Complete Upper Assembly for Upgrading Your Factory G17 or a Custom Build Top off your next custom pistol build or upgrade with our Complete RMR Slide Assembly for Glock® 17 Gen3, available in three configurations. You can get your slide with a premium match-quality barrel, a ½"-28 tpi threaded barrel to accept a sound suppressor, or with a ported barrel that vents through a window in the top of the slide to counteract muzzle rise and help you keep the sights on the target for subsequent shots. This eliminates the need to install a bulky compensator on the muzzle, which means your new comped pistol will still fit standard holsters for the Glock® 17. These slides come fully assembled with the barrel and all the internal small parts installed, making this RMR Slide the ideal upgrade for your factory Glock® 17 Gen3 pistol or the perfect "top half" for a brand-new custom gun built on a compatible frame from another manufacturer. It features a pre-cut slot for easy, secure, low-profile mounting of a reflex red dot sight that fits the Trijicon RMR footprint. If you're not mounting a red dot at the moment, we've included a lightweight reinforced polymer cover plate to neatly fill the slot. Our RMR Slide comes with standard-height front and rear sights, which can serve as your primaries or a backup "iron" sights when paired with a red dot sight. Comes COMPLETE with barrel, front & rear sights, and small parts installed Fits Gen3 Glock® 17 pistols & clones Built-in mounting slot for reflex sights with the Trijicon RMR footprint Optic slot cover plate & recoil spring assembly also included Slide machined from 416 stainless steel billet, with a Black Nitride finish Choice of Solid top slide with standard barrel or ½"-28 tpi threaded barrel, OR distinctive top Window slide with ported/compensated barrel Each RMR Slide for Glock® starts life as a billet of 416 stainless steel that is machined to Glock® factory specifications inside, with a tough, extremely wear-resistant black Nitride finish. This slide fits standard Glock® factory G17 frames and compatible aftermarket frames. The match-quality barrel is machined from premium 416R stainless steel alloy. The muzzle of the threaded barrel has standard ½"-28 tpi threads. The ported barrel has eight ports angled to provide just the right counterforce to muzzle rise. On the sides at the rear, you'll find distinctive wide, shallow cocking serrations that give excellent "purchase" to rack the slide, plus a mirrored set of serrations up front that aid in manipulating the slide to press-check the chamber. Both sets of serrations make it easy to manipulate your pistol's slide from any angle and in any position. Hey, we have to admit these serrations just look very cool, too! Whether you're assembling a custom pistol to meet specific needs, or you're upgrading a factory Glock 17 for enhanced performance and versatility, a Brownells complete slide assembly is helps you complete your project quickly and easily! Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
Oppgrader din Glock 17 med vår komplette slide-assemblies!
Vår komplette RMR slide-assembly for Glock® 17 Gen3 er tilgjengelig i tre konfigurasjoner, perfekt for å toppe opp din neste tilpassede pistolbygging eller oppgradering. Med mulighet for premium match-kvalitetsløp, en ½"-28 tpi threaded barrel for lyddemper, eller et portet løp som ventilerer gjennom et vindu i toppen av sliden, kan du motvirke løpetopp og holde siktene på målet for påfølgende skudd.
Produktegenskaper:
- Komplett med løp, front- og bak-sikter, og smådeler installert.
- Passer til Gen3 Glock® 17-pistoler og kloner.
- Innebygd monteringsspor for reflex-sikter med Trijicon RMR fotavtrykk.
- Optisk spor dekselplate og rekylfjærmontering inkludert.
- Slide maskinert fra 416 rustfritt stål, med en Black Nitride finish.
- Valg mellom solid topp slide med standard løp eller ½"-28 tpi threaded barrel, ELLER distinkt topp Window slide med ported/kompensert løp.
Hver RMR slide for Glock® starter som en billet av 416 rustfritt stål som er maskinert til Glock® fabrikkspesifikasjoner, med en slitesterk black Nitride finish. Løpet av match-kvalitet er maskinert fra premium 416R rustfritt stål legering, og den threaded barrel har standard ½"-28 tpi gjenger. Det portede løpet har åtte porter vinklet for å gi akkurat den rette motkraften til løpetopp.
Bak på siden finner du distinkte brede, grunne cocking serrations som gir utmerket grep for å trekke sliden, pluss et speilvendt sett med serrations foran som hjelper med å manipulere sliden for å sjekke kammeret. Begge sett med serrations gjør det enkelt å manipulere pistolens slide fra enhver vinkel og i enhver posisjon.
Enten du setter sammen en tilpasset pistol for spesifikke behov, eller oppgraderer en fabrikk Glock 17 for forbedret ytelse og allsidighet, hjelper en Brownells komplett slide-assembly deg med å fullføre prosjektet raskt og enkelt!
Brownells Gun Tech™ Notat: Kanalforing kreves for disse slidene. Kanalforing er en press-passform og krever et verktøy for installasjon. Vi anbefaler #777-100-017.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning