Comfortable wooden handle and hardened steel cutter give you complete control when you need to straighten out checkering lines which have gone off course. The 60° tool is perfect to accurately lay out the critical, intersecting, master lines. Gives the correct angle and shallow depth of cut so the 2 or 3 edge spacer will precisely fit the groove. The 90° tool works great to sharpen the row as the pattern nears completion, bringing the lines to full depth. A real job saver. To learn more, read Monty Kennedy's Checkering and Carving of Gunstocks and Bob Sconce's fine checkering articles in Gunsmith Kinks®. Each volume provides a wealth of helpful information and beneficial descriptions of the many tasks the Jointer can perform.
SPECS: Hi-carbon tool steel, 7/8" (22.2mm) cutting area
Mer...
Redder dagen når en linje begynner å komme på villspor
Komfortabelt trehåndtak og herdet stålkutter gir deg full kontroll når du skal rette ut sjakklinjer som har gått ut av kurs. 60°-verktøyet er perfekt for nøyaktig å legge ut de kritiske, kryssende hovedlinjene. Gir riktig vinkel og grunn skjæredybde slik at 2- eller 3-kantsavstandsstykket passer nøyaktig til sporet. 90°-verktøyet fungerer utmerket for å skjerpe raden når mønsteret nærmer seg ferdigstillelse, og bringer linjene til full dybde. En skikkelig jobbredder. For å lære mer, les Monty Kennedys Checkering and Carving of Gunstocks og Bob Sconces fine checking-artikler i Gunsmith Kinks®. Hvert bind gir et vell av nyttig informasjon og nyttige beskrivelser av de mange oppgavene Jointer kan utføre.
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 1
Poor Quality Control(23.09.2017)
I've used Gunline tools for years and this tool was a disappointment. The teeth at the back of the cutting edge were improperly machined and did not have points. Instead the rear teeth were flat and squared off and could've ruined my work. Fortunately I tested it first and noticed the problem. I returned it to Brownell's who sent me a replacement. IT ALSO was improperly machined the same way. Someone is not checking their work. It's sad too since Gunline has been around forever. This 60 degree version should actually be more useful than the dembart 90 degree version since you should correct wavy lines early before they're pointed up, but, this tool won't do the job. If someone gets a good one please write a review
Produktnr.: 364000011 GUNLINE 60° JOINTER TOOL Produsentnr.: JT60818262100730 Komfortabelt trehåndtak og herdet stålkutter gir deg full kontroll når du skal rette ut sjakklinjer som har gått ut av kurs. 60°-verktøyet er perfekt for nøyaktig å legge ut de kritiske, kryssende hovedlinjene. Gir riktig vinkel og grunn skjæredybde slik at 2- eller 3-kantsavstandsstykket passer nøyaktig til sporet. 90°-verktøyet fungerer utmerket for å skjerpe raden når mønsteret nærmer seg ferdigstillelse, og bringer linjene til full dybde. En skikkelig jobbredder. For å lære mer, les Monty Kennedys Checkering and Carving of Gunstocks og Bob Sconces fine checking-artikler i Gunsmith Kinks®. Hvert bind gir et vell av nyttig informasjon og nyttige beskrivelser av de mange oppgavene Jointer kan utføre.
Comfortable wooden handle and hardened steel cutter give you complete control when you need to straighten out checkering lines which have gone off course. The 60° tool is perfect to accurately lay out the critical, intersecting, master lines. Gives the correct angle and shallow depth of cut so the 2 or 3 edge spacer will precisely fit the groove. The 90° tool works great to sharpen the row as the pattern nears completion, bringing the lines to full depth. A real job saver. To learn more, read Monty Kennedy's Checkering and Carving of Gunstocks and Bob Sconce's fine checkering articles in Gunsmith Kinks®. Each volume provides a wealth of helpful information and beneficial descriptions of the many tasks the Jointer can perform.
SPECS: Hi-carbon tool steel, 7/8" (22.2mm) cutting area
Mer...
Redder dagen når en linje begynner å komme på villspor
Komfortabelt trehåndtak og herdet stålkutter gir deg full kontroll når du skal rette ut sjakklinjer som har gått ut av kurs. 60°-verktøyet er perfekt for nøyaktig å legge ut de kritiske, kryssende hovedlinjene. Gir riktig vinkel og grunn skjæredybde slik at 2- eller 3-kantsavstandsstykket passer nøyaktig til sporet. 90°-verktøyet fungerer utmerket for å skjerpe raden når mønsteret nærmer seg ferdigstillelse, og bringer linjene til full dybde. En skikkelig jobbredder. For å lære mer, les Monty Kennedys Checkering and Carving of Gunstocks og Bob Sconces fine checking-artikler i Gunsmith Kinks®. Hvert bind gir et vell av nyttig informasjon og nyttige beskrivelser av de mange oppgavene Jointer kan utføre.
Antall vurderinger: 1
Fra brownells.com: 1
Gjennomsnittsvurdering: 1
Poor Quality Control(23.09.2017)
I've used Gunline tools for years and this tool was a disappointment. The teeth at the back of the cutting edge were improperly machined and did not have points. Instead the rear teeth were flat and squared off and could've ruined my work. Fortunately I tested it first and noticed the problem. I returned it to Brownell's who sent me a replacement. IT ALSO was improperly machined the same way. Someone is not checking their work. It's sad too since Gunline has been around forever. This 60 degree version should actually be more useful than the dembart 90 degree version since you should correct wavy lines early before they're pointed up, but, this tool won't do the job. If someone gets a good one please write a review