Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

KNS PRECISION
AR-15/M16 NON-ROTATING PIN SET

851876003226 923000040

Precision-Machined To Upgrade Your Existing Hammer & Trigger Pins; Available Standard & Oversized

Redesigned hammer pin and anti-rotation links provide the strongest possible system to eliminate pin rotation, and will withstand the additional force exerted by 9mm conversions and suppressed .223 upper receivers. Helps prevent wear to receiver holes, which is especially important for increasingly-valuable M16 and pre-ban receivers. Notched hammer pin locks into slots in the anti-rotation links; trigger is secured with locking screws, and includes lube ports so adequate lubrication reaches the trigger. Anti-rotation links fit on the outside of the receiver to prevent all movement. Pins are CNC-machined, centerless ground for uniformity and heat treated for durability. Available in Standard .154", Oversized .155", and .170" for larger receivers. Oversized Pins help improve accuracy and trigger control by tightening up any trigger slack that may exist in worn or new receivers. Standard-sized pins drop-in and require no modification to the receiver; oversized pins require the use of the 3.95mm Reamer (available separately).

SPECS: 416 stainless steel pins. .900” (22.8mm) long, .154" (3.91mm), .155" (3.93mm), or .170" (4.31mm) diameter. Set includes (1) hammer pin, (1) trigger pin, (2) screws, (2) anti-rotation links, hex wrenches, and installation tool. Anti-Rotation Links - Steel, Parkerized finish. Retaining Screws - Steel, black oxide finish.

Mer...

Presisjonsmaskinerte For Å Oppgradere Dine Eksisterende Hammer & Avtrekkerpinner; Tilgjengelig Standard & Overdimensjonerte

Redesignet hammerpin og anti-rotasjonslenker gir det sterkeste mulige systemet for å eliminere pinrotasjon, og vil tåle den ekstra kraften som utøves av 9mm konverteringer og dempede .223 øvre mottakere. Hjelper med å forhindre slitasje på mottakerhullene, noe som er spesielt viktig for stadig mer verdifulle M16 og pre-ban mottakere. Hakkede hammerpinner låses inn i spor i anti-rotasjonslenkene; avtrekkeren sikres med låseskruer, og inkluderer smøreporter slik at tilstrekkelig smøring når avtrekkeren. Anti-rotasjonslenker passer på utsiden av mottakeren for å forhindre all bevegelse. Pinnene er CNC-maskinerte, senterløst slipte for uniformitet og varmebehandlet for holdbarhet. Tilgjengelig i Standard .154", Overdimensjonert .155", og .170" for større mottakere. Overdimensjonerte Pins hjelper med å forbedre nøyaktighet og avtrekkerkontroll ved å stramme opp eventuell avtrekkerslakk som kan eksistere i slitte eller nye mottakere. Standardstørrelse pins dropper-inn og krever ingen modifikasjon til mottakeren; overdimensjonerte pins krever bruk av 3.95mm Reamer (tilgjengelig separat).

SPECS: 416 rustfritt stål pins. .900” (22.8mm) lange, .154" (3.91mm), .155" (3.93mm), eller .170" (4.31mm) diameter. Settet inkluderer (1) hammer pin, (1) avtrekkerpin, (2) skruer, (2) anti-rotasjonslenker, unbrakonøkler, og installasjonsverktøy. Anti-Rotasjonslenker - Stål, Parkerisert finish. Bevaringsskruer - Stål, svart oksid finish.

Mer...

Kundevurderinger for KNS PRECISION .155" NON-ROTATING PINS

Antall vurderinger: 17
Fra brownells.com: 17
Gjennomsnittsvurdering: 4,9

Stop walking in it's tracks (06.11.2009)

Very easy to install with no extra tools needed. Stops pin walking and slack at the same time for better shots.

Look at description not picture (27.02.2012)

This kit comes .1555 pins, the side plates and screws, NOT the slightly larger pins and reamer as pictured. I used this to tighten up a JP trigger that was installed in an old receiver that had at one time had oversized pins. The slop made for an inconsistent trigger pull. The KNS kit took care of it, but don't expect miracles. If you are doing a new build and have spec trigger parts, save your money - this won't do much for you.

Works well... (26.06.2017)

I am a certified AR-15 / M-16 Armorer and work as an armorer for my police department. I purchased this pin set for a carbine build I am doing. packaging was okay (plastic bag) but came with no instructions other then a poor picture. installed nicely with no problems. quality is good. I only gave 4 stars to to lack of instructions to install.

Great product (16.12.2009)

If you are adding A drop in trigger this is a must. Over 2000 rounds with no problems.

Very Pleased (05.03.2010)

Put this on my Smith and Wesson M&P. Works great and gives the carbine a custom look to boot.

Outstanding item! (17.07.2010)

Works exceptionally well, installed on my LE M4, full auto and burst with no problems. The pins no longer slip out! Extremely easy to install!

Excellent (29.07.2010)

Easy installation and if you have trouble there is a good youtube video over it done by KNS. Great Product

Excellent product, no problems (02.05.2011)

I mounted these to a Doublestar lower receiver with a Jard trigger. Superb!

I prefer these over JP anti-rotating pins.

Wow much better then stock pins (26.01.2012)

I replaced the stock trigger, hammer pines in a Rock River lower with a Timmney 3lbs dropin trigger , man what a differance just changing the pines. I have the ultimate woodchock trigger now.Also did wonders for S&W 15-22 wow. you can,t go wrong with these.

Well designed and look great (06.03.2012)

Probably the best non rotating pins around. I shortened them slightly so there was no gap between receiver and the locking plates. Very nice

A must to have if you like your rifle (22.04.2012)

This is one of those products that they actually thought it through. Installation is fast and simple. If you are replacing existing pins, just push the existing pins out with the new pins. fast, simple and will save the lower reciever from excessive wear. noticably improves the trigger feel also. They are pricey for PINS but in the long run, worth every dime. They look great,extremely well made, are funtional, and will add value to your rifle.

Worth it (04.08.2012)

These pins cleaned up my trigger pull more than I would have thought they would. All the typical AR grittiness is gone, creep is almost gone. Trigger has a lighter feel as a result. Should significantly improve the reliability/durability of the rifle. Look cool too. Absolutely worth the money.

You should try these pins (24.07.2013)

I have several sets of KNS pins and they are an excellent and easy way to eliminate most of the creep in standard triggers. As a gunsmith and Law Enforcement armorer I highly recommend them for standard triggers and I even use them with Rock River 2-stage triggers. Don't use with Geissele triggers, but they improve everything else.

Piece a Cake!! (04.12.2014)

Bought the Gen 2 recently and gave it 5 stars. So, on this build project I thought of throwing this one on. Again, it was a piece of cake. Really simple. It makes the rifle even look a tougher.

KNS 154" NR Pin Set (31.03.2016)

This is a must have item I believe, it is very easy to install. It looks great on the lower & holds trigger in place 100% of the time. This is a great item and I have used a lot of them, they are a really great product.

Gambled w/ geissele ssa-e and fit (23.09.2017)

I have a m&p 15 sport 2 with geissele ssa-e trigger and still had some wiggle/slop in the pins. Now all the Q&A says they don't work with this brand of trigger. Worked in my case when installed. Nice snug fit. tip I can give you is trigger pin start from right to left. Worked better in my situation. Then do the hammer pin. Kns pins did exactly what they were designed to do. No more slop/ wiggle with these pins!!!!!

Worked with my AR10 PSA gen2 lower (09.11.2017)

Installs easy and the screws came with dried up thread locker. Installed a Rise Armament trigger assembly and locked that in my AR10 receiver.

Les 17 flere anmeldelser fra brownells.com

749 749 2 NOK

Produktnr.: 923000040
KNS PRECISION .155" NON-ROTATING PINS
Produsentnr.: NRTHP1555 851876003226 Redesignet hammerpin og anti-rotasjonslenker gir det sterkeste mulige systemet for å eliminere pinrotasjon, og vil tåle den ekstra kraften som utøves av 9mm konverteringer og dempede .223 øvre mottakere. Hjelper med å forhindre slitasje på mottakerhullene, noe som er spesielt viktig for stadig mer verdifulle M16 og pre-ban mottakere. Hakkede hammerpinner låses inn i spor i anti-rotasjonslenkene; avtrekkeren sikres med låseskruer, og inkluderer smøreporter slik at tilstrekkelig smøring når avtrekkeren. Anti-rotasjonslenker passer på utsiden av mottakeren for å forhindre all bevegelse. Pinnene er CNC-maskinerte, senterløst slipte for uniformitet og varmebehandlet for holdbarhet. Tilgjengelig i Standard .154", Overdimensjonert .155", og .170" for større mottakere. Overdimensjonerte Pins hjelper med å forbedre nøyaktighet og avtrekkerkontroll ved å stramme opp eventuell avtrekkerslakk som kan eksistere i slitte eller nye mottakere. Standardstørrelse pins dropper-inn og krever ingen modifikasjon til mottakeren; overdimensjonerte pins krever bruk av 3.95mm Reamer (tilgjengelig separat).

749 NOK 3 kr 749,00 *

Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Make: AR-15 Leveringsvekt: 0,045kg Frakthøyde: 10mm Fraktbredde: 102mm Fraktlengde: 124mm

Elementdetaljer

Made in USA

Produktnr.: 923000036
KNS PRECISION .154" NON-ROTATING PINS
Produsentnr.: NRTHP154 851876003004 Redesignet hammerpin og anti-rotasjonslenker gir det sterkeste mulige systemet for å eliminere pinrotasjon, og vil tåle den ekstra kraften som utøves av 9mm konverteringer og dempede .223 øvre mottakere. Hjelper med å forhindre slitasje på mottakerhullene, noe som er spesielt viktig for stadig mer verdifulle M16 og pre-ban mottakere. Hakkede hammerpinner låses inn i spor i anti-rotasjonslenkene; avtrekkeren sikres med låseskruer, og inkluderer smøreporter slik at tilstrekkelig smøring når avtrekkeren. Anti-rotasjonslenker passer på utsiden av mottakeren for å forhindre all bevegelse. Pinnene er CNC-maskinerte, senterløst slipte for uniformitet og varmebehandlet for holdbarhet. Tilgjengelig i Standard .154", Overdimensjonert .155", og .170" for større mottakere. Overdimensjonerte Pins hjelper med å forbedre nøyaktighet og avtrekkerkontroll ved å stramme opp eventuell avtrekkerslakk som kan eksistere i slitte eller nye mottakere. Standardstørrelse pins dropper-inn og krever ingen modifikasjon til mottakeren; overdimensjonerte pins krever bruk av 3.95mm Reamer (tilgjengelig separat).

749 NOK 4 kr 749,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Make: AR-15

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Precision-Machined To Upgrade Your Existing Hammer & Trigger Pins; Available Standard & Oversized

Mer...

Presisjonsmaskinerte For Å Oppgradere Dine Eksisterende Hammer & Avtrekkerpinner; Tilgjengelig Standard & Overdimensjonerte

Mer...

Kundevurderinger for KNS PRECISION .155" NON-ROTATING PINS

Antall vurderinger: 17
Fra brownells.com: 17
Gjennomsnittsvurdering: 4,9

Stop walking in it's tracks (06.11.2009)

Very easy to install with no extra tools needed. Stops pin walking and slack at the same time for better shots.

Look at description not picture (27.02.2012)

Works well... (26.06.2017)

Great product (16.12.2009)

If you are adding A drop in trigger this is a must. Over 2000 rounds with no problems.

Very Pleased (05.03.2010)

Put this on my Smith and Wesson M&P. Works great and gives the carbine a custom look to boot.

Outstanding item! (17.07.2010)

Works exceptionally well, installed on my LE M4, full auto and burst with no problems. The pins no longer slip out! Extremely easy to install!

Excellent (29.07.2010)

Easy installation and if you have trouble there is a good youtube video over it done by KNS. Great Product

Excellent product, no problems (02.05.2011)

I mounted these to a Doublestar lower receiver with a Jard trigger. Superb!

I prefer these over JP anti-rotating pins.

Wow much better then stock pins (26.01.2012)

Well designed and look great (06.03.2012)

Probably the best non rotating pins around. I shortened them slightly so there was no gap between receiver and the locking plates. Very nice

A must to have if you like your rifle (22.04.2012)

Worth it (04.08.2012)

You should try these pins (24.07.2013)

Piece a Cake!! (04.12.2014)

Bought the Gen 2 recently and gave it 5 stars. So, on this build project I thought of throwing this one on. Again, it was a piece of cake. Really simple. It makes the rifle even look a tougher.

KNS 154" NR Pin Set (31.03.2016)

Gambled w/ geissele ssa-e and fit (23.09.2017)

Worked with my AR10 PSA gen2 lower (09.11.2017)

Installs easy and the screws came with dried up thread locker. Installed a Rise Armament trigger assembly and locked that in my AR10 receiver.

Les 17 flere anmeldelser fra brownells.com

Kunder kjøpte også

METALFORM AR-15 MAGAZINE 9MM 32RD STEEL GRAY
AR-15 32RD COLT STYLE MAGAZINE 9MM

METALFORM

Kommer til lager

kr 699,00 *

Magasiner | Magazines

4,7

LITTLE CROW GUNWORKS. 17 REMINGTON FIREBALL TRIM CHAMBER
WFT 2 TRIMMER

LITTLE CROW GUNWORKS.

På lager

kr 499,00 * kr 499,00 - kr 1 349,00*

Hylstrimmere

4,3

MAGPUL AR .308 PMAG LR/SR GEN M3 MAG 308 WIN 10RD POLYMER BLK 1PK
AR .308 10RD PMAG LR/SR GEN M3 MAGAZINE 308 WINCHESTER

MAGPUL

På lager

kr 479,00 *

Magasiner | Magazines

ED BROWN ALLEN HEAD GRIP SCREWS BLUED QUANITY 4
1911 ALLEN HEAD GRIP SCREWS

ED BROWN

På lager

kr 249,00 * kr 249,00 - kr 899,00*

Grepsskruer

4,2

1911 GRIP SCREW BUSHINGS - EGW GRIP SCREW BUSHINGS, BLUED

EGW GRIP SCREW BUSHINGS, BLUED
1911 GRIP SCREW BUSHINGS

EGW

På lager

kr 249,00 *

Gate foringer

4,7

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.