Din handlekurv er tom.

Handlekurv

37 17 00 00

fraktprisen_topp_970_50

RIMFIRE GUNWORKS CHANNEL LINER TOOL for GLOCK®

Auto-oversatt beskrivelse (Beskrivelse - Produsent): Det samme verktøyet brukes på Glock fabrikken å presist fjerne og installere tennål kanal duken. Dette disponibel delen, i lysbildet må fjernes og en ny installert, når rebluing eller refinishing Glock lysbilder. Mer...

777100017

Removes & Installs The Liner, Without Slide Damage

The same tool used at the Glock Factory to accurately remove and install the firing pin channel liner. This disposable part, inside the slide, must be removed and a new one installed, when rebluing or refinishing Glock Slides. Easy-to-use tool will not damage or mark the slide. Includes complete instructions, a thread protector, plus one channel liner.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

SPECS: Steel, blue. 6" (15cm) long. Fits all models of Glock pistols.

Mer...

Fjerner & installerer duken, uten lysbildet skade

Det samme verktøyet brukes på Glock fabrikken å presist fjerne og installere tennål kanal duken. Dette disponibel delen, i lysbildet må fjernes og en ny installert, når rebluing eller refinishing Glock lysbilder. Lett-å-bruk verktøyet vil ikke skade eller merke lysbildet. Inneholder instruksjoner, en tråd beskytter, pluss en kanal liner.

"GLOCK" er en federally registrert varemerke Glock, Inc. og er en av mange varemerker eid av Glock, Inc. eller Glock Ges.m.b.H. Brownells er en selvstendig forhandler av reservedeler og tilbehør ® for Glock pistoler, og er ikke tilknyttet eller godkjent av Glock, Inc. eller Glock Ges.m.b.H. Bruk av Glock på denne siden er bare annonsere salg av Glock deler eller komponenter. som indikert i produktbeskrivelser , ikke alle deler og tilbehør er offisielle Glock produkter.

Spesifikasjoner: stål, blå. 6"(15cm) lang. Passer alle modeller av Glock pistoler.

Mer...

Kundevurderinger for Channel Liner Tool for GLOCK

Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 4,5

Handy tool, makes the job easier (15.09.2009)

Handy tool for removing the channel liner. Simple design and simple function. However, it ruins the old one and it must be replaced with a new one every time. Better than digging it out with a screwdriver or other improvised tool.

Excellent channel liner tool! (01.01.2018)

Excellent quality and precision made with an exact fit. This works great for installing and removing the liner. Most other tools just install the liner...to remove the liner, you would need a lag bolt or some other tool which could scratch or damage the slide.

Slick Tool (07.03.2018)

This is a brilliantly designed, easy-to-use tool, but the designer made one bad assumption about removing the channel liner. He/she assumed that the channel liner would be intact. In all fairness, so would have I. However, if a sufficient portion of the channel liner is missing, then the tool "bottoms out" without making contact with the liner. The threaded portion of the tool should be extended all the way up to as close to the crosspin as possible; it doesn't even have to be threaded the entire way, just made the same diameter as the firing pin channel.

The second "flaw" (for lack of a better word) is that when installing the channel liner, if you want to tap on the tool you'll be making direct contact with the threads on the removal side of the tool. There could have been a striking surface manufactured into the tip of the threaded portion for that purpose. Use a leather mallet or similar and take care to protect the threads, because it's the leading threads--the ones you're pounding on--that dig into the channel liner for removal.

Now with all that said, this is a really slick tool, and as I already said, brilliantly designed. That is evident by the wing nut & non-marring plastic washer that is used to initially dislodge the channel liner, and the crosspin to give you a good yanking grip. It's kind of a shame that it only has one specific use (and something you'll do rarely at that, unless maybe you're a professional refinisher), but it is THE right tool for the job.

No design flaw after all (08.03.2018)

I would like to rescind my earlier review of this product. It turns out that the reason the tool was bottoming out is because there wasn't any channel liner installed in the slide at all. I assumed there was because I couldn't get the new channel liner installed, as if it was being blocked by something. The slide is at fault here, not the tool (by the way, it's a 3rd-party slide, not OEM). So the only design flaw this tool has is that you have to tap on the threads in order to install the channel liner. It's a real simple tool to use, and it works well. By the way, another reviewer complained that the tool damaged the channel liner when removing it. There's only two reasons (that I can think of) why you'd ever want to remove the channel liner. First, it's damaged and needs to be replaced. In that case, what does it matter if the tool damages an already-damaged channel liner? Second, you're refinishing the slide and the liner has to be removed before doing so. If you're investing all the time and expense to refinish a gun--assuming it's a real finish and not spray paint :-)--I think you can afford an extra three-and-a-half bucks or less for a new channel liner. It's just a part of the total refinishing cost.

Les 4 flere anmeldelser fra brownells.com

494 494 1 NOK

777100017
Channel Liner Tool for GLOCK
Produsentnr.: G1 Det samme verktøyet brukes på Glock fabrikken å presist fjerne og installere tennål kanal duken. Dette disponibel delen, i lysbildet må fjernes og en ny installert, når rebluing eller refinishing Glock lysbilder. Lett-å-bruk verktøyet vil ikke skade eller merke lysbildet. Inneholder instruksjoner, en tråd beskytter, pluss en kanal liner.

494 NOK 51 kr 494,00 *

10+ på lager

Spesifikasjoner: Make: Glock Model: Universal Handguns

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Glock Model: Universal Handguns

Elementdetaljer

Made in USA

Removes & Installs The Liner, Without Slide Damage

SPECS: Steel, blue. 6" (15cm) long. Fits all models of Glock pistols.

Mer...

Fjerner & installerer duken, uten lysbildet skade

Spesifikasjoner: stål, blå. 6"(15cm) lang. Passer alle modeller av Glock pistoler.

Mer...

Kundevurderinger for Channel Liner Tool for GLOCK

Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 4,5

Handy tool, makes the job easier (15.09.2009)

Excellent channel liner tool! (01.01.2018)

Slick Tool (07.03.2018)

No design flaw after all (08.03.2018)

Les 4 flere anmeldelser fra brownells.com

Kunder kjøpte også

Sale

Off. ACP Grip Panels
1911 MODULAR HANDGUN GRIPS

PEARCE GRIP

På lokalt lager

kr 73,00 * kr 73,00 - kr 199,00*

Veil. pris kr 198,00

Grep

4,2 (5)

Bolt Head, Magnum, Right Hand

SAVAGE

Kan restnoteres

kr 407,00 *

Bolter

0 (0)

Vickers Tactical Ext Mag Release for Glock® 20,21,29,30
VICKERS GLOCK® EXTENDED MAGAZINE RELEASE

TANGODOWN

Kan restnoteres

kr 303,00 * kr 257,00 - kr 342,00*

Magasinutløsere

4,1 (46)

AR-15 Magazine 9mm 32rd Steel Gray
AR-15 32RD COLT STYLE MAGAZINE 9MM

METALFORM

10+ på lager

kr 536,00 *

Magasiner

4,7 (12)

.458 SOCOM Stripped Upper Receiver Aluminum Black
458 SOCOM STRIPPED UPPER RECEIVER

ANDERSON MANUFACTURING

10+ på lager

kr 1 319,00 *

Uppere

0 (0)

Logg inn

Glemt passord?
Registrere

CONNECT

Facebook

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.

Priser inkl. mva. pluss levering

Klassisk visning

Mobilvisning