Extra-Big Mag Well Lets You Insert Magazines On Feel Alone
Durable, black, polycarbonate mag well is oversized and ultra smooth on the inside for easy, friction-free magazine insertion. Easy-to-install, drop-in unit clamps together with three hex screws and makes it possible to change magazines without ever taking your eyes off your target! Black, matte finish matches most AR-15s.
SPECS: Polycarbonate, black, matte finish. Approximately 3-11/16" (9.4cm) wide, 11-5/16" (2.4cm) tall. 2.4 oz. (68 g) wt.
Mer...
Ekstra stor Mag-brønn lar deg sette inn magasiner på Feel Alone
Slitesterk, svart polykarbonat mag-brønn er overdimensjonert og ultra glatt på innsiden for enkel, friksjonsfri magasininnsetting. Enkel å installere, drop-in enhetsklemmer sammen med tre sekskantskruer og gjør det mulig å bytte magasiner uten å ta øynene opp av målet ditt! Svart, matt finish matcher de fleste AR-15-er.
SPECS: Polykarbonat, svart, matt overflate. Omtrent 3-11 / 16 "(9,4 cm) bred, 11-5 / 16" (2,4 cm) høy. 2,4 oz. (68 g) vekt
Mer...
Kundevurderinger for ARREDONDO AR-15 MAG WELL
Antall vurderinger: 8
Fra brownells.com: 6
Gjennomsnittsvurdering: 3,8
Fungerer meget godt.(03.01.2023)
Har montert denne på Mr223. Sitter som støpt og gjør det nærmest umulig å ikke få inn magasinet. Fungerer meg Magpul gen m3 magasiner.
Middels produkt med åpenbare mangler.(10.02.2022)
PASSER IKKE MED MAGPUL D60 ELLER GEN 2 OG GEN 3 magasin.
Kjempeenkel å installere. Fungerer flott med DD32, Lancer, HK416 og GI magasin. Men den passerer ikke med Magpul magasin, noe som er irriterende når det er den nåværende standarden. Jeg kommer til å ta noen gode drag med ei fil og tilpasse den slik at ihvertfall Gen 3 PMAG magasin passer.
It really really works(22.09.2010)
Always thought it was a race gun thingy not for a fighting gun. Bought it and installed it, like throwing a hot dog down a hallway. One of the true transitional pieces from the playing to the real world uses. Not a gimick, works so well it makes up for the ugliness.
works for Daewoo DR200 too*(19.04.2011)
I bought this with my Daewoo in mind, a test fit on the ar15 was perfect - no filing necessary. i always thought the daewoo magwell looked a little shallow & weak, well after some dremmel work (took about 3 minutes) it fit perfect. Gives you a much better hold if you prefer to grip the gun via magwell too. This does NOT interfere with mag changes on the Daewoo.
I will be ordering a second one to try it out on a M17s project next.
It's alright(12.11.2011)
It does not fit tight on my bushmaster and for some reason it won't work with 42 round mags
A MUST HAVE FOR COMPETITION SHOOTING(22.07.2014)
Is hard to believe that all competition shooters don't use these. This large magwell makes speed loading your AR a snap whether you're running, upright or prone. I have them on every AR that I own.
Not For Me(25.02.2015)
Not compatible with Bushmaster/Tangodown Mags
& extremely overpriced for a small piece of plastic
Does its job(11.05.2015)
Makes mag changes lightning fast and Effortless even under stress. Only bad things I found is how unattractive it is installed and I had to modify it to work with gen4 40 rd pmags as I didn't receive the latest version of magwell. Even with that said was easy to mod for 40 rd mags. Magwell was also easy to install.
Produktnr.: 069000007 ARREDONDO AR-15 MAG WELL Produsentnr.: ARMGW Slitesterk, svart polykarbonat mag-brønn er overdimensjonert og ultra glatt på innsiden for enkel, friksjonsfri magasininnsetting. Enkel å installere, drop-in enhetsklemmer sammen med tre sekskantskruer og gjør det mulig å bytte magasiner uten å ta øynene opp av målet ditt! Svart, matt finish matcher de fleste AR-15-er.
