Auto-oversatt beskrivelse (Beskrivelse - Produsent): Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Mer...
Fills The Opening In Glock Frame For Smoother Reloading
Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glock® models 26/27/33/39. Other inserts fit the Glock® models indicated in the price lines below. Does not add extra rounds.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
SPECS: Impact-resistant plastic, black. One per pack.
Mer...
Fyller åpningen i glockramme for jevnere omlasting
Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
“GLOCK” er et føderalt registrert varemerke for Glock, Inc. og er et av mange varemerker som eies av Glock, Inc. eller Glock Ges.m.b.H. Brownells er en uavhengig forhandler av deler og tilbehør til Glock®-pistoler, og er ikke tilknyttet eller godkjent av Glock, Inc. eller Glock Ges.m.b.H. Bruken av Glock på denne siden er bare for å annonsere salg av Glock deler eller komponenter. Som angitt i produktbeskrivelsene er ikke alle deler og tilbehør på dette nettstedet offisielle Glock-produkter.
SPECS: Slagfast plast, svart. En per pakke.
Mer...
Kundevurderinger for Glock Gen 4/5 Grip Frame Insert, Mid & Full
Antall vurderinger: 19
Fra brownells.com: 19
Gjennomsnittsvurdering: 4,1
Perfect(28.10.2015)
Fits perfectly, tight, flush, nice color match. Gives a nice clean finished look..
Perfect fit in the 43.(15.04.2016)
Perfect fit in my 43. Brownells' needs to update indicating this is made to fit the 42 and 43.
Quality product(24.03.2012)
Perfect fit in my Gen 4 G34. Very impressed, matches the stock dimensions VERY well.
Perfect!(29.05.2012)
Perfect fit on my G17 Gen 4 and able to use the back straps. Glad I went with this and not the others I was looking at.
Made to fit(02.11.2013)
It fits so well you can't find the seam with your fingernail. Smooth mag well fit. Best four bucks you can spend on a Glock.
A Good Purchase (08.04.2015)
Given its low price, I'd recommend this insert to anyone who wants to plug that cavity (which likely is more of an aesthetic decision than a practical or tactical one) and still be able to employ the back straps. I use the large back strap along with this Pearce insert in my 17, and I'm very pleased with the overall results.
Best Grip Plug for you Gen 4 Glock(19.12.2016)
I have looked at different plugs for my Gen 4 Glock. This one is all in one. Meaning you can use different size grips. Most of the grips I have looked at you need to decide, small, medium or large. The Pearce Grip Plug is easy to install, looks good, one piece, and you can use it for all of the grips. Best plug for your buck.
Idiot proof(06.08.2010)
Slips in easy yet firm. Completes the look of the frame. No idea why Glock didnt do this in the first place!
Save your money(18.07.2013)
The only way to secure it in the grip of my 20sf would be super glue or a screw. There is no nub on the plug to click into the grip hole...so non secured it will just fall out. Poor product design.
G21SF plug falls out (12.09.2015)
The idea is good but . . .
This looked good and tight when installed but fell out on the third shot fired. reinserting it lasted only one more shot making this useless. The ones I've installed in my 19 and 26 work as advertised. However, without gluing as stated in the other review, it will not stay in the gun. That is just not acceptable.
Works great!(04.05.2016)
Not sure why some people are having issues with fitment or why this has a bad review rating. I have a Gen 3 Glock 21 SF and this insert fits nice and snug.
Great Piece Great Price(23.01.2010)
It does exactly what it says it will do. I cannot ask for much more.
Simple but effective(18.05.2011)
EASY to install and works as advertised, keeping dust, lint and debris out. Only down side would be that it prevents use of the lanyard hole, if you happen to need that...
Different from Picture(30.06.2011)
This specific one that's made for subcompact glock is friction fit, which means there's no tab to hold it in place like the one shown in the picture. (since there's no lanyard hole to begin with on this model of glock.) Further more, since it's friction fit, after a few shoots fired, it begins to slip out of it's socket. It's a unnecessary distraction especially in self defense situation. Product not recommended.
