The KIDD .22LR Classic Receiver is an aftermarket receiver. It is a slip-fit design with industry standard dimensions. The Classic is designed with the easy access rear cleaning hole and a proprietary interchangeable low scope base with varying minute of angle (MOA) available. Zero MOA is great for 50 yards and under 20 MOA is helpful for 150 yards and over. It is designed to drop into a stock inletted for the 10/22 without any modification. This receiver is milled out from 6061 T6 aluminum and anodized either black or clear. Recommend using a KIDD trigger with a KIDD receiver. KIDD has provided the option to build this receiver with receiver pins, bolt buffer, or rear tang if desired. The receiver is machined to utilize their threaded receiver pins. The KIDD upgraded bolt buffer will cushion the felt recoil of the bolt. The optional rear tang will increase your stability of the rifle but require some custom inletting to your stock. (See rear tang installation instruction below) We also have the additional option of a second scope base due to the interchangeable nature of this base you may want to purchase two. So, for instance, if you were going to change from shooting 25 yards to 150 yards and your scope needed some help with that adjustment, you could switch out the base. Both the scope base and rear tangs have mating designs to the receiver so that the rifles have great rigidity as well as some customization aspects. FEATURES: 10/22 style aftermarket slip fit receiver Durable anodized finish Billet aluminum Rear access cleaning hole Optional v-block, rear tang, take down screw, bolt buffer, and pins Specialized interchangeable scope base Receiver comes standard with Zero scope base installed You must be 21 or older to purchase this product as this is an FFL Product. Rear tang installation instructions: Tool: 1/2"" bit After measuring part give (+) .030 on the Z axis and (+) .005 on the X and Y.
KIDD .22LR Classic Receiver - Perfeksjon for din rifle
KIDD .22LR Classic Receiver er en ettermarkedsreceiver designet for å passe perfekt til din 10/22 rifle. Denne receiveren har et slip-fit design med bransjestandard dimensjoner, noe som gjør installasjonen enkel og problemfri.
Egenskaper:
- 10/22 stil ettermarkeds slip-fit receiver
- Slitesterk anodisert finish
- Billet aluminium
- Bakre tilgang for rengjøringshull
- Valgfri v-block, bakre tang, skruer for demontering, boltbuffer og pinner
- Spesialisert utskiftbar kikkertsiktemontasje
- Receiveren leveres standard med Zero kikkertsiktemontasje installert
Den klassiske receiveren er designet med et enkelt tilgangshull for rengjøring og en proprietær utskiftbar lav kikkertsiktemontasje med varierende minute of angle (MOA). Zero MOA er perfekt for 50 yards og under, mens 20 MOA er nyttig for 150 yards og over. Receiveren er maskinert fra 6061 T6 aluminium og anodisert enten svart eller klar.
Vi anbefaler å bruke en KIDD-trigger med KIDD-receiveren for optimal ytelse. KIDD gir deg også muligheten til å bygge denne receiveren med receiverpinner, boltbuffer eller bakre tang hvis ønskelig. Den oppgraderte boltbufferen fra KIDD vil dempe følt rekyl fra bolten, og den valgfri bakre tangen vil øke stabiliteten til riflen, men krever noe tilpasset innfelling i stokken din.
Merk at du må være 21 år eller eldre for å kjøpe dette produktet, da det er et FFL-produkt.
Installasjonsinstruksjoner for bakre tang:
- Verktøy: 1/2" bor
- Etter å ha målt delen, legg til (+) .030 på Z-aksen og (+) .005 på X- og Y-aksen.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning