The DDM4 V7 PRO AR15 style firearm is for competitors looking to dominate podiums in today's popular multi-gun matches. Built around our 18 inch Cold Hammer Forged barrel, this platform delivers the speed, controllability, and precision required to engage the most difficult multi-gun stages. The V7 PRO comes standard with the MFR 15.0 M-LOK rail, which offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. An uninterrupted Picatinny rail on top and M-LOK attachment points ensure plenty of real estate for optics and accessories and allow for the maximum sight radius for accurate shooting with rail mounted iron sights. Its muzzle device, the Muzzle Climb Mitigator, redirects propellant gasses through calibrated ports, countering both recoil and muzzle climb. A Geissele Automatics Super Dynamic 3 Gun Trigger delivers rapid hits on target with its light, short pull and quick reset. Combined with the softened recoil impulse of a rifle-length gas system, this allows for shorter split times, more precise follow-up shots, and reduced fatigue. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip. MATERIALS & CONSTRUCTION LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized TRIGGER: Geissele Automatics Super Dynamic 3-Gun Trigger BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 18"" S2W Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement MUZZLE DEVICE: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding Made in the USA!
Oppdag DDM4 V7 PRO - Den ultimate konkurransegeværet!
DDM4 V7 PRO AR15-stil geværet er designet for konkurrenter som ønsker å dominere podiene i dagens populære multi-gun matcher. Bygget rundt vår 18 tommers Cold Hammer Forged løp, leverer denne plattformen hastighet, kontroll og presisjon som kreves for å takle de mest utfordrende multi-gun scenene.
Funksjoner og spesifikasjoner
V7 PRO leveres som standard med MFR 15.0 M-LOK rail, som tilbyr utrolig vektbesparelse samt overlegen kjøling, ergonomi og modularitet, samtidig som den opprettholder styrken og holdbarheten forventet fra Daniel Defense.
- Uavbrutt Picatinny rail på toppen og M-LOK feste punkter gir rikelig med plass for optikk og tilbehør, og tillater maksimal sikte radius for nøyaktig skyting med rail-monterte jern sikter.
- Muzzle Climb Mitigator: Denne munnstykket omdirigerer drivgasser gjennom kalibrerte porter, som motvirker både rekyl og munnklatring.
- Geissele Automatics Super Dynamic 3 Gun Trigger: Leverer raske treff på mål med sitt lette, korte trekk og raske tilbakestilling.
- Ergonomisk GRIP-N-RIP Charging Handle: Tilpasser seg både venstre- og høyrehendte skyttere.
Materialer og konstruksjon
- Lower Receiver: Mil-Spec med Enhanced Flared Magazine Well og Rear Receiver QD Swivel Attachment Point. CNC-maskinert av 7075-T6 Aluminium, Type III Hard Coat Anodized.
- Upper Receiver: Mil-Spec med indekseringsmerker og M4 Feed Ramps. CNC-maskinert av 7075-T6 Aluminium, Type III Hard Coat Anodized.
- Barrel: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 18" S2W Profil, Chrome Lined, Mil-Spec Heavy Phosphate Coated, og HP/MPI Testet.
- Gas System: Pinned Low Profile Gas Block CNC-maskinert av 4140 Hardened Steel og Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement.
- Muzzle Device: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Rustfritt Stål, Salt Bath Nitride Finished.
- Buffer: H Buffer.
- Handguard: Daniel Defense MFR 15.0, CNC-maskinert av 6061-T6 Aluminium, Type III Hard Coat Anodized.
- Buttstock: Daniel Defense Buttstock, Glass Filled Polymer med Soft Touch Overmolding.
- Pistol Grip: Daniel Defense Pistol Grip, Glass Filled Polymer med Soft Touch Overmolding.
Produsert i USA!
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning