Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BROWNELLS
CHECKERING CRADLE

050806104105 080026000
Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
SPECS: 41½" (105cm) long, 8¼" (21cm) high, 1½" (3.8cm) wide.
2449 2449 1 NOK
Produktnr.: 080026000
BROWNELLS CHECKERING CRADLE
Produsentnr.: 080026000 050806104105 En sjakkelvugge gjør rillearbeidet så mye enklere - og resultatene så mye bedre - at vi aldri har møtt en profesjonell kolbemaker som ikke brukte en sjakkelvugge! To av de viktigste fordelene med en god sjakkelvugge er: 1) Den lar deg jobbe med begge hender og rotere kolben mens du lager riller på mønsteret, og holder arbeidsområdet i den mest komfortable og kontrollerte posisjonen. Dette eliminerer den klønete og vanskelige oppgaven med å prøve å arbeide rundt en stasjonær kolbe - noen ganger nesten til det punktet hvor du står på hodet - og følger mønsteret korrekt fra kant til kant. 2) Forhindrer frem og tilbake-voblingen som ødelegger skjærehandlingen til rilleverktøyene. Hvis kolben ikke er sikkert festet, vil den bevege seg med kutteren. Denne bevegelsen lar kutteren gripe kolben og gjør det nesten umulig å kutte rette, jevne linjer med ensartet dybde. Enkel i design, lav i pris, av robust trekonstruksjon og svært praktisk. Justerbar for å holde riflekolber opptil 33" lange (som vil inkludere alle kolber unntatt Mannlicher-stil) og alle haglegeværkolber og forskjefter. Holder kolben stivt, uten å skade finishen, men tillater dreining av kolben ettersom arbeidet skrider frem. Praktisk også for innfelling av kolbe, sliping, beising og etterbehandling. Bolt direkte til benken, eller lås fast i en solid skrustikke. Leveres komplett med alle holdere, bolter og instruksjoner.
2449 NOK 3 kr 2 449,00 *
Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA

Attributes

Leveringsvekt: 2,722kg Frakthøyde: 81mm Fraktbredde: 171mm Fraktlengde: 1 067mm

Elementdetaljer

Made in USA



Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
SPECS: 41½" (105cm) long, 8¼" (21cm) high, 1½" (3.8cm) wide.
Nyhetsbrev