“M27” inspired 5.56x45mm Barrel for the BRN-4™ platform Not previously available in this configuration, the BRN-4 M27 16.5 inch 5.56x45mm NATO chrome lined barrel features a forward mounted bayonet lug. Manufactured by Faxon for Brownells, these manganese phosphate barrels are machined from 4150 chrome moly steel, and feature a precision buttoned rifle 1-7 twist bore with chrome lined 5.56x45mm NATO chamber. The bayonet lug attaches after installation of the gas block. The bayonet lug installs the same way as the gas block, with a simple coil pin driven in from the side. This makes for an extremely robust mount for a bayonet. Be sure to use a BRN-4 16” gas block for this barrel. The muzzle features ½-28 threads, so it can accept the standard A2 flash hider found on the M27, or any common aftermarket AR15 muzzle device. Barrel extension has M4 feed ramps to accept a wide variety of 223 or 5.56 ammunition. Compatible with the Brownells BRN-4 upper receiver group, and is also compatible with HK®, 416, MR556 and MR223 platforms.
Oppdag den nye BRN-4 M27 16.5" 5.56 krombelagte løpet!
“M27” inspirert 5.56x45mm løpet for BRN-4™ plattformen. Ikke tidligere tilgjengelig i denne konfigurasjonen, BRN-4 M27 16.5 tommer 5.56x45mm NATO krombelagt løpet har et fremover montert bajonettfeste.
Produsert av Faxon for Brownells, disse mangan fosfatløpene er maskinert fra 4150 krom moly stål, og har en presisjons knappenål rifle 1-7 vridning med krombelagt 5.56x45mm NATO kammer. Bajonettfestet monteres etter installasjon av gassblokken. Bajonettfestet installeres på samme måte som gassblokken, med en enkel spiralpinne drevet inn fra siden. Dette gir en ekstremt robust feste for en bajonett.
Husk å bruke en BRN-4 16” gassblokk for dette løpet. Munnstykket har ½-28 gjenger, så det kan akseptere standard A2 blitsbeskytter som finnes på M27, eller enhver vanlig ettermarked AR15 munnstykk enhet.
Løpsforlengelsen har M4 matetrinn for å akseptere et bredt utvalg av 223 eller 5.56 ammunisjon. Kompatibel med Brownells BRN-4 øvre mottakergruppe, og er også kompatibel med HK®, 416, MR556 og MR223 plattformer.