Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
CZ 557 SHORT ACTION HD PICATINNY SCOPE MOUNT

841370115723 296000760
This mount is made specifically for the CZ 557 Short Action. Please check your ejection port opening to make sure this mount will correctly fit. The opening measures 2.675"". EGW has had some rifles with longer ejection ports that are short action. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Recommend: 0 MOA -if shooting 0-500 yards 20 MOA -if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
1749 1749 2 NOK
Produktnr.: 296000760
EGW CZ 557 SA 1-PIECE PICATINNY BASE 0 MOA
Produsentnr.: 80924 841370115723 Dette festet er spesifikt laget for CZ 557 Short Action. Vennligst sjekk åpningen av utkasterporten for å forsikre deg om at dette festet passer korrekt. Åpningen måler 2.675"". EGW har hatt noen rifler med lengre utkasterporter som er short action. Picatinny tverrslisser løper hele lengden av skinnen, noe som gir skytteren fleksibilitet når de monterer kikkertsikteringer og andre tilbehør. EGWs ettstykkemonteringer for kikkertsikter er det opplagte valget for jegere og taktiske skyttere. Dette festet er en Picatinny-stil base og kompatibel med Picatinny eller Weaver kikkertsikteringer. EGW maskinerer disse i sitt verksted ved hjelp av et av deres bearbeidingssentre. Etter maskinering blir festene tumblerbehandlet, sandblåst og Type III anodisert for langvarig holdbarhet. Anbefaler: 0 MOA - hvis du skyter 0-500 yards 20 MOA - hvis du skyter 500-1000 yards Når du sikter inn riflen din med et 20 MOA feste, anbefaler EGW å sikte inn på 200 yards. Installasjon: EGW anbefaler 20 inch lbs moment og en dråpe blå loctite (loctite selges separat). Hele festet og tilbehøret (fra monteringsskruene og nøkkelen ned til emballasjen) er laget i USA.
1749 NOK 3 kr 1 749,00 *
Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA
Spesifikasjoner: Elevation: 0 MOA Farge: Black Make: CZ Material: Aluminum Number of Bases: 1-Piece Style: Picatinny Rail Type låskasse: Short

Attributes

Action Type: Short Elevation: 0 MOA Farge: Black Make: CZ Material: Aluminum Number of Bases: 1-Piece Style: Picatinny Rail Leveringsvekt: 0,136kg Frakthøyde: 25mm Fraktbredde: 89mm Fraktlengde: 229mm

Elementdetaljer

Made in USA



Produktnr.: 296000761
EGW CZ 557 SA 1-PIECE PICATINNY BASE 20 MOA
Produsentnr.: 80926 841370115730 Dette festet er spesifikt laget for CZ 557 Short Action. Vennligst sjekk åpningen av utkasterporten for å forsikre deg om at dette festet passer korrekt. Åpningen måler 2.675"". EGW har hatt noen rifler med lengre utkasterporter som er short action. Picatinny tverrslisser løper hele lengden av skinnen, noe som gir skytteren fleksibilitet når de monterer kikkertsikteringer og andre tilbehør. EGWs ettstykkemonteringer for kikkertsikter er det opplagte valget for jegere og taktiske skyttere. Dette festet er en Picatinny-stil base og kompatibel med Picatinny eller Weaver kikkertsikteringer. EGW maskinerer disse i sitt verksted ved hjelp av et av deres bearbeidingssentre. Etter maskinering blir festene tumblerbehandlet, sandblåst og Type III anodisert for langvarig holdbarhet. Anbefaler: 0 MOA - hvis du skyter 0-500 yards 20 MOA - hvis du skyter 500-1000 yards Når du sikter inn riflen din med et 20 MOA feste, anbefaler EGW å sikte inn på 200 yards. Installasjon: EGW anbefaler 20 inch lbs moment og en dråpe blå loctite (loctite selges separat). Hele festet og tilbehøret (fra monteringsskruene og nøkkelen ned til emballasjen) er laget i USA.
1749 NOK 2 kr 1 749,00 *
Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA
Spesifikasjoner: Elevation: 20 MOA Farge: Black Make: CZ Material: Aluminum Number of Bases: 1-Piece Style: Picatinny Rail Type låskasse: Short
This mount is made specifically for the CZ 557 Short Action. Please check your ejection port opening to make sure this mount will correctly fit. The opening measures 2.675"". EGW has had some rifles with longer ejection ports that are short action. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Recommend: 0 MOA -if shooting 0-500 yards 20 MOA -if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Nyhetsbrev