Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

FULTON ARMORY
ARMORY M1 GARAND GAS CYLINDER WRENCH

100000792

No-Mar Field Disassembly For Cleaning & Maintenance

Supports the gas cylinder and keeps it from rotating when removing the gas plug. Lets you easily separate these parts at home or in the field, without damage.

SPECS: Aluminum, anodized, blue. 5¾" (14.6cm) long, 1½" (3.8cm) wide, ¼" (6.3mm) thick.

Mer...

Skadefri felt demontering for rengjøring og vedlikehold

Støtter gassylinderen og hindrer den i å rotere når gasspluggen fjernes. Lar deg enkelt skille disse delene hjemme eller i felt, uten skade.

SPECS: Aluminium, anodisert, blå. 14,6 cm lang, 3,8 cm bred, 6,3 mm tykk.

Mer...

Kundevurderinger for FULTON ARMORY M1 GARAND GAS CYLINDER WRENCH

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Just right for the job (03.12.2009)

Perfectly sized for fit, simple tool for a job that in the past I've considered using pliers!

Good tool (27.02.2010)

Works like a champ. Gives you something to hang on to for those tough ones.

This Wrench is Made by People who Use IT (23.06.2010)

Like most things made by Fulton Armory, this wrench has always worked. It does not scratch or mar the finish while using it. My wrench has seen a lot of use and is still going. It has never NOT fit any of the different manufacturer's weapons I own including Armscorp, LRB Arms SA M-14, Low number pre ban Springfield Armory Inc. weapons, as well as new Springfield Armory Inc. weapons.

Needs no modification (18.07.2010)

It does what it says it does without a flaw.

Do not buy for M1A Loaded (22.04.2011)

This did not work on my Loaded M1A. In fact, it wouldn't even fit over the gas cylinder. I am not sure if the loaded models with the National Match barrels on them have a larger gas cylinder or not, but, this was not even close. I did finally get it to fit after some slight modifications with a dremel, but, instead of helping me, it literally just bent out of shape and marred the finish of the rifle. I certainly do not have super-human strength, but, this bent very easily under strain. Beware...

Works on Garand but not my M-14 (27.07.2011)

Works fine on my Garand but does not fit my M-14. Material is a bit soft, simply dropping it causes a ding. A simple, cheap tool.

will need a little modification (07.04.2016)

This would not fit a few gas cylinder locks that I have but with a little dressing with fine grit sandpaper, clearance should be ok. My regret is removing the anodizing on the bearing surfaces. Won't affect function, just appearance.

Les 7 flere anmeldelser fra brownells.com

389 389 1 NOK

Produktnr.: 100000792
FULTON ARMORY M1 GARAND GAS CYLINDER WRENCH
Produsentnr.: A211G Støtter gassylinderen og hindrer den i å rotere når gasspluggen fjernes. Lar deg enkelt skille disse delene hjemme eller i felt, uten skade.

389 NOK 0 kr 389,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: Springfield Modell: M1 Garand

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: Springfield Modell: M1 Garand Leveringsvekt: 0,045kg Frakthøyde: 13mm Fraktbredde: 130mm Fraktlengde: 160mm

Elementdetaljer

Made in USA

No-Mar Field Disassembly For Cleaning & Maintenance

Supports the gas cylinder and keeps it from rotating when removing the gas plug. Lets you easily separate these parts at home or in the field, without damage.

SPECS: Aluminum, anodized, blue. 5¾" (14.6cm) long, 1½" (3.8cm) wide, ¼" (6.3mm) thick.

Mer...

Skadefri felt demontering for rengjøring og vedlikehold

Støtter gassylinderen og hindrer den i å rotere når gasspluggen fjernes. Lar deg enkelt skille disse delene hjemme eller i felt, uten skade.

SPECS: Aluminium, anodisert, blå. 14,6 cm lang, 3,8 cm bred, 6,3 mm tykk.

Mer...

Kundevurderinger for FULTON ARMORY M1 GARAND GAS CYLINDER WRENCH

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Just right for the job (03.12.2009)

Perfectly sized for fit, simple tool for a job that in the past I've considered using pliers!

Good tool (27.02.2010)

Works like a champ. Gives you something to hang on to for those tough ones.

This Wrench is Made by People who Use IT (23.06.2010)

Needs no modification (18.07.2010)

It does what it says it does without a flaw.

Do not buy for M1A Loaded (22.04.2011)

Works on Garand but not my M-14 (27.07.2011)

Works fine on my Garand but does not fit my M-14. Material is a bit soft, simply dropping it causes a ding. A simple, cheap tool.

will need a little modification (07.04.2016)

Les 7 flere anmeldelser fra brownells.com

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.