Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
Enkel montering av Trijicon RMR på din RUGER SR9, SR40, SR45
Med vår EGW Sight Mount kan du enkelt bytte ut bakre sikte på din pistol for å montere Trijicon RMR rødpunktsikte. Følg instruksjonene nedenfor for en problemfri installasjon.
Produktbeskrivelse
- Fjern det bakre siktet*
- Installer EGW Sight Mount i dovetail
- Dra til settskruen (hvis aktuelt)
- Plasser rødpunktsiktet på EGW Sight Mount (legg et lite papir mellom rødpunktsiktet og siktemonteringen for enklere fjerning og for å unngå Loctite på rødpunktsiktet.)
- Påfør blå Loctite på de medfølgende monteringsskruene
- Dra til monteringsskruene til 15in/lbs
Skruene som følger med denne monteringen krever en 5/64'' allen-nøkkel for installasjon.
* Vennligst merk at bakre sikte må fjernes før installasjon.