The DT-PR stock is the Precision Rifle (PR) variant of our new Dual-Tension (DT) series of carbine stocks. It incorporates Magpul’s proprietary, patent-pending DT adjustment system, mitigating play between the buffer tube and the stock, resulting in a tighter fit across the stock’s entire length of pull. It also minimizes snagging of facial hair and skin where the shooter’s face contacts the stock. The DT-PR has a contoured butt-pad for improved shoulder purchase and minimal contact with the collar bone, allowing shooters to maintain comfort during heads-up and heads-down shooting with various optics. The extended bottom of the stock provides shooters with an exceptionally steady contact point on squeeze bags for more precise shots when prone, while remaining entirely functional as an on-the-move tactical platform. The DT-PR includes an ambidextrous, rotation-limited QD cup for sling attachment. It's also compatible with Magpul’s legacy CTR Cheek Risers when the stock is fully extended or on rifles without rear-facing charging handles, giving shooters adjustable comb height for improved efficiency in target acquisition and field of view. For a lot less than other precision stocks, the DT-PR provides an incredibly steady platform combined with better control. Made in the USA. New LOP-adjustment Dual Tension system improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Improves ease of adjustment while securing LOP placement, limiting secondary movements, and improving durability Single, anti-snag ambidextrous control lever Unique stock shape aids in precision shooting Support-hand rest on front strap to minimize movement Bottom support acts as a bag rider for shooting rests Enhanced Ergonomics Non-slip rubber butt-pad with rollover on the toe Sloping cheek weld combines a slim profile with user comfort Side mounting slots accept optional CTR® Cheek Risers for use with a fully extended stock and on rifles without rear-facing charging handles Compatible with MOE SL® Enhanced Rubber Butt-Pad, 0.70" for additional LOP Sling Attachment Variety Compatible with Magpul ASAP®, ASAP® QD and other receiver-mount sling attachments Rear M-LOK slot functions as a footman's loop for direct sling attachment, and can also accept the optional M-LOK® QD Sling Mount for push-button swivels Rotation-limiting, integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous) Technical Specifications: Platform: AR10, AR15, M4, M16, M110, SR25 Compatibility: Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others* LOP, M4 Collapsed: ~11.0 in. LOP, M4 Extended: ~14.3 in. LOP Adjustment Range: 3.3 in. Length, max: 7.4 in. Height, max: 5.3 in. Width, max: 1.6 in. Other Specs: *Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer. NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The DT Carbine Stock will only fit with the common Mil-Spec tube.
Kompakt og presis: DT-PR CARBINE STOCK fra MAGPUL
DT-PR-stokken er Precision Rifle (PR) varianten av vår nye Dual-Tension (DT) serie med karabinstokker. Den inneholder Magpuls proprietære, patent-pågående DT justeringssystem, som reduserer bevegelse mellom bufferroret og stokken, noe som resulterer i en strammere passform over hele stokkens lengde. Den minimerer også fastkjøring av ansiktshår og hud der skytterens ansikt kommer i kontakt med stokken.
Funksjoner:
- Konturert bakstykke for forbedret skuldergrep og minimal kontakt med kragebenet, som gir skyttere komfort under både oppreist og liggende skyting med ulike optikker.
- Den utvidede bunnen av stokken gir skyttere et eksepsjonelt stabilt kontaktpunkt på klemposer for mer presise skudd når man ligger ned, samtidig som den forblir fullt funksjonell som en taktisk plattform i bevegelse.
- DT-PR inkluderer en ambidekstral, rotasjonsbegrenset QD-kopp for slyngefesting.
- Kompatibel med Magpuls legacy CTR Cheek Risers når stokken er helt utvidet eller på rifler uten bakovervendte ladingshåndtak, noe som gir skyttere justerbar kinnhøyde for bedre effektivitet i måltaking og synsfelt.
- For en mye lavere pris enn andre presisjonsstokker, gir DT-PR en utrolig stabil plattform kombinert med bedre kontroll.
- Produsert i USA.
Tekniske spesifikasjoner:
- Plattform: AR10, AR15, M4, M16, M110, SR25
- Kompatibilitet: Mil-Spec størrelse karabin mottakerforlengelse (ikke inkludert) fra produsenter som Colt, LMT, Ruger, S&W, SIG, og andre*
- LOP, M4 Sammenfoldet: ~11.0 in.
- LOP, M4 Utvidet: ~14.3 in.
- LOP Justeringsområde: 3.3 in.
- Lengde, maks: 7.4 in.
- Høyde, maks: 5.3 in.
- Bredde, maks: 1.6 in.
Merk: Det finnes to grunnleggende størrelser av M4 karabin mottakerforlengelser (bufferroret): Mil-Spec og Commercial-Spec. DT Carbine Stock vil kun passe med den vanlige Mil-Spec roret.
Hjelp og kontakt
Nyhetsbrev
Klassisk visning
Mobilvisning