899NOK7kr 899,00
*
Leveringstid ca. 14-21 dager. 7 stk. på lageret i USA
Farge:
Black
Make:
AR-15
Leveringsvekt: 0,068kgHøyde: 41mmBredde: 84mmLengde: 122mm
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Extra-Big Mag Well Lets You Insert Magazines On Feel Alone
Durable, black, polycarbonate mag well is oversized and ultra smooth on the inside for easy, friction-free magazine insertion. Easy-to-install, drop-in unit clamps together with three hex screws and makes it possible to change magazines without ever taking your eyes off your target! Black, matte finish matches most AR-15s.
SPECS: Polycarbonate, black, matte finish. Approximately 3-11/16" (9.4cm) wide, 11-5/16" (2.4cm) tall. 2.4 oz. (68 g) wt.
Mer...
Ekstra stor Mag-brønn lar deg sette inn magasiner på Feel Alone
Slitesterk, svart polykarbonat mag-brønn er overdimensjonert og ultra glatt på innsiden for enkel, friksjonsfri magasininnsetting. Enkel å installere, drop-in enhetsklemmer sammen med tre sekskantskruer og gjør det mulig å bytte magasiner uten å ta øynene opp av målet ditt! Svart, matt finish matcher de fleste AR-15-er.
SPECS: Polykarbonat, svart, matt overflate. Omtrent 3-11 / 16 "(9,4 cm) bred, 11-5 / 16" (2,4 cm) høy. 2,4 oz. (68 g) vekt
Mer...
Kundevurderinger for ARREDONDO AR-15 MAG WELL
Antall vurderinger: 8
Fra brownells.com: 6
Gjennomsnittsvurdering: 3,8
Fungerer meget godt.(03.01.2023)
Har montert denne på Mr223. Sitter som støpt og gjør det nærmest umulig å ikke få inn magasinet. Fungerer meg Magpul gen m3 magasiner.
Middels produkt med åpenbare mangler.(10.02.2022)
PASSER IKKE MED MAGPUL D60 ELLER GEN 2 OG GEN 3 magasin.
Kjempeenkel å installere. Fungerer flott med DD32, Lancer, HK416 og GI magasin. Men den passerer ikke med Magpul magasin, noe som er irriterende når det er den nåværende standarden. Jeg kommer til å ta noen gode drag med ei fil og tilpasse den slik at ihvertfall Gen 3 PMAG magasin passer.
It really really works(22.09.2010)
Always thought it was a race gun thingy not for a fighting gun. Bought it and installed it, like throwing a hot dog down a hallway. One of the true transitional pieces from the playing to the real world uses. Not a gimick, works so well it makes up for the ugliness.
works for Daewoo DR200 too*(19.04.2011)
I bought this with my Daewoo in mind, a test fit on the ar15 was perfect - no filing necessary. i always thought the daewoo magwell looked a little shallow & weak, well after some dremmel work (took about 3 minutes) it fit perfect. Gives you a much better hold if you prefer to grip the gun via magwell too. This does NOT interfere with mag changes on the Daewoo.
I will be ordering a second one to try it out on a M17s project next.
It's alright(12.11.2011)
It does not fit tight on my bushmaster and for some reason it won't work with 42 round mags
A MUST HAVE FOR COMPETITION SHOOTING(22.07.2014)
Is hard to believe that all competition shooters don't use these. This large magwell makes speed loading your AR a snap whether you're running, upright or prone. I have them on every AR that I own.
Not For Me(25.02.2015)
Not compatible with Bushmaster/Tangodown Mags
& extremely overpriced for a small piece of plastic
Does its job(11.05.2015)
Makes mag changes lightning fast and Effortless even under stress. Only bad things I found is how unattractive it is installed and I had to modify it to work with gen4 40 rd pmags as I didn't receive the latest version of magwell. Even with that said was easy to mod for 40 rd mags. Magwell was also easy to install.