The DDM4 V9 AR15 style rifle is designed to satisfy the needs of modern shooters, not only in popular shooting sports, but also for tactical and defensive applications. The long, 15 inch picatinny quad rail over a 16 inch Cold Hammer Forged barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely, and preventing over travel when transitioning between multiple targets. This combined with our mid-length gas system, which is known to have a smoother recoil impulse, allows for quick but precise rapid fire. The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip. FEATURES: LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 16" Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense DDM4 Rail 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding GRIP: Daniel Defense Vertical Grip, Glass Filled Polymer with Soft Touch Overmolding RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F. Made in the USA! SPECIFICATIONS: Mounting System - Picatinny Caliber - 5.56mm NATO Muzzle Thread - 1 ⁄ 2 × 28 TPI (Threads Per Inch) Gas System - Mid-length Barrel Length - 16" Barrel Profile - Government Product Weight - 6.59 lbs Length - 32 1/4" – 35 7/8” Magazine - DD Magazine with 32-round capacity in the same size magazine as industry-standard 30-round magazines Case - Daniel Defense Full-Latch Impact Plastic Case
DDM4 V9 – En semi-automatisk rifle for moderne skyting
DDM4 V9 AR15-stil riflen er designet for å tilfredsstille behovene til moderne skyttere, både innen populære skytesporter og for taktiske og defensive applikasjoner. Den lange, 15 tommer picatinny quad railen over en 16 tommers Cold Hammer Forged løp gir operatøren muligheten til å ha støttehånden strukket ut nær munningspunktet, noe som gjør det lettere å styre våpenet mer presist og forhindrer overbevegelse når man skifter mellom flere mål.
Funksjoner
- UNDER RECEIVER: Mil-Spec med forbedret flared magazine well og bakre receiver QD swivel festepunkt. CNC-maskinert av 7075-T6 aluminium, Type III hard anodisert.
- OVER RECEIVER: Mil-Spec med indekseringsmerker og M4 materramp. CNC-maskinert av 7075-T6 aluminium, Type III hard anodisert.
- LØP: Chrome Moly Vanadium stål, Cold Hammer Forged, 1:7 twist, 16" government profil, chrome lined, Mil-Spec heavy phosphate coated, og HP/MPI testet.
- GASSYSTEM: Pinned low profile gas block CNC-maskinert av 4140 hardened steel og Mil-Spec heavy phosphate coating, mid-length, direct impingement.
- MUZZLE DEVICE: Daniel Defense flash suppressor, 17-4 PH rustfritt stål, saltbad nitride finish.
- BOLT CARRIER GROUP: M16 profil, Mil-Spec MP testet, chrome lined, korrekt staked gas key.
- BUFFER: H Buffer.
- SIGHTS: Selges separat.
- HANDGUARD: Daniel Defense DDM4 Rail 15.0, CNC-maskinert av 6061-T6 aluminium, Type III hard anodisert.
- CHARGING HANDLE: GRIP-N-RIP charging handle, kroppen CNC-maskinert av 7075-T6 aluminium, håndtak og latch CNC-maskinert av 6061-T6 aluminium, heavy duty rustfritt stål rullpinner, Type III hard anodisert.
- RECEIVER EXTENSION: 6 posisjon Mil-Spec 7075-T6 aluminium.
- BUTTSTOCK: Daniel Defense buttstock, glassfylt polymer med soft touch overmolding.
- PISTOL GRIP: Daniel Defense pistol grip, glassfylt polymer med soft touch overmolding.
- GRIP: Daniel Defense vertikal grip, glassfylt polymer med soft touch overmolding.
- RAIL PANELS: Daniel Defense rail panels laget av Santoprene, varmebestandig opp til 300° F.
Produsert i USA!
Spesifikasjoner
- Monteringssystem: Picatinny
- Kaliber: 5.56mm NATO
- Muzzle Thread: 1 ⁄ 2 × 28 TPI (tråder per tomme)
- Gassystem: Mid-length
- Løpslengde: 16"
- Løpsprofil: Government
- Produktvekt: 6.59 lbs
- Lengde: 32 1/4" – 35 7/8”
- Magasin: DD magasin med 32-runders kapasitet i samme størrelse som bransjestandard 30-runders magasiner
- Case: Daniel Defense Full-Latch Impact Plastic Case
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning