Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

EGW
CZ 457 11MM HD PICATINNY SCOPE MOUNT

841370112111 296000764
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Recommend: 0 MOA -if shooting 0-500 yards 20 MOA -if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
1749 1749 2 NOK
Produktnr.: 296000764
EGW CZ 457 11MM 1-PIECE PICATINNY BASE 0 MOA
Produsentnr.: 80930 841370112111 Picatinny-skinner går i full lengde av skinnen, noe som gir skytteren fleksibilitet når det gjelder montering av kikkertsikteringer og andre tilbehør. EGW ett-stykkers montasjer er det opplagte valget for jegere og taktiske skyttere. Denne monteringen er en Picatinny-stil base og er kompatibel med Picatinny eller Weaver kikkertsikteringer. EGW maskinerer disse i sitt verksted ved hjelp av en av deres maskineringssentre. Etter maskinering blir montasjene tromlet, sandblåst og Type III anodisert for langvarig holdbarhet. Anbefales: 0 MOA - hvis du skyter 0-500 yards 20 MOA - hvis du skyter 500-1000 yards Når du nullstiller riflen din med en 20 MOA montering, anbefaler EGW nullstilling på 200 yards. Installasjon: EGW anbefaler 20 tommers lbs av dreiemoment og en dråpe blå loctite (loctite selges separat). Hele monteringen og tilbehør (fra monteringsskruene og nøkkelen ned til emballasjen) er laget i USA.
1749 NOK 5 kr 1 749,00 *
Leveringstid ca. 14-21 dager.
5 stk. på lageret i USA
Spesifikasjoner: Elevation: 0 MOA Farge: Black Make: CZ Material: Aluminum Modell: 457 Number of Bases: 1-Piece Style: Picatinny Rail

Attributes

Elevation: 0 MOA Farge: Black Make: CZ Material: Aluminum Modell: 457 Number of Bases: 1-Piece Style: Picatinny Rail Leveringsvekt: 0,154kg Frakthøyde: 38mm Fraktbredde: 89mm Fraktlengde: 229mm

Elementdetaljer

Made in USA



Produktnr.: 296000765
EGW CZ 457 11MM 1-PIECE PICATINNY BASE 20 MOA
Produsentnr.: 80932 841370112128 Picatinny-skinner går i full lengde av skinnen, noe som gir skytteren fleksibilitet når det gjelder montering av kikkertsikteringer og andre tilbehør. EGW ett-stykkers montasjer er det opplagte valget for jegere og taktiske skyttere. Denne monteringen er en Picatinny-stil base og er kompatibel med Picatinny eller Weaver kikkertsikteringer. EGW maskinerer disse i sitt verksted ved hjelp av en av deres maskineringssentre. Etter maskinering blir montasjene tromlet, sandblåst og Type III anodisert for langvarig holdbarhet. Anbefales: 0 MOA - hvis du skyter 0-500 yards 20 MOA - hvis du skyter 500-1000 yards Når du nullstiller riflen din med en 20 MOA montering, anbefaler EGW nullstilling på 200 yards. Installasjon: EGW anbefaler 20 tommers lbs av dreiemoment og en dråpe blå loctite (loctite selges separat). Hele monteringen og tilbehør (fra monteringsskruene og nøkkelen ned til emballasjen) er laget i USA.
1749 NOK 3 kr 1 749,00 *
Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA
Spesifikasjoner: Elevation: 20 MOA Farge: Black Make: CZ Material: Aluminum Modell: 457 Number of Bases: 1-Piece Style: Picatinny Rail
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Recommend: 0 MOA -if shooting 0-500 yards 20 MOA -if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Nyhetsbrev