Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS ENGINE TURNING KIT


Deluxe Engine Turning Kit

Auto-oversatt beskrivelse (Beskrivelse - Produsent): To penger lagring kits som har alt nødvendig for å produsere en attraktiv, juvelen finish på hammere, utløsere, rifle bolter, etc. Velg settet som best dekker dine behov og spare tid og kostnader å kjøpe individuelle stykker. Den Standard Kit inneholder to vår E/T pensel sett og en beholder med 120 grus silisiumkarbid slipende; Deluxe pakken legger vår E/T pensel Holder forsamling som gir akkurat den rette mengden Penseltrykk mot arbeidsstykket. Mer...

Produktnr.: 080558101
Save & Get Everything You Need
Two money saving kits that have everything needed to produce an attractive, jeweled finish on hammers, triggers, rifle bolts, etc. Select the kit that best meets your needs and save the time and cost of buying individual pieces. The Standard Kit contains two of our E/T Brush sets and a container of 120 grit silicon carbide abrasive; the Deluxe Kit adds our E/T Brush Holder Assembly that gives just the right amount of brush pressure against the work piece. Use the Standard Kit if you primarily work on flat surfaces. The Deluxe Kit produces a great finish on flat or curved surfaces. To get the best results, the kits should be used in a drill press.
SPECS: Each kit contains twelve E/T brushes, 24 O-rings, two 4" lengths of heat shrink tubing, one 4 oz. container 120 grit Silicon Carbide Abrasive, a 1 oz. bottle of Do-Drill and complete instructions. The deluxe Kit adds the E/T Brush Holder.
BROWNELLS
080558101
Deluxe Engine Turning Kit
kr 1 373,00 *

På lager



080558100
Standard Engine Turning Kit
kr 798,00 *

På lager
Save & Get Everything You Need
Two money saving kits that have everything needed to produce an attractive, jeweled finish on hammers, triggers, rifle bolts, etc. Select the kit that best meets your needs and save the time and cost of buying individual pieces. The Standard Kit contains two of our E/T Brush sets and a container of 120 grit silicon carbide abrasive; the Deluxe Kit adds our E/T Brush Holder Assembly that gives just the right amount of brush pressure against the work piece. Use the Standard Kit if you primarily work on flat surfaces. The Deluxe Kit produces a great finish on flat or curved surfaces. To get the best results, the kits should be used in a drill press.
SPECS: Each kit contains twelve E/T brushes, 24 O-rings, two 4" lengths of heat shrink tubing, one 4 oz. container 120 grit Silicon Carbide Abrasive, a 1 oz. bottle of Do-Drill and complete instructions. The deluxe Kit adds the E/T Brush Holder.