ARCALOCK 17" UNIVERSAL FLAT RAIL W/MLOK HARDWARE Area 419 is always looking for ways to improve existing products when Area 419 are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, they saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp* *MLOK Hardware included.* Rail Features: Serrated rail sides interface with Area 419’s proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp, will not damage bags or your hands. Rail is backwards compatible with standard Arca accessories, but will not be locking without their clamp Rail is 17″ long giving you the entire length of the stock forend for attachments. Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way. Spacers for rifle stocks with non-flat forends are available HERE Designed to attach to the rifle up to 4 places for maximum strength and stability. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Made in-house here in the USA from USA sourced Aluminum on USA made CNCs Notes Rail comes with extra Remington 700-style action screw of extended length to fit the rail to the front action screw attachment point. Some trimming will likely be required. A 3/4″ paddle bit and drill press may be required for installation of tee-nuts, depending on current rifle configuration. Tee nuts and hardware included.
Oppdag ARCALOCK 17" UNIVERSAL FLAT RAIL W/MLOK HARDWARE fra AREA 419
ARCALOCK 17" UNIVERSAL FLAT RAIL W/MLOK HARDWARE er designet for å forbedre eksisterende produkter og møte behovene til presisjonsrifle entusiaster. Med den økende populariteten av ARCA-skinner, har Area 419 utviklet en løsning som mekanisk låser skinnen på plass, i stedet for bare å stole på friksjon.
Produktfunksjoner:
- Serraterte sider på skinnen griper inn i Area 419s proprietære klemme-design for å mekanisk låse den på plass, slik at det ikke er mulig med bevegelse.
- Serrasjonene er ikke skarpe og vil ikke skade sekker eller hender.
- Skinnen er bakoverkompatibel med standard Arca-tilbehør, men vil ikke låse uten deres klemme.
- Skinnen er 17″ lang, noe som gir deg hele lengden på forenden til riflen for feste.
- Den er laget etter RRS 1.5″ Dovetail Standard, så du kan være sikker på at klemmen fungerer.
- Ingen skarpe kanter. Hver hjørne er avrundet, og hver kant er faset på maskinen. Dette tar lengre tid å lage, men det er den eneste riktige måten.
- Spacere for riflestokker med ikke-flate forender er tilgjengelige HER.
- Designet for å feste til riflen på opptil 4 steder for maksimal styrke og stabilitet.
- Type 3 Hard Coat anodisert for ekstra holdbarhet.
- Laget av 6061-T6 aluminium.
- Laget her i USA av aluminium fra USA på CNC-maskiner laget i USA.
Notater:
- Skinnen leveres med ekstra Remington 700-stil action skrue av forlatt lengde for å passe skinnen til festepunktet for frontaction-skrue. Noe trimming kan være nødvendig.
- En 3/4″ paddle bit og boremaskin kan være nødvendig for installasjon av tee-nuts, avhengig av nåværende riflekonfigurasjon.
- Tee-nuts og tilbehør er inkludert.