Insert for G-26 does not stay put.(29.12.2015)
I agree with the other 1 star comment that this insert does not stay in place for the subcompacts. I've lost a couple at the range and the last one bought only took five shots to come lose and drop off. I've reinstalled it with a few dabs of medium strength locktite and, maybe this will help keep it in place and still be removable when needed. We'll see.
Why not?(16.12.2009)
It's cheap, and is a good cosmetic enhancement, but not much else.
Works Awesome(13.06.2011)
Works as advertised.
Works Great(21.03.2015)
It snapped right into my Glock 22. Fills in that ugly hole in the frame. Keeps the dust out.
Will buy another for my Glock 20.
Pearce Grip Frame Insert(05.01.2016)
I always wondered why Glocks have that hole in the grip. This item filled the ugly hole in the grip and will help keep dust, dirt, and debris from getting into the gun.
092000022 Glock Gen 4/5 Grip Frame Insert, Mid & Full Produsentnr.: PGG4MF605849200071 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
Made in USA
US eksport klassifisering: I(h)
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
092000009 Glock Plus Zero Grip Frame Insert Produsentnr.: PGGFI605849200002 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
092000011 Subcompact Grip Frame Insert, Model 26/27/33/39 Produsentnr.: PGGFISC605849200019 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
092000014 Grip Frame Insert, Model 20/21 Short Produsentnr.: PGFI20SF605849200040 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
092000016 Subcompact Grip Frame Insert, Model 36 Produsentnr.: PGFI36605849200033 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
092000023 Glock Gen 4/5 Grip From Insert, Model 26/27/33 Produsentnr.: PGG4SC605849200064 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
092000030 Glock 42/43 Frame Insert Produsentnr.: PGFI42605849500089 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
092000031 Glock 20/21/40/41 Gen 4 Grip Frame Insert Produsentnr.: PGFI21G4605849200095 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
000005480 Glock® 30S/30SF/29SF (POST-2012) Grip Frame Insert Produsentnr.: PGFI30S605849200583 Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
Fills The Opening In Glock Frame For Smoother Reloading
Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glock® models 26/27/33/39. Other inserts fit the Glock® models indicated in the price lines below. Does not add extra rounds.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
SPECS: Impact-resistant plastic, black. One per pack.
Mer...
Fyller åpningen i glockramme for jevnere omlasting
Plastplugg installeres i nedre bakre hulrom på rammen for å fylle åpningen som finnes i Glock®-pistoler. Fremre “leppe” danner et tett, spylebånd med magebrønnen for å sørge for at magien går der den skal, jevnt. Holder skitt og rusk fra å finne veien inne i pistolen og gir et rent, glatt utseende. Bruker snorhullet for oppbevaring for å feste fast på plass. Glock® Plus Zero passer til modellene 17 til 25, 31, 32, 34, 35, 37 og 38. Gen 4 Grip Frame Inserts muliggjør bruk av fabrikkens utskiftbare bakreimer. Gen 4 Full & Mid-modell passer til Generation 4 Glock®-modeller 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact-modell passer til Generation 4 Glock®-modeller 26/27/33/39. Andre innlegg passer til Glock®-modellene som er angitt i prislinjene nedenfor. Legger ikke ekstra runder.
“GLOCK” er et føderalt registrert varemerke for Glock, Inc. og er et av mange varemerker som eies av Glock, Inc. eller Glock Ges.m.b.H. Brownells er en uavhengig forhandler av deler og tilbehør til Glock®-pistoler, og er ikke tilknyttet eller godkjent av Glock, Inc. eller Glock Ges.m.b.H. Bruken av Glock på denne siden er bare for å annonsere salg av Glock deler eller komponenter. Som angitt i produktbeskrivelsene er ikke alle deler og tilbehør på dette nettstedet offisielle Glock-produkter.
SPECS: Slagfast plast, svart. En per pakke.
Mer...
Kundevurderinger for Glock Gen 4/5 Grip Frame Insert, Mid & Full
Antall vurderinger: 19
Fra brownells.com: 19
Gjennomsnittsvurdering: 4,1
Perfect(28.10.2015)
Fits perfectly, tight, flush, nice color match. Gives a nice clean finished look..
Perfect fit in the 43.(15.04.2016)
Perfect fit in my 43. Brownells' needs to update indicating this is made to fit the 42 and 43.
Quality product(24.03.2012)
Perfect fit in my Gen 4 G34. Very impressed, matches the stock dimensions VERY well.
Perfect!(29.05.2012)
Perfect fit on my G17 Gen 4 and able to use the back straps. Glad I went with this and not the others I was looking at.
Made to fit(02.11.2013)
It fits so well you can't find the seam with your fingernail. Smooth mag well fit. Best four bucks you can spend on a Glock.
A Good Purchase (08.04.2015)
Given its low price, I'd recommend this insert to anyone who wants to plug that cavity (which likely is more of an aesthetic decision than a practical or tactical one) and still be able to employ the back straps. I use the large back strap along with this Pearce insert in my 17, and I'm very pleased with the overall results.
Best Grip Plug for you Gen 4 Glock(19.12.2016)
I have looked at different plugs for my Gen 4 Glock. This one is all in one. Meaning you can use different size grips. Most of the grips I have looked at you need to decide, small, medium or large. The Pearce Grip Plug is easy to install, looks good, one piece, and you can use it for all of the grips. Best plug for your buck.
Idiot proof(06.08.2010)
Slips in easy yet firm. Completes the look of the frame. No idea why Glock didnt do this in the first place!
Save your money(18.07.2013)
The only way to secure it in the grip of my 20sf would be super glue or a screw. There is no nub on the plug to click into the grip hole...so non secured it will just fall out. Poor product design.
G21SF plug falls out (12.09.2015)
The idea is good but . . .
This looked good and tight when installed but fell out on the third shot fired. reinserting it lasted only one more shot making this useless. The ones I've installed in my 19 and 26 work as advertised. However, without gluing as stated in the other review, it will not stay in the gun. That is just not acceptable.
Works great!(04.05.2016)
Not sure why some people are having issues with fitment or why this has a bad review rating. I have a Gen 3 Glock 21 SF and this insert fits nice and snug.
Great Piece Great Price(23.01.2010)
It does exactly what it says it will do. I cannot ask for much more.
Simple but effective(18.05.2011)
EASY to install and works as advertised, keeping dust, lint and debris out. Only down side would be that it prevents use of the lanyard hole, if you happen to need that...
Different from Picture(30.06.2011)
This specific one that's made for subcompact glock is friction fit, which means there's no tab to hold it in place like the one shown in the picture. (since there's no lanyard hole to begin with on this model of glock.) Further more, since it's friction fit, after a few shoots fired, it begins to slip out of it's socket. It's a unnecessary distraction especially in self defense situation. Product not recommended.
Insert for G-26 does not stay put.(29.12.2015)
I agree with the other 1 star comment that this insert does not stay in place for the subcompacts. I've lost a couple at the range and the last one bought only took five shots to come lose and drop off. I've reinstalled it with a few dabs of medium strength locktite and, maybe this will help keep it in place and still be removable when needed. We'll see.
Why not?(16.12.2009)
It's cheap, and is a good cosmetic enhancement, but not much else.
Works Awesome(13.06.2011)
Works as advertised.
Works Great(21.03.2015)
It snapped right into my Glock 22. Fills in that ugly hole in the frame. Keeps the dust out.
Will buy another for my Glock 20.
Pearce Grip Frame Insert(05.01.2016)
I always wondered why Glocks have that hole in the grip. This item filled the ugly hole in the grip and will help keep dust, dirt, and debris from getting into the gun.