftinnholdere og kjedelige barer er CNC-maskinert fra 4140/4142 stålbarlager, herdet til Rc 48-50, og deretter svartoksidbelagt for å motstå korrosjon. Inkluderer en ½" firkantet bar, 5" lang med forskjøvet endepocket for kutting av ID og OD gjenger; pluss, to høyhastighetsstål innlegg, TNMC-32NV og TPMC-32NV.
2799 NOK 3 kr 2 799,00 *
Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA

Attributes

Leveringsvekt: 0,249kg Frakthøyde: 36mm Fraktbredde: 112mm Fraktlengde: 157mm

Elementdetaljer

Made in USA



Tool Holders & Inserts For Threading
Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed Steel (HSS) hardened to Rc 65-67, then finish ground on all sides. They deliver excellent slow speed performance, precision interrupted cuts, and a smooth finish on stainless steel, Inconel, Monel, exotic metals, and plastics. Square shank toolholders and boring bars are CNC machined from 4140/4142 steel bar stock, hardened to Rc 48-50, and then black oxide coated to resist corrosion. Includes one ½" square bar, 5" long with offset end pocket for cutting ID and OD threads; plus, two high-speed steel inserts, TNMC-32NV and TPMC-32NV.

SPECS: Bar - .500" shank, 5.0" OAL, with end pocket offset for ID and OD threads, 1.375" minimum bore diameter, 60°. Inserts - .375 IC, .125 thick, .150 hole. T-15 HSS, one TNMC-32NV and one TPMC-32NV. Includes two 6-32 FH screws and 5⁄64" hex wrench.

Nyhetsbrev