Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Norge

BATTLE ARMS DEVELOPMENT INC. AR-15 INVESTMENT CAST ENHANCED MAGAZINE RELEASE KIT


AR-15 Investment Cast Enhanced Magazine Release Kit

Auto-oversatt beskrivelse (Beskrivelse - Produsent): Battle Arms Development har gitt ut deres Enhanced Magazine Release Kit som består av Investment Cast Enhanced Magazine Catch, en Magazine Catch Spring og en billet-maskinert Enhanced Magazine Release! Battle Arms Development Enhanced Magazine Release Kit har Investment Cast Enhanced Magazine Catch som er laget av 8620 Heat Treated Steel, med en lett spaltet konstruksjon i ett stykke. Mer...

Produktnr.: 100025394 100025394
Battle Arms Development has released their Enhanced Magazine Release Kit that consists of the Investment Cast Enhanced Magazine Catch, a Magazine Catch Spring, and a billet machined Enhanced Magazine Release! The Battle Arms Development Enhanced Magazine Release Kit features the Investment Cast Enhanced Magazine Catch that is made of 8620 Heat Treated Steel, with a lightweight fluted one piece engineering. The Enhanced Magazine Release is CNC Machined from billet 7075-T6 Aluminum, and features a concave V-Groove button face that offers an excellent ergonomic feel. BATTLEARMS Enhanced Magazine Catch - BAD-EMC-IC Process: Investment Cast (Same Process as Mil-Spec) Material: 8620 Heat Treated Steel Finish: Black Phosphate Finish Construction: One Piece Engineering (Not Two-Piece) Design: Lightweight Fluted Design Compatibility: Compatible with Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc. Length: Shorter Threaded Pin to Reduce Installed Magazine Button Profile of Solid Face Magazine Release Buttons Weight: 0.25 oz (v.s. 0.32 oz Mil-Spec) BAD-EMR (Enhanced Magazine Release) for the AR15/AR10. Precision CNC Machined for billet 7075-T6 Aluminum (not 6061) in an anodized BLACK finish, the BAD-EMR features an unique, fully solid "V" shaped button face with horizontal serrations (no through hole). The concave V-Groove button face offers excellent ergonomic feel and self-centers the index finger as pressure is applied. The horizontal, parallel serrations helps slippage in the vertical orientation while minimizing drag in the horizontal direction for finger retraction. The BAD-EMR also features a lightweight skeletonized back to offset the weight gained from the fully solid button face and slightly increased height to equal the weight of the standard mil-spec magazine release (approximately 0.002 lbs). BAD-EMR is compatible with all lower receivers that accepts mil-spec magazine release buttons.
BATTLE ARMS DEVELOPMENT INC.
254 254 1 NOK
100025394
AR-15 Investment Cast Enhanced Magazine Release Kit
Produsentnr.: BADMRKPK1 Battle Arms Development har gitt ut deres Enhanced Magazine Release Kit som består av Investment Cast Enhanced Magazine Catch, en Magazine Catch Spring og en billet-maskinert Enhanced Magazine Release! Battle Arms Development Enhanced Magazine Release Kit har Investment Cast Enhanced Magazine Catch som er laget av 8620 Heat Treated Steel, med en lett spaltet konstruksjon i ett stykke. Enhanced Magazine Release er CNC-maskinert fra billet 7075-T6 Aluminium, og har en konkav V-Groove-knappeflate som gir et utmerket ergonomisk preg. BATTLEARMS Utvidet magasinfangst - BAD-EMC-IC-prosess: Investeringsstøping (samme prosess som Mil-Spec) Materiale: 8620 Varmebehandlet stålfinish: Svart fosfatfinish Konstruksjon: One Piece Engineering (Ikke todelt) Design: Lett rillet designkompatibilitet : Kompatibel med Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc. Lengde: Kortere gjengestift for å redusere installert Magazine Button-profil for Solid Face Magazine Release Buttons Vekt: 0,25 oz (vs 0,32 oz Mil-Spec) BAD -EMR (Enhanced Magazine Release) for AR15 / AR10. Presisjon CNC, maskinert for billet 7075-T6 aluminium (ikke 6061) i en anodisert SVART finish, har BAD-EMR et unikt, fullt solid "V" -formet knappeflate med horisontale takter (ikke gjennomgående hull). Det konkave V-Groove-knappenes ansikt gir utmerket ergonomisk følelse og selvsentrerer pekefingeren når trykk påføres. De horisontale, parallelle rissene hjelper til med å gli i den vertikale retningen mens du minimerer dra i horisontal retning for fingeropptak. BAD-EMR har også en lett skjelettisert rygg for å oppveie vekten som er oppnådd fra det helt solide knappens ansikt og litt økt høyde, slik at det tilsvarer vekten av standard mil-spec magasinutgivelse (ca. 0,002 pund). BAD-EMR er kompatibel med alle lavere mottakere som godtar mil-spec magasinutgivelsesknapper.
254 NOK 0 kr 254,00 *

Kan restnoteres
Spesifikasjoner: Make: AR-15

Vilkår for kjøp

  • USA eksportregler gjelder Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.



    This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Attributes

Make: AR-15

Elementdetaljer

Made in USA
ECCN: I(h)




Battle Arms Development has released their Enhanced Magazine Release Kit that consists of the Investment Cast Enhanced Magazine Catch, a Magazine Catch Spring, and a billet machined Enhanced Magazine Release! The Battle Arms Development Enhanced Magazine Release Kit features the Investment Cast Enhanced Magazine Catch that is made of 8620 Heat Treated Steel, with a lightweight fluted one piece engineering. The Enhanced Magazine Release is CNC Machined from billet 7075-T6 Aluminum, and features a concave V-Groove button face that offers an excellent ergonomic feel. BATTLEARMS Enhanced Magazine Catch - BAD-EMC-IC Process: Investment Cast (Same Process as Mil-Spec) Material: 8620 Heat Treated Steel Finish: Black Phosphate Finish Construction: One Piece Engineering (Not Two-Piece) Design: Lightweight Fluted Design Compatibility: Compatible with Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc. Length: Shorter Threaded Pin to Reduce Installed Magazine Button Profile of Solid Face Magazine Release Buttons Weight: 0.25 oz (v.s. 0.32 oz Mil-Spec) BAD-EMR (Enhanced Magazine Release) for the AR15/AR10. Precision CNC Machined for billet 7075-T6 Aluminum (not 6061) in an anodized BLACK finish, the BAD-EMR features an unique, fully solid "V" shaped button face with horizontal serrations (no through hole). The concave V-Groove button face offers excellent ergonomic feel and self-centers the index finger as pressure is applied. The horizontal, parallel serrations helps slippage in the vertical orientation while minimizing drag in the horizontal direction for finger retraction. The BAD-EMR also features a lightweight skeletonized back to offset the weight gained from the fully solid button face and slightly increased height to equal the weight of the standard mil-spec magazine release (approximately 0.002 lbs). BAD-EMR is compatible with all lower receivers that accepts mil-spec magazine release buttons.