Flip-up sights deploy with the flick of a finger to provide instant back-up, so you stay in the fight if your optic or laser sight fails. Super-smooth pivot mechanism with sturdy ball-bearing detent locks positively in the raised position and stays locked until you hit the pushbutton release. Sight folds down neatly out of your sight path when not in use. Machined from high-quality 6061 T6 aluminum and hardcoat anodized for increased wear-resistance. Hex wrench included with all models for easy installation. Rear Sights clamp securely to flattop receivers. Flip-style A2 aperture features a small peep opening for long-range daylight shots and a large opening for close-range and low-light work. Same-plane calibration ensures the point of impact will not change when switching from one aperture to the other. Deeply grooved knob provides positive clicks for windage adjustment in .65 MOA increments on rifles and carbines with 16" barrels and .49 MOA on rifles with 20" barrels. MCTAR-ERS - Emergency Rear Sight with protective “ears” to guard the aperture from accidental damage. Aperture has .060" and .200" diameter peep openings; same windage knob as standard A2 sight.
SPECS: Aluminum, hardcoat anodized, Black. Fits flattop AR-15/M16 rifles. MCTAR-ERS - 13⁄8" (3.5cm) long, 13⁄8" wide, 1¾" (4.4cm) high deployed, 1" (2.5cm) high folded. 2.2 oz. (61g) weight.
Mer...
Øyeblikkelig sikkerhetskopiering på alle områder
Flip-up severdigheter distribueres med en fingerspiss for å gi øyeblikkelig sikkerhetskopi, slik at du holder deg i kampen hvis optikken eller lasersiktet svikter. Superglatt dreiemekanisme med solid kulelager-lås låses positivt i hevet stilling og forblir låst til du treffer trykknappen. Sikt brettes pent ut av synsstien når den ikke er i bruk. Maskinert av 6061 T6 aluminium av høy kvalitet og hardlakk anodisert for økt slitestyrke. Sekskantnøkkel inkludert i alle modeller for enkel montering. Bakre sider klemmes sikkert til flattop-mottakere. Flip-style A2 blenderåpning har en liten kikkåpning for dagslysbilder og en stor åpning for nært hold og lite lys. Kalibrering av samme plan sørger for at støtpunktet ikke endres når du bytter fra en blenderåpning til den andre. Dyp rillet knopp gir positive klikk for justering av vindmengden i .65 MOA-trinn på rifler og karbiner med 16 "fat og .49 MOA på rifler med 20" fat. MCTAR-ERS - Nød bakfra med beskyttende "ører" for å beskytte blenderåpningen mot utilsiktet skade. Blenderåpningen har peepåpninger med en diameter på 0,060 "og. 200"; samme vindusvred som standard A2-sikt.
SPECS: Aluminium, hardlakk anodisert, svart. Passer flattop AR-15 / M16 rifler. MCTAR-ERS - 3,5 cm lang, 13,8 cm bred, 4,6 cm høy utbredt, 2,5 cm høy brettet. 2,2 oz. (61 g) vekt.
Mer...
Kundevurderinger for MIDWEST INDUSTRIES, INC. AR-15 FLIP-UP ADJUSTABLE MCTAR-ERS REAR SIGHT BLACK
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 2,3
Quality sight, but...(21.10.2009)
This sight is well made, good quality with nice fit and finish. It fits my AR good and works great. My only complaint is that the adjustment knob is too big. You really need to flip the sight up before you can charge your gun, or the sight gets in your way. An adjustment more like on a Troy sight would be nice.
CHEAP!(15.11.2009)
Work well for the first 3 times I used it. Then it just fell off in the middle of shooting one day. I lost some of the parts in the grass, and it is cheaper just to buy a new one.
I recomend magpul's MBUS. It has less moving parts, is simple, and a lot more durable.
Slightly Below Average(02.08.2012)
The Midwest Industries MCTAR ERS is slightly below average in terms of flip-up iron sights. On the positive side, this BUIS has thick metal ears does give the user an "A2" style sight picture and is made of thick metal. The adjustment knob is large and easy to use as well. The problems I had with this sight mainly revolved around the pin that locks the folding portion of the sight into the upright position. This pin wears down the aluminum around it, and after flipping it up and down a few times the wear was already noticeable. This weak point is also noticeable when the user adjusts the dial and the folding portion of the sight moves in the direction of the adjustment rather than staying still. Lastly this sight's aperture appeared canted on when transfered for one rifle to another. While I found this sight to be roughly adequate, and preferable to no BUIS at all, the design has noticeable flaws. Perhaps if this sight was $40 or less it would be a good deal, but for what it costs there are far better options available.
Produktnr.: 100001992 MIDWEST INDUSTRIES, INC. AR-15 FLIP-UP ADJUSTABLE MCTAR-ERS REAR SIGHT BLACK Produsentnr.: MCTARERSBLK816537011002 Flip-up severdigheter distribueres med en fingerspiss for å gi øyeblikkelig sikkerhetskopi, slik at du holder deg i kampen hvis optikken eller lasersiktet svikter. Superglatt dreiemekanisme med solid kulelager-lås låses positivt i hevet stilling og forblir låst til du treffer trykknappen. Sikt brettes pent ut av synsstien når den ikke er i bruk. Maskinert av 6061 T6 aluminium av høy kvalitet og hardlakk anodisert for økt slitestyrke. Sekskantnøkkel inkludert i alle modeller for enkel montering. Bakre sider klemmes sikkert til flattop-mottakere. Flip-style A2 blenderåpning har en liten kikkåpning for dagslysbilder og en stor åpning for nært hold og lite lys. Kalibrering av samme plan sørger for at støtpunktet ikke endres når du bytter fra en blenderåpning til den andre. Dyp rillet knopp gir positive klikk for justering av vindmengden i .65 MOA-trinn på rifler og karbiner med 16 "fat og .49 MOA på rifler med 20" fat. MCTAR-ERS - Nød bakfra med beskyttende "ører" for å beskytte blenderåpningen mot utilsiktet skade. Blenderåpningen har peepåpninger med en diameter på 0,060 "og. 200"; samme vindusvred som standard A2-sikt.
2149NOK3kr 2 149,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Flip-up sights deploy with the flick of a finger to provide instant back-up, so you stay in the fight if your optic or laser sight fails. Super-smooth pivot mechanism with sturdy ball-bearing detent locks positively in the raised position and stays locked until you hit the pushbutton release. Sight folds down neatly out of your sight path when not in use. Machined from high-quality 6061 T6 aluminum and hardcoat anodized for increased wear-resistance. Hex wrench included with all models for easy installation. Rear Sights clamp securely to flattop receivers. Flip-style A2 aperture features a small peep opening for long-range daylight shots and a large opening for close-range and low-light work. Same-plane calibration ensures the point of impact will not change when switching from one aperture to the other. Deeply grooved knob provides positive clicks for windage adjustment in .65 MOA increments on rifles and carbines with 16" barrels and .49 MOA on rifles with 20" barrels. MCTAR-ERS - Emergency Rear Sight with protective “ears” to guard the aperture from accidental damage. Aperture has .060" and .200" diameter peep openings; same windage knob as standard A2 sight.
SPECS: Aluminum, hardcoat anodized, Black. Fits flattop AR-15/M16 rifles. MCTAR-ERS - 13⁄8" (3.5cm) long, 13⁄8" wide, 1¾" (4.4cm) high deployed, 1" (2.5cm) high folded. 2.2 oz. (61g) weight.
Mer...
Øyeblikkelig sikkerhetskopiering på alle områder
Flip-up severdigheter distribueres med en fingerspiss for å gi øyeblikkelig sikkerhetskopi, slik at du holder deg i kampen hvis optikken eller lasersiktet svikter. Superglatt dreiemekanisme med solid kulelager-lås låses positivt i hevet stilling og forblir låst til du treffer trykknappen. Sikt brettes pent ut av synsstien når den ikke er i bruk. Maskinert av 6061 T6 aluminium av høy kvalitet og hardlakk anodisert for økt slitestyrke. Sekskantnøkkel inkludert i alle modeller for enkel montering. Bakre sider klemmes sikkert til flattop-mottakere. Flip-style A2 blenderåpning har en liten kikkåpning for dagslysbilder og en stor åpning for nært hold og lite lys. Kalibrering av samme plan sørger for at støtpunktet ikke endres når du bytter fra en blenderåpning til den andre. Dyp rillet knopp gir positive klikk for justering av vindmengden i .65 MOA-trinn på rifler og karbiner med 16 "fat og .49 MOA på rifler med 20" fat. MCTAR-ERS - Nød bakfra med beskyttende "ører" for å beskytte blenderåpningen mot utilsiktet skade. Blenderåpningen har peepåpninger med en diameter på 0,060 "og. 200"; samme vindusvred som standard A2-sikt.
SPECS: Aluminium, hardlakk anodisert, svart. Passer flattop AR-15 / M16 rifler. MCTAR-ERS - 3,5 cm lang, 13,8 cm bred, 4,6 cm høy utbredt, 2,5 cm høy brettet. 2,2 oz. (61 g) vekt.
Mer...
Kundevurderinger for MIDWEST INDUSTRIES, INC. AR-15 FLIP-UP ADJUSTABLE MCTAR-ERS REAR SIGHT BLACK
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 2,3
Quality sight, but...(21.10.2009)
This sight is well made, good quality with nice fit and finish. It fits my AR good and works great. My only complaint is that the adjustment knob is too big. You really need to flip the sight up before you can charge your gun, or the sight gets in your way. An adjustment more like on a Troy sight would be nice.
CHEAP!(15.11.2009)
Work well for the first 3 times I used it. Then it just fell off in the middle of shooting one day. I lost some of the parts in the grass, and it is cheaper just to buy a new one.
I recomend magpul's MBUS. It has less moving parts, is simple, and a lot more durable.
Slightly Below Average(02.08.2012)
The Midwest Industries MCTAR ERS is slightly below average in terms of flip-up iron sights. On the positive side, this BUIS has thick metal ears does give the user an "A2" style sight picture and is made of thick metal. The adjustment knob is large and easy to use as well. The problems I had with this sight mainly revolved around the pin that locks the folding portion of the sight into the upright position. This pin wears down the aluminum around it, and after flipping it up and down a few times the wear was already noticeable. This weak point is also noticeable when the user adjusts the dial and the folding portion of the sight moves in the direction of the adjustment rather than staying still. Lastly this sight's aperture appeared canted on when transfered for one rifle to another. While I found this sight to be roughly adequate, and preferable to no BUIS at all, the design has noticeable flaws. Perhaps if this sight was $40 or less it would be a good deal, but for what it costs there are far better options